Telsey CPVL7

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Telsey CPVL7 (2GGV)

(Est.) release date: November 2011
Country of manuf.: Italy

Type: wireless router, dsl modem, analog phone gateway, ONT

FCC ID: none available
PCB ID: TP460B2F

Power: 12 VDC, 2 A
Connector type: barrel

CPU1: Broadcom BCM6369 (400 MHz, 2 cores)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Spansion S29GL128P90TFCR1)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Hynix H5DU2562GTR × 2)

Expansion IFs: USB 2.0, SFP
USB ports: 2
SFP ports: 1

WI1 chip1: Ralink RT2860
WI1 chip2: Ralink RT2850
WI1 802dot11 protocols: abgn
WI1 MIMO config: 2x3:2
WI1 antenna connector: none

ETH chip1: Broadcom BCM6369
ETH chip2: Broadcom BCM54610
ETH chip3: Broadcom BCM54616S
Switch: Broadcom BCM6369
LAN speed: 100M
LAN ports: 4
WAN speed: 1G
WAN ports: 1

abgn

Additional chips
2ch FXS (8kHz, 100V) ABS VoicePort;Legerity (Microsemi);Le88266DLC;;1;

Flags: VDSL, ADSL2+, GPON, VoIP

802dot11 OUI: none specified

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.


Home Network Gateway

PCB has model number: Telsey TP460B2F

  • The BCM54616S is wired to an SFP for FTTH, with an unpopulated
footprint for magnetics and a RJ45 (which would allow gigabit?)
  • The BCM54610 is wired to the 1x WAN (GbE) port connector,
4x LAN ports are wired to SoC Broadcom BCM6369KPBG

These were used for 100Mbps FTTH service as a PON _only_ (wifi

and usb were disabled) by Gagnaveita Reykjavik in Iceland

They seem to have been used by Altibox in Norway,

and Amis in Slovenia as well

On an Icelandic box, the outside sticker declares the box to

be a CPL7, rather than the CPVL7.

CPVL7 is used on all internal firmware text, bootloader options,

and is the name used on overseas versions.

Serial

Serial console (115200, 8n1) is available, but requires both

adding and removing solder jumpers.

Images

Serial port close up