Tenda N3
Tenda N3
Type: wireless router
FCC ID: V7TN3
Power: 9 VDC, 0.6 A
Connector type: barrel
CPU1: Broadcom BCM5356C0 (300 MHz)
FLA1: 1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> (Macronix MX25L8006)
RAM1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (EtronTech EM638165TS)
Expansion IFs: none specified
WI1 chip1: Broadcom BCM5356C0
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none
ETH chip1: Broadcom BCM5356C0
LAN speed: 100M
LAN ports: 1
WAN speed: 100M
WAN ports: 1
bgn
Flags: schematics, block diagram
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 54 are Tenda devices
802dot11 OUI: none specified
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
150M Wireless Router
FCC
"N3" and "V1.0" is silkscreened on the board in the FCC photos.
- The schematics identify the SoC used as a BCM5357C0..
- but this is a dual-stream chip. It appears to instead use BCM5356B0.
Block diagram
- CPU: Broadcom BCM5356C0 @300MHz 2.4GHz 1T1R WiSoC
- Flash: Macronix MX25L8006 1MB SPI SOP8
- RAM: EtronTech EM638165TS 8MB SDRAM TSOP54
- Skyworks AS179 SPDT Switch
- Ryanair FR9882 DC/DC Converter
- GTM GTT3585 Power MOSFET TSSOP-6
Images