Tenda W3002R
Tenda W3002R
Type: wireless router
FCC ID: V7TW3002R
Power: 9 VDC, 1 A
Connector type: barrel
CPU1: Broadcom BCM5357C0
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Brand? Model?)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (EtronTech Model?)
Expansion IFs: none specified
WI1 chip1: Broadcom BCM5357C0
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
ETH chip1: Broadcom BCM5357C0
Switch: Broadcom BCM5357C0
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Flags: schematics, block diagram
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 54 are Tenda devices
802dot11 OUI: none specified
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Wireless N300 High Power Router
"10015133" and "V1.0" is silkscreened on the board in the FCC photos.
This device is using two Skyworks ( / SiGe) SE2605L / 2605L High Power 2.4GHz Power Amplifier ICs.
The device has 2MB Flash and 16MB RAM. (see W3002R bootlog in OpenWrt forum)
Likely C8:3A:35 OUI..