Tenda AC7
Tenda AC7 v1
FCC approval date: 08 May 2018
Country of manuf.: China
Series: AC1200
Type: wireless router
FCC ID: V7TAC7
Power: 9 VDC, 1 A
Connector type: barrel
CPU1: Realtek RTL8197FN (1 GHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Winbond Model?)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Realtek RTL8197FN)
Expansion IFs: none specified
WI1 chip1: Realtek RTL8197FN
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: Realtek RTL8812BR
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 2x2:2
WI2 antenna connector: none
ETH chip1: Realtek RTL8197FN
Switch: Realtek RTL8197FN
LAN speed: 100M
LAN ports: 3
WAN speed: 100M
WAN ports: 1
abgn+ac
Additional chips
5GHz Front-End Module;Skyworks;SKY85735-11;5735;2;
Flags: Wave2, MU-MIMO
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 54 are Tenda devices
802dot11 OUI: none specified
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
AC1200 Smart Dual-Band WiFi Router
FCC internal photos show that the fifth (center) antenna is used for 2.4GHz RX.
- The 2.4GHz Test Report document says that the equipment under test (EUT) is 2T2R
- so we'll still consider this device to be 2x2:2 although it could possibly be 2x3:2.
- Web GUI: http://tendawifi.com
