TRENDnet TEW-670AP V1.xR
TRENDnet TEW-670AP V1.x
Manuf (OEM/ODM): Senao
Type: access point
FCC ID: XU8TEW670AP
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Ralink RT3052
CPU2: Ralink RT2880
FLA1: ? MiB (Brand? Model?)
RAM1: ? MiB (Brand? Model?)
Expansion IFs: none specified
Serial: yes, 4-pin header, internal, dual
WI1 chip1: Ralink RT3052
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: Ralink RT2880
WI2 chip2: Ralink RT2850
WI2 802dot11 protocols: an
WI2 MIMO config: 2x2:2
WI2 antenna connector: none
ETH chip1: Ralink RT3052
LAN speed: 100M
LAN ports: 1
abgn
Additional chips
2.4GHz Power Amplifier IC;Richwave;RTC6693;913, 6693, A943;2
5GHz Power Amplifier IC;Richwave;RTC6671;159, 6671, A931;2;
Stock bootloader: U-Boot
Stock FW OS: Linux
Default IP address: 192.168.10.100
the IP 192.168.10.100 is used by 13 additional devices
of which 13 are TRENDnet devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1321 additional devices
of which 49 are TRENDnet devices
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
300Mbps Concurrent Dual Band Wireless N Access Point
"7016A0266000 V1.00" is silkscreened on the board in the FCC photos.
- The same text is found on the TRENDnet TEW-671BR's board.
Addl. info, from the 671BR's entry...
- This device uses the RT3052 as the main processor. The RT2880 is operating in iNIC mode (operating as a NIC remotely via its MII interface).
- U-Boot is presumably used for the bootloader, the OS used is probably Linux
