TRENDnet TEW-753DAP

TRENDnet TEW-753DAP

Manuf (OEM/ODM): Senao

FCC approval date: 13 September 2013
Country of manuf.: Taiwan

Type: access point

Power: 12 VDC, 1.5 A
Connector type: barrel
PoE tag: 802.3af, standard

CPU1: Atheros AR9344
FLA1: 16 MiB 16,777,216 B 131,072 Kib 16,384 KiB 128 Mib 0.0156 GiB  (Macronix MX25L12845EMI-10G)
RAM1: 128 MiB 134,217,728 B 1,048,576 Kib 131,072 KiB 1,024 Mib 0.125 GiB  (Nanya NT5TU32M16DG-AC)

Expansion IFs: none specified
Serial: yes, 3.3V TTL

WI1 chip1: Atheros AR9344
WI1 802dot11 protocols: an
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
WI2 chip1: Atheros AR9382
WI2 802dot11 protocols: bgn
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL

ETH chip1: Atheros AR9344
ETH chip2: Atheros AR8035-A
LAN speed: 1G
LAN ports: 1

abgn

Additional chips
2.4GHz Power Amplifier IC;Microchip;SST12LP15A;SST, 12LP15A, 152A5M;2;InGaP/GaAs HBT;16-pin VQFN;
5GHz Power Amplifier IC;SiGe;SE2537L;SiGe, 2537L, <????>;2;;16-pin QFN;3 mm x 3 mm x 0.9 mm;

Default SSID: TRENDnet753_2.4GHz_XXXX
, TRENDnet753_5GHz_XXXX

802dot11 OUI: none specified

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

N600 High Power Dual Band PoE Access Point

"7016A0507001 Ver: 1.00" is silkscreened on the board in the FCC photos. This is the same text found on the Senao CAP4200AG and derivative models.

The 2.4GHz radio (AR9382-AL1) is using two Microchip (SST) SST12LP15A power amplifier ICs (marked "SST", "12LP15A", "152ASM").

The 5GHz radio (AR9344-BC2A) is using two Skyworks (SiGe) SE2537L / 2537L power amplifier ICs.

The Flash chip appears to be a MX25L12845EMI-10G (16 MB).

The power adapter in the FCC photos is a Powertron ELectronics Corp. PA1015-2I (100-240VAC ~ 50-60Hz, 0.4A -> 12VDC, 1.25A).

TRENDnet TEW-753DAP

Navigation menu

Search