Tilgin HG2381
Tilgin HG2381
Availability: now
(Est.) release date: April 2014
Country of manuf.: China
Series: AC1600
Type: wireless router
Power: ? VDC, ? A
Connector type: barrel
CPU1: Lantiq PXB 4389-720 (720 MHz)
FLA1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Winbond W29N01HVSINA)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (EtronTech EM68C16CWQG-25H)
Expansion IFs: USB 2.0
USB ports: 2
WI1 chip1: Lantiq PSB 82312
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
WI2 chip1: Qualcomm Atheros QCA9880
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL
ETH chip1: Lantiq PXB 4389-720
ETH chip2: Lantiq PEF 7071
Switch: Lantiq PXB 4389-720
LAN speed: 1GbE
LAN ports: 4
WAN speed: 1GbE
WAN ports: 1
abgn+ac
Additional chips
VoIP Chip (2x FXS);Lantiq;PEF 42068; PEF 42068, V V1.2 (SLIC120), PEF42068VV12, SLL98;1;
Stock bootloader: U-Boot
Stock FW OS: Linux 2.6.32.42
802dot11 OUI: none specified
For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
AC1600 Wireless Gateway
# Chip Model Marked #1 CPU Lantiq PXB 4389-720 S8314L40 • SLLF6 #2 2.4G Lantiq PSB 82312M S8164K02 • SLLJ5 #3 5GHz Qualcomm QCA9880 QCA9880-BR4A #4 WAN Lantiq PEF 7071 S8043L71 • SLLHU #5 VoIP Lantiq PEF 42068 S828NN26 • SLL98 #6 RAM EtronTech EM68C16CWQG-25H #7 Flash Winbond W29N01HVSINA
• Boot log • >> |
---|
ROM VER: 1.0.0 CFG 06 NAND ROM VER: 1.0.0 CFG 06 NAND DDR autotuning Rev 1.0 DDR size from 0xa0000000 - 0xa3ffffff DDR check ok... start booting... Tilgin UBI HG228x/238x U-Boot 2010.06-LANTIQ-v-2.3.10 (Mar 09 2015 - 22:07:17) 02_07_00_42 CLOCK CPU 720M RAM 360M 16 Bit RAM DRAM: 128 MiB NAND: NAND device: Manufacturer ID: 0xc2, Chip ID: 0xf1 (Macronix NAND 128MiB 3,3V 8-bit) 128 MiB Creating 1 MTD partitions on "nand0": 0x000000000000-0x000000080000 : "U-Boot" Creating 1 MTD partitions on "nand0": 0x000000080000-0x000008000000 : "ubi" UBI: attaching mtd2 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: max. sequence number: 13131 UBI: attached mtd2 to ubi0 UBI: MTD device name: "ubi" UBI: MTD device size: 127 MiB UBI: number of good PEBs: 1018 UBI: number of bad PEBs: 2 UBI: number of corrupted PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 256 UBI: number of internal volumes: 1 UBI: number of user volumes: 13 UBI: available PEBs: 689 UBI: total number of reserved PEBs: 329 UBI: number of PEBs reserved for bad PEB handling: 10 UBI: max/mean erase counter: 268/13 UBI: image sequence number: 1377090127 Volume Environment (ID 4) found at slot 4 Read 7936 bytes from volume 4 to 86c332a8(buf address) In: serial Out: serial Err: serial Board reset caused by unknown (3c08a060). Net: internal phy using 25Mhz clock Internal phy firmware version: 0x8434 PHY version 8435 ar10 Switch Type "run flash_flash" to start the Linux kernel Hit any key to stop autoboot: 0 No private boot packet is detected Volume kernel (ID 7) found at slot 7 Read 0 bytes from volume 7 to 80500000(buf address) Read [1417059] bytes ## Booting kernel from Legacy Image at 80500000 ... Image Name: MIPS Linux-2.6.32 Created: 2016-12-01 21:23:11 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1416995 Bytes = 1.4 MiB Load Address: 80002000 Entry Point: 80006150 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... Lantiq xDSL CPE GRX390 mips_hpt_frequency = 360000000, counter_resolution = 2 Linux version 2.6.32.42 (lajo@tilgin00144) (gcc version 4.3.3 (GCC) ) #1 Thu Dec 1 22:23:02 CET 2016 printk buffer from the previous boot: ----------------------------------- phym = 08000000, mem = 07f00000, max_pfn = 00007f00 Reserving memory for CP1 @0xa7f00000, size 0x00100000 CPU revision is: 00019556 (MIPS 34Kc) Determined physical RAM map: AR10 mem final size = 3207168 AR10 mem final size = 5177344 AR10 mem final size = 107999232 User-defined physical RAM map: memory: 0030f000 @ 00000000 (usable) memory: 004f0000 @ 00410000 (usable) memory: 066ff000 @ 00a01000 (usable) Zone PFN ranges: Normal 0x00000000 -> 0x00007100 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000030f 0: 0x00000410 -> 0x00000900 0: 0x00000a01 -> 0x00007100 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 28188 Kernel command line: mtdparts=ifx_nand:0x80000@0x0(U-Boot),-@0x80000(ubi) ubi.mtd=ubi root=mtd:rootfs ip=192.168.1.1:192.168.1.3::::eth0:on console=ttyS0,115200 ethaddr=00:02:61:BA:50:80 ID_ProductID=HG2381 ID_MAC_0=00:02:61:BA:50:80 ID_MAC_1=00:02:61:BA:50:81 ID_MAC_2=00:02:61:BA:50:82 ID_MAC_3=00:02:61:BA:50:83 ID_MAC_4=00:02:61:BA:50:84 ID_MAC_5=00:02:61:BA:50:85 ID_MAC_6=00:02:61:BA:50:86 ID_MAC_7=00:02:61:BA:50:87 panic=1 UBOOT_VERSION="02_07_00_42" UBOOT_DATETIME="Mar 9 2015 - 22:07:37" RESET_CAUSE=unknown boot_cond=0 vpe1_load_addr=0x87f00000 vpe1_mem=1M wlanm=126 mem=0x40f000 mem=0x5f0000@0x410000 mem=0x67ff000@0xa01000 PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes Writing ErrCtl register=0005f4f0 Readback ErrCtl register=0005f4f0 Memory: 108696k/113656k available (3048k kernel code, 4784k reserved, 1119k data, 192k init, 0k highmem) Hierarchical RCU implementation. NR_IRQS:185 Lantiq ICU driver, version 3.0.1, (c) 2001-2013 Lantiq Deutschland GmbH console [ttyS0] enabled Calibrating delay loop... 478.41 BogoMIPS (lpj=2392064) Security Framework initialized Mount-cache hash table entries: 512 NET: Registered protocol family 16 | | ~|~~~ | | ,~~~~. | ,~~~~. | | | | | | | | `~~` ' ' `~~~ ; ' ' ' ~~~~ Home gateway product HG2381 Registered platform device tilgin-hg-ltq-nand:-1 Registered platform device tilgin-hg-ltq-gphy:-1 Registered platform device ar10-ssi0:-1 Registered platform device ar10-mdio:-1 Registered platform device danube-ledc-gpo:-1 Registered platform device on-off-sw-gpio:0 Registered platform device on-off-sw-gpio:2 Registered platform device on-off-sw-gpio:3 Registered platform device on-off-sw-gpio:4 Registered platform device leds-gpio:5 Registered platform device ar10-usif:-1 Registered platform device on-off-sw-gpio:1 Registered platform device cosic-catiq:-1 !!!!!!! WAVE400 system registeration on AHB MTLK_MEM_BAR0_START is 7e00000 MTLK_MEM_BAR0_END is 7efffff MTLK_MEM_BAR1_START is 1a000000 MTLK_MEM_BAR1_END is 1a7fffff MTLK_WIRELESS_IRQ_IN_INDEX is 18 Lantiq Danube/Twinpass/Vinax GPIO danube-gpio danube-gpio.0: gpio_base=0 danube-gpio danube-gpio.1: gpio_base=16 danube-gpio danube-gpio.2: gpio_base=32 Lantiq Danube/Twinpass/Vinax LED controller GPO danube-ledc-gpo danube-ledc-gpo: gpio_base=64 On/off switch class GPIO-based on/off switch with auto-off Registered on/off switch device: slic_reset Registered on/off switch device: usb_power Registered on/off switch device: pcie0_rst Registered on/off switch device: pcie2_rst Registered on/off switch device: cosic_reset ifx_pcie_wait_phy_link_up port 0 timeout ifx_pcie_wait_phy_link_up port 0 timeout ifx_pcie_wait_phy_link_up port 0 timeout ifx_pcie_wait_phy_link_up port 0 timeout ifx_pcie_wait_phy_link_up port 0 timeout pcie_rc_initialize port 0 link up failed!!!!! on/off switch 'pcie1_rst' not found Lantiq PCIe Root Complex driver, version 2.0.0, (c) 2001-2013 Lantiq Deutschland GmbH bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ifx_pcie_rc_class_early_fixup port 2: fixed pcie host bridge to pci-pci bridge pci 0000:00:00.0: PME# supported from D0 D3hot pci 0000:00:00.0: PME# disabled pci 0000:01:00.0: PME# supported from D0 D1 D3hot pci 0000:01:00.0: PME# disabled pci 0000:00:00.0: PCI bridge, secondary bus 0000:01 pci 0000:00:00.0: IO window: disabled pci 0000:00:00.0: MEM window: 0x1b000000-0x1b1fffff pci 0000:00:00.0: PREFETCH window: 0x1b200000-0x1b2fffff NET: Registered protocol family 8 NET: Registered protocol family 20 Switching to clocksource MIPS NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered NET: Registered protocol family 1 gptu: totally 6 16-bit timers/counters gptu: misc_register on minor 63 gptu: succeeded to request irq 118 gptu: succeeded to request irq 119 gptu: succeeded to request irq 120 gptu: succeeded to request irq 121 gptu: succeeded to request irq 122 gptu: succeeded to request irq 123 IFX DMA driver, version ifxmips_dma_core.c:v1.1.5 ,(c)2009 Infineon Technologies AG Lantiq CGU driver, version 1.1.38, (c) 2001-2013 Lantiq Deutschland GmbH vpe1_mem = 100000 Wired TLB entries for Linux read_c0_wired() = 0 squashfs: version 4.0 (2009/01/31) Phillip Lougher Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher msgmni has been set to 212 alg: No test for stdrng (krng) Infineon Technologies DEU driver version 2.0.0 Lantiq Technologies DEU Driver version 2.0.0 alg: cipher: setkey failed on test 5 for ifxdeu-des: flags=100 alg: skcipher: setkey failed on test 5 for ifxdeu-ecb(des): flags=100 alg: cipher: setkey failed on test 1 for ifxdeu-des3_ede: flags=200000 IFX DEU DES initialized (multiblock). Lantiq Technologies DEU Driver version 2.0.0 IFX DEU AES initialized (multiblock). Infineon Technologies DEU driver version 2.0.0 IFX DEU ARC4 initialized (multiblock). Infineon Technologies DEU driver version 2.0.0 IFX DEU SHA1 initialized. Infineon Technologies DEU driver version 2.0.0 IFX DEU MD5 initialized. Infineon Technologies DEU driver version 2.0.0 Key length exceeds maximum key length alg: hash: setkey failed on test 5 for ifxdeu-sha1_hmac: ret=22 IFX DEU SHA1_HMAC initialized. Infineon Technologies DEU driver version 2.0.0 alg: hash: setkey failed on test 5 for ifxdeu-md5_hmac: ret=22 IFX DEU MD5_HMAC initialized. DEU driver initialization complete! io scheduler noop registered (default) I/O Memory GPIO Emulation ifx_pmu_init: Major 253 Lantiq PMU driver, version 1.2.6, (c) 2001-2013 Lantiq Deutschland GmbH Lantiq GPIO driver, version 1.3.2, (c) 2001-2013 Lantiq Deutschland GmbH Infineon Technologies RCU driver version 1.1.1 tilgin-hg-ltq-gphy tilgin-hg-ltq-gphy: Lantiq GPHY kthread created tilgin-hg-ltq-gphy tilgin-hg-ltq-gphy: gpio_base=96 Tilgin initialization is OK ttyS0 at MMIO 0xbe100c00 (irq = 105) is a IFX_ASC Lantiq ASC (UART) driver, version 1.0.14, (c) 2001-2013 Lantiq Deutschland GmbH loop: module loaded slram: not enough parameters. Tilgin HG Lantiq NAND driver ifx_nand_init Probe for NAND flash... Checking if ONFI complient NAND device: Manufacturer ID: 0xc2, Chip ID: 0xf1 (Macronix NAND 128MiB 3,3V 8-bit) Scanning device for bad blocks Bad eraseblock 44 at 0x000000580000 Bad eraseblock 1020 at 0x000007f80000 2 cmdlinepart partitions found on MTD device ifx_nand Creating 2 MTD partitions on "ifx_nand": 0x000000000000-0x000000080000 : "U-Boot" 0x000000080000-0x000008000000 : "ubi" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: max. sequence number: 13131 UBI: attached mtd1 to ubi0 UBI: MTD device name: "ubi" UBI: MTD device size: 127 MiB UBI: number of good PEBs: 1018 UBI: number of bad PEBs: 2 UBI: number of corrupted PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 256 UBI: number of internal volumes: 1 UBI: number of user volumes: 13 UBI: available PEBs: 689 UBI: total number of reserved PEBs: 329 UBI: number of PEBs reserved for bad PEB handling: 10 UBI: max/mean erase counter: 268/13 UBI: image sequence number: 1377090127 UBI: background thread "ubi_bgt0d" started, PID 242 Lantiq SSC driver, version 2.4.2, (c) 2001-2013 Lantiq Deutschland GmbH Lantiq USIF-SPI driver, version 1.3.2, (c) 2001-2013 Lantiq Deutschland GmbH PPP generic driver version 2.4.2 NET: Registered protocol family 24 PPPoL2TP kernel driver, V1.0 Lantiq PCIe EP driver, version 1.0.1, (c) 2001-2013 Lantiq Deutschland GmbH IFX SWITCH API, Version 1.2.6 SWAPI: Registered character device [switch_api] with major no [81] Switch API: PCE MicroCode loaded !! GPHY FW load for ARX300 !! Lantiq GPHY #0 in GE mode Lantiq GPHY #1 in GE mode Lantiq GPHY #2 in GE mode Lantiq GPHY #3 in GE mode IFX GPHY driver version ifxmips_xrx_gphy: V1.1.1 - Firmware: GPHY0 GE 8435, GPHY1 GE 8435, GPHY2 GE 8435, GPHY3 GE 8435 res = 86d2e400 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. input: input-gpio-polled as /devices/platform/input-gpio-polled.0/input/input0 Lantiq Danube/Twinpass/Vinax Watchdog danube-wdt danube-wdt: Starting Watchdog Timer Start watchdog with maximum timeout 44 seconds Registered led device: 1:green Registered led device: 3:green Registered led device: 3:red Registered led device: 4:green Registered led device: 4:red Registered led device: 5:green Registered led device: 5:red Registered led device: 6:red Registered led device: 6:green Registered led device: 7:red Registered led device: 7:green Registered led device: 8:red Registered led device: 8:green Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (1701 buckets, 6804 max) ctnetlink v0.93: registering with nfnetlink. nf_ct_ipsec_ike: registering helper for pf: 2 port: 500 xt_time: kernel timezone is -0000 ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 Bridge firewalling registered Ebtables v2.0 registered KOAM is loaded successfully. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> tilgin-hg-ltq-gphy tilgin-hg-ltq-gphy: switch port #1 PHY ID is 0x1 tilgin-hg-ltq-gphy tilgin-hg-ltq-gphy: switch port #2 PHY ID is 0x2 tilgin-hg-ltq-gphy tilgin-hg-ltq-gphy: switch port #3 PHY ID is 0x3 tilgin-hg-ltq-gphy tilgin-hg-ltq-gphy: switch port #4 PHY ID is 0x4 tilgin-hg-ltq-gphy tilgin-hg-ltq-gphy: switch port #5 PHY ID is 0x5 Firmware version for port 1 is 435 - may be it's timeto enable power saving? Firmware version for port 2 is 435 - may be it's timeto enable power saving? Firmware version for port 3 is 435 - may be it's timeto enable power saving? Firmware version for port 4 is 435 - may be it's timeto enable power saving? Firmware version for port 5 is 435 - may be it's timeto enable power saving? Use /dev/mtdblock2 instead of mtd:rootfs VFS: Mounted root (squashfs_old filesystem) readonly on device 31:2. Freeing unused kernel memory: 192k freed init started: BusyBox v1.21.1 (2016-12-01 22:27:29 CET) starting pid 311, tty '': '/etc/init.d/rcS' real 0m 0.02s user 0m 0.00s sys 0m 0.02s crm-cleanup: running... iptables v1.4.6: can't initialize iptables table `mangle': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. iptables v1.4.6: can't initialize iptables table `mangle': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. grep: /proc/597/cmdline: No such file or directory grep: /proc/613/cmdline: No such file or directory All modules unloaded crm-cleanup: done pmem-name2path: Failed to map MTD device 'Environment2' pmem-read.squashfs: Restoring /var/log from Log (/dev/mtd/4) mount: mounting /dev/mtdblock/4 on /tmp/pmem.Vp3p1I failed: Invalid argument mount: mounting /dev/mtdblock/8 on /tmp/pmem.9WEFal failed: Invalid argument cat: can't open '/tmp/pmem.9WEFal/VERSION': No such file or directory pmem-read.squashfs: Failed to read Config-A version file pmem-name2path: Failed to map MTD device 'Config-B' pmem-read.squashfs: Restoring /var/etc from Config-A (/dev/mtd/8) mount: mounting /dev/mtdblock/8 on /tmp/pmem.9WEFal failed: Invalid argument pmem-read.squashfs: Restoring /tmp/pmem.uYBBhB from Config-C (/dev/mtd/3) mount: mounting /dev/mtdblock/3 on /tmp/pmem.9WEFal failed: Invalid argument pmem-name2path: Failed to map MTD device 'Environment2' pmem-name2path: Failed to map MTD device 'rootfs-ram' pmem-name2path: Failed to map MTD device 'appfs-ram' pmem-read.squashfs: Restoring /var/miscA from Misc-A (/dev/mtd/14) mount: mounting /dev/mtdblock/14 on /tmp/pmem.NG6QwY failed: Invalid argument pmem-name2path: Failed to map MTD device 'Misc-B' pmem-name2path: Failed to map MTD device 'Config-B' Jan 1 00:00:16 C Dispatcher: Init module logger OK m.slot April 5, 2019, 5:36pm #2 (Part2/2) RootFS version ESx003-02_07_05_14 BusyBox v1.21.1 (2016-12-01 22:27:29 CET) built-in shell (ash) Enter 'help' for a list of built-in commands. Retrieved safe mode threat limit 5 # Trying to start watchdog with timeout 10 seconds umount: can't umount /usr/share/webui: Invalid argument IFXUSB: ifxusb_hcd: version 3.2 B140220-tilgin271015 IFXUSB: OPTION: __IS_AR10__ IFXUSB: OPTION: __UEIP__ IFXUSB: OPTION: __PHY_LONG_PREEMP__ IFXUSB: OPTION: __UNALIGNED_BUF_ADJ__ IFXUSB: OPTION: __ENABLE_DUMP__ IFXUSB: OPTION: __NEW_COC__ IFXUSB: OPTION: __IS_HOST__ IFXUSB: __IS_DUAL__ IFXUSB: __DYN_SOF_INTR__ IFXUSB: __UEIP__ IFXUSB: __DO_OC_INT__ IFXUSB: __INTRNAKRETRY__ IFXUSB: __INTRINCRETRY__ IFXUSB: USB core #0 soft-reset IFXUSB: USB core #0 soft-reset ifxusb_hcd ifxusb_hcd: IFX USB Controller ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 1 ifxusb_hcd ifxusb_hcd: irq 54, io mem 0xbe101000 IFXUSB: Init: Power Port (0) on/off switch 'usb1_power' not found usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected IFXUSB: USB core #1 soft-reset IFXUSB: USB core #1 soft-reset ifxusb_hcd ifxusb_hcd: IFX USB Controller ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 2 ifxusb_hcd ifxusb_hcd: irq 83, io mem 0xbe106000 IFXUSB: Init: Power Port (0) on/off switch 'usb2_power' not found usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected cryptodev: module license 'BSD' taints kernel. Disabling lock debugging due to kernel taint usbcore: registered new interface driver cdc_acm cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver usbserial usbserial: USB Serial Driver core USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver option option: v0.7.2:USB Driver for GSM modems usbcore: registered new interface driver usblp usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver rndis_host usbcore: registered new interface driver cdc_ncm [4294692186] mtlk0(mtlk_cdev_init:355): Max nodex set to 1048575 [4294693296] mtlk0(__mtlk_print_endianess:4915): The system is Big endian (0xbeadfeed, 0xedfeadbe) [4294693296] mtlk<3>(_ahb_irq_get:429): Found device IRQ: 18 [4294693306] mtlk0(_mtlk_df_user_alloc_devname:8455): NDEV Name pattern: wlan%d [4294693316] mtlk0(mtlk_core_pdb_fast_handles_open:44): Open Hot-path parameters [4294693316] mtlk<4>(_mtlk_mmb_cleanup_reset_mac:3245): FW CPU reset is done [MTLKD] BBCPU Reg: offs=0x01c0 (ba2f01c0) val=0xfff007e0 (offset_mb=126) [MTLKD] Enabling interrupt (bf880208) [MTLKD] Interrupt enabled [MTLKD] ChipID: 0x07D0 [MTLKD] e-fuse: num 1, address 0xbf1073b0, word: 0x00000000, value: 0x000 [MTLKD] e-fuse: num 2, address 0xbf1073b4, word: 0x00000000, value: 0x000 [MTLKD] e-fuse: num 3, address 0xbf1073b8, word: 0x00000000, value: 0x000 [MTLKD] e-fuse: num 4, address 0xbf1073bc, word: 0x00000000, value: 0x000 [MTLKD] e-fuse: num 5, address 0xbf1073c0, word: 0x00000000, value: 0x000 [MTLKD] e-fuse: num 6, address 0xbf1073c4, word: 0x00000000, value: 0x000 mtlk mtlk.0: firmware: requesting cal_wlan0.bin [4294693506] mtlk0(mtlk_mmb_drv_get_cpu_freq:604): FPI bus frequency: 360 MHz mtlk mtlk.0: firmware: requesting ap_upper_ar10.bin [4294693736] mtlk0(get_firmware_version:1161): CID-0000: ap_upper_ar10.bin: @@@ VERSION INFO @@@ version number: 3.4.2.40.05_NoPsTxCancel_2_r4540 MIPS: Single CPU(TMC AGG AP) interface: PCI phy type: real phy on Dec 31 2014 at 14:19:47@@@ END @@@ [4294693816] mtlk<4>(_mtlk_mmb_send_hw_dep_cfg:2443): AFE value: 0x23056012 [4294693846] mtlk0(mtlk_eeprom_check_ee_data:1353): Options mask is 0x00 [4294693846] mtlk0(load_default_hw_table:2119): HW configuration is 2X2 [4294694046] mtlk0(_mtlk_core_mbss_add_vap:7757): CID-0000: Got PRM_ID_VAP_ADD [4294694056] mtlk0(_mtlk_df_user_alloc_devname:8455): NDEV Name pattern: wlan0.0 [4294694066] mtlk0(mtlk_core_pdb_fast_handles_open:44): Open Hot-path parameters [4294694086] mtlk0(_mtlk_core_mbss_add_vap:7775): CID-0000: VAP#1 added [4294694126] mtlk0(_mtlk_core_mbss_add_vap:7757): CID-0000: Got PRM_ID_VAP_ADD [4294694126] mtlk0(_mtlk_df_user_alloc_devname:8455): NDEV Name pattern: wlan0.1 [4294694136] mtlk0(mtlk_core_pdb_fast_handles_open:44): Open Hot-path parameters [4294694176] mtlk0(_mtlk_core_mbss_add_vap:7775): CID-0000: VAP#2 added [4294694226] mtlk0(_mtlk_core_mbss_add_vap:7757): CID-0000: Got PRM_ID_VAP_ADD [4294694226] mtlk0(_mtlk_df_user_alloc_devname:8455): NDEV Name pattern: wlan0.2 [4294694236] mtlk0(mtlk_core_pdb_fast_handles_open:44): Open Hot-path parameters [4294694286] mtlk0(_mtlk_core_mbss_add_vap:7775): CID-0000: VAP#3 added Loading D5 (MII0/1) driver ...... CHIPID: 1, chipid address: 0xbf107344 Succeeded! PPE datapath driver info: Version ID: 128.3.3.1.2.14.1 Family : AR10 DR Type : Normal Data Path | Indirect-Fast Path Interface : MII0 | MII1 Mode : Routing Release : 2.14.1 PPE firmware info: Version ID: 10.5.2.14.3 Family : GRX390 FW Package: D5 Release : 2.14.3 PPE firmware feature: Packet Acceleration Support IPv4 Support IPv6 Support 6RD Support DS-Lite Support PPA API --- init successfully ifx_ppa_init - init succeeded ifx_ppa_init - init succeeded IFXOS, Version 1.5.16 (c) Copyright 2009, Lantiq Deutschland GmbH ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, WRITE_EEPROM, TX_DATA_SWAP, RX_DATA_SWAP, 11D) ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved ath_dfs: Version 2.0.0 Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved ath_pci: 10.2.85 (Atheros/multi-bss) ath_pci_probe PCI device id is 003c :003c PCI: Enabling device 0000:01:00.0 (0000 -> 0002) ath_pci 0000:01:00.0: ath DEBUG: sc=0x855d7200 ol_ath_pci_configure : num_desired MSI set to 0 Using PCI Legacy Interrupt __ol_ath_attach: ath_attach TODO __ol_ath_attach: dev name wifi0 ol_ath_attach() BMI inited. ol_ath_attach() BMI Get Target Info. ol_ath_attach() TARGET TYPE: 7 Vers 0x4100016c NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 ol_ath_attach() configure Target . Reading Flash for Calibraton data from 0x5000 and partition name is caldata TILGIN ol_transfer_bin_file OS_NAND_FLASH_READ at 20480 (2116) OK qc98xx_verify_checksum: flash checksum passed: 0xe0f3 ol_transfer_bin_file 1804: Download Flash data len 2116 ol_transfer_bin_file 1748: Download Firmware data len 218164 ol_ath_attach() Download FW. ol_ath_attach() HT Create . ol_ath_attach() HIF Claim. ol_ath_attach() BMI Done. ol_ath_attach() WMI attached. wmi_handle 85750000 +HWT CE_recv_buf_enqueue 625 Populate last entry 512 for CE 5 CE_recv_buf_enqueue 634 CE 5 wi 511 dest_ptr 0x46d8840 nbytes 0 recv_ctxt 0x846d68c0 -HWT HTC Service:0x0300 ep:1 TX flow control disabled CE_pkt_dl_len_set CE 4 Pkt download length 64 HTC Service:0x0100 ep:2 TX flow control disabled wmi_service_ready_event_rx: WMI UNIFIED SERVICE READY event num_rf_chain : 00000003 ht_cap_info: : 0000085b vht_cap_info : 338001b2 vht_supp_mcs : 0000ffea LARGE_AP enabled. num_peers 144, num_vdevs 16, num_tids 256 idx 0 req 1 num_units 0 num_unit_info 2 unit size 408 actual units 145 chunk 0 len 59160 requested ,ptr 0x56e0000 FIRMWARE:P 145 V 16 T 443 FIRMWARE:_wlan_rtt_enable wmi_ready_event_rx: WMI UNIFIED READY event ol_ath_connect_htc() WMI is ready ol_ath_set_host_app_area TODO target uses HTT version 2.1; host uses 2.1 ol_ath_attach() connect HTC. ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0. ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150 ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0 ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0 ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0 ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150 ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080 ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080 ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080 Add VHT80 channel: 5210 Add VHT80 channel: 5290 Add VHT80 channel: 5530 Add VHT80 channel: 5610 Add VHT80 channel: 5690 Add VHT80 channel: 5775 Skipping VHT80 channel 5825 ol_ath_phyerr_attach: called OL Resmgr Init-ed ol_if_dfs_setup: called ol_if_dfs_attach: called; ptr=84701974, radar_info=855cdc08 ol_ath_rtt_meas_report_attach: called ol_ath_attach() UMAC attach . ol_if_dfs_configure: called ol_if_dfs_configure: FCC domain ol_if_dfs_disable: called ol_ath_attach: Calling ol_if_dfs_configure __ol_ath_attach: init tx/rx TODO __ol_ath_attach: hard_header_len reservation 58 Initializing Pktlogs for 11ac ath_ioctl: SIOC80211IFCREATE CALLED wmi_unified_vdev_create_send: ID = 0 VAP Addr = 00:02:61:ba:50:85: Getting Nss: 3 ieee80211_dfs_override_cac_timeout: CAC timeout is now overridden (2) watchdog: disabled Trying to start watchdog with timeout 10 seconds ifx_ppa_init - init succeeded [4294707376] mtlk0(_mtlk_df_user_ppa_register:616): PPA device function is registered (id=3) device eth0 entered promiscuous mode device wlan0 entered promiscuous mode isCountryCodeValid: EEPROM regdomain 0x0 ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150 ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0 ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0 ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0 ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150 ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080 ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080 ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080 Add VHT80 channel: 5210 Add VHT80 channel: 5290 Add VHT80 channel: 5530 Add VHT80 channel: 5610 Skipping VHT80 channel 5660 Skipping VHT80 channel 5680 Skipping VHT80 channel 5700 OL vap_stop + wmi_unified_vdev_stop_send OL vap_stop - STOPPED EVENT for vap 0 OL vap_stop + wmi_unified_vdev_stop_send OL vap_stop - STOPPED EVENT for vap 0 Too long sleep: 5 vs 2 ath_ioctl: SIOC80211IFCREATE CALLED wmi_unified_vdev_create_send: ID = 0 VAP Addr = 00:02:61:ba:50:85: Mem: 47220K used, 61844K free, 0K shrd, 5656K buff, 19784K cached CPU: 45% usr 54% sys 0% nic 0% idle 0% io 0% irq 0% sirq Load average: 1.52 0.35 0.11 5/51 2086 PID PPID USER STAT VSZ %VSZ %CPU COMMAND 684 531 root R 12416 11% 36% crm -t -f /var/log/crm.log 2072 2071 root R < 1856 2% 9% top -b -n 1 1803 684 root S 8032 7% 0% drvhlpr -p /tmp/drvhlpr0.conf -e 2 2032 684 root S < 3600 3% 0% watchdog --crm-timeout 180 --wdt-timeout 10 1391 1386 root S 1864 2% 0% {crm-hotplug} /bin/sh /usr/bin/crm-hotplug usb 1436 1431 root S 1864 2% 0% {crm-hotplug} /bin/sh /usr/bin/crm-hotplug usb 1286 684 root S 1860 2% 0% /bin/sh --login 1 OL vap_stop + wmi_unified_vdev_stop_send OL vap_stop - STOPPED EVENT for vap 0 0 root S 1856 2% 0% init 531 1 root S 1856 2% 0% {crm-keeper} /bin/sh /usr/bin/crm-keeper 1226 OL vap_stop + wmi_unified_vdev_stop_send OL vap_stop - STOPPED EVENT for vap 0 1 root S 1856 2% 0% syslogd -O /var/log/crm.log -s 200 1386 6 root S 1856 2% 0% {crm-hotplug} /bin/sh /usr/bin/crm-hotplug usb 2071 2032 root S < 1856 2% 0% /bin/sh -c top -b -n 1 1431 6 root S 1856 2% 0% {crm-hotplug} /bin/sh /usr/bin/crm-hotplug usb 2081 6 root S 1856 2% 0% {crm-hotplug} /bin/sh /usr/bin/crm-hotplug net 1224 1 root S 1848 2% 0% klogd 1404 1391 root S 1552 1% 0% caction -u hotplug.usb /usb/host/updPPA REG DONE, if_id=4, dev_if_index = 12, os_unit=0 ate_led 1449 1436 root S 1552 1% 0% caction -u hotplug.usb /usb/host/update_led 1437 1431 root S 1548 1% 0% clog -l ERROR 1392 1386 root S 1548 1% 0% clog -l ERROR 2042 684 nobody S 1444 1% 0% dnsmasq -i * -a 0.0.0.0 --keep-in-foreground -u nobody --cache=2048 -H /etc/dnrd/master --stop-dns-rebind --rebind-localhost-ok --conf-file=/tmp/dnsmasq.1_domains.conf --bind-loopback 2086 2081 root R 8 0% 0% [which] 217 2 root SW 0 0% 0% [mtdblockd] 5 2 root SW 0 0% 0% [events/0] 1device wlan2 entered promiscuous mode 790 2 root DW 0 0% 0% [mtlk] 6 2 root SW 0 0% 0% [khelper] 242 2 root SW 0 0% 0% [ubi_bgt0d] 118 2 root SW 0 0% 0% [kblockd/0] 157 2 root SW 0 0% 0% [aio/0] 158 2 root SW 0 0% 0% [crypto/0] 156 2 root SW 0 0% 0% [kswapd0] 1425 2 root SW 0 0% 0% [ifxhcd_workqueu] 165 2 root SW 0 0% 0% [crypto] 166 2 root SW 0 0% 0% [crypto_ret] 1385 2 root SW 0 0% 0% [ifxhcd_killurbd] 116 2 root SW 0 0% 0% [bdi-default] 1285 2 root SW 0 0% 0% [ipolldevd] 127 2 root SW 0 0% 0% [khubd] 114 2 root SW 0 0% 0% [sync_supers] 1812 2 root DW 0 0% 0% [mtlk] 1823 2 root DW 0 0% 0% [mtlk] 1834 2 root RW 0 0% 0% [mtlk] 1384 2 root SW 0 0% 0% [ifxhcd_workqueu] 3 2 root SW 0 0% 0% [ksoftirqd/0] 4 2 root SW 0 0% 0% [watchdog/0] 1430 2 root SW 0 0% 0% [ifxhcd_killurbd] 2 0 root SW 0 0% 0% [kthreadd] 9 2 root SW 0 0% 0% [async/mgr] Configuration fil ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1 OL vap_stop + wmi_unified_vdev_stop_send OL vap_stop - STOPPED EVENT for vap 0 e: /tmp/hostapd-wlan2.conf DEVICE IS DOWN ifname=wlan2 DEVICE IS DOWN ifname=wlan2 Using interface wlan2 with hwaddr 00:02:61:ba:50:85 and ssid "Tilgin-ZgAzu9nyYsAF_5GHz" DES SSID SET=Tilgin-ZgAzu9nyYsAF_5GHz WPS: ConvOL vap_stop + wmi_unified_vdev_stop_send OL vap_stop - STOPPED EVENT for vap 0 erting push_button to virtual_push_button for WPS 2.0 compliance FWLOG: [44300] WAL_DBGID_SECURITY_ENCR_EN ( ) FWLOG: [44300] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 ) OL vap_start + OL vap_start - ol_vdev_start_resp_ev ol_ath_vap_join: join operation is only for STA/IBSS mode ol_ath_wmm_update: Notification to UMAC VAP layer FWLOG: [44440] WHAL_ERROR_RESET_CHANNF1 ( ) Tunnel link is UP wmi_unified_vdev_stop_send STOPPED EVENT for vap 0 OL vap_start + OL vap_start - ol_vdev_start_resp_ev ol_ath_vap_join: join operation is only for STA/IBSS mode Notification to UMAC VAP layer wmi_unified_vdev_stop_send STOPPED EVENT for vap 0 FWLOG: [46128] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 ) OL vap_stop + wmi_unified_vdev_stop_send OL vap_stop - STOPPED EVENT for vap 0 Configuration file: /tmp/hostapd-wlan2.conf OL vap_start + OL vap_start - ol_vdev_start_resp_ev ol_ath_vap_join: join operation is only for STA/IBSS mode ol_ath_wmm_update: Notification to UMAC VAP layer ieee80211_ioctl_siwmode: imr.ifm_active=643, new mode=3, valid=1 wmi_unified_vdev_stop_send STOPPED EVENT for vap 0 DEVICE IS DOWN ifname=wlan2 DEVICE IS DOWN ifname=wlan2 Using interface wlan2 with hwaddr 00:02:61:ba:50:85 and ssid "Tilgin-ZgAzu9nyYsAF_5GHz" CRM state '/voip/call/table' flags=0 saving... CRM state '/voip/call/table' flags=0 saving... done. Status=EOK Count=0 CRM state '/' flags=0 saving... WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance OL vap_stop + wmi_unified_vdev_stop_send OL vap_stop - STOPPED EVENT for vap 0 OL vap_start + OL vap_start - ol_vdev_start_resp_ev ol_ath_vap_join: join operation is only for STA/IBSS mode ol_ath_wmm_update: Notification to UMAC VAP layer CRM state '/' flags=0 saving... done. Status=EOK Count=1185 find: /sys/class/scsi_disk/*/uevent: No such file or directory FWLOG: [47481] WAL_DBGID_SECURITY_ENCR_EN ( ) FWLOG: [47481] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 ) find: /sys/class/tty/tty????/uevent: No such file or directory find: /sys/class/tty/wwan?/uevent: No such file or directory find: /sys/class/usb/lp*/device/uevent: No such file or directory 1970-01-01 00:00:51: (/space/sources/02_07/factory/src/vood/ng/02_07/lighttpd/src/log.c.164) server started wmi_unified_vdev_stop_send STOPPED EVENT for vap 0 OL vap_stop + wmi_unified_vdev_stop_send OL vap_stop - STOPPED EVENT for vap 0 Tx power value is greater than supported max tx power 63, Limiting to default Max Getting VHT MCS MAP set: 0 Configuration file: /tmp/hostapd-wlan0.conf Using interface wlan0 with hwaddr 00:02:61:ba:50:82 and ssid "Tilgin-ZgAzu9nyYsAF" udhcpd (v1.21.1) started WPS: Converting push_button to virtual_push_button fo[4294721036] mtlk0(_mtlk_core_mbss_is_rescan_exempted:2758): Re-Scan cannot be exempted (20/40 is active) [4294721046] mtlk0(mtlk_mbss_init:3439): CID-0000: _mtlk_core_mbss_check_activation_params returned successfully [4294721056] mtlk0(_mtlk_mbss_preactivate:2917): CID-0000: Pre-activation configured parameters: [4294721066] mtlk0(mtlk_core_configuration_dump:4938): CID-0000: Country : SE [4294721076] mtlk0(mtlk_core_configuration_dump:4939): CID-0000: Domain : 48 [4294721086] mtlk0(mtlk_core_configuration_dump:4940): CID-0000: Network mode : 802.11bgn [4294721086] mtlk0(mtlk_core_configuration_dump:4941): CID-0000: Band : 2.4 [4294721096] mtlk0(mtlk_core_configuration_dump:4942): CID-0000: Prog Model Spectrum : 40 MHz [4294721106] mtlk0(mtlk_core_configuration_dump:4943): CID-0000: Selected Spectrum : 40 MHz [4294721116] mtlk0(mtlk_core_configuration_dump:4944): CID-0000: User Sel. Spectrum : 40 MHz [4294721126] mtlk0(mtlk_core_configuration_dump:4945): CID-0000: Bonding : lower [4294721126] mtlk0(mtlk_core_configuration_dump:4946): CID-0000: HT mode : enabled [4294721136] mtlk0(mtlk_core_configuration_dump:4948): CID-0000: SM enabled : enabled [4294721146] mtlk0(mtlk_aocs_set_config_frequency_band:3162): Overriding AOCS type for 2.4 GHz (NONE) [4294721156] mtlk0(_mtlk_mbss_preactivate:2932): CID-0000: Start AOCS [4294721166] mtlk0(_mtlk_mbss_preactivate:2945): CID-0000: ap_scan_band_cfg = 1 [4294721166] mtlk0(_mtlk_core_perform_initial_scan:2701): CID-0000: Scan started 40MHz [4294721176] mtlk0(do_scan:596): Starting normal scan... mtlk mtlk.0: firmware: requesting ProgModel_BG_CB_ar10.bin r WPS 2.0 compliance mtlk mtlk.0: firmware: requesting ProgModel_BG_CB_40_RevI_ar10.bin [4294721666] mtlk0(prepare_progmodel_string:2061): CID-0000: ProgModel: ProgModel_BG_CB_40_RevI_ar10.bin version 2025 [4294723606] mtlk0(_mtlk_core_perform_initial_scan:2701): CID-0000: Scan started 20MHz [4294723606] mtlk0(do_scan:596): Starting normal scan... mtlk mtlk.0: firmware: requesting ProgModel_BG_nCB_ar10.bin mtlk mtlk.0: firmware: requesting ProgModel_BG_nCB_40_RevI_ar10.bin [4294723816] mtlk0(prepare_progmodel_string:2061): CID-0000: ProgModel: ProgModel_BG_nCB_40_RevI_ar10.bin version 2025 OL vap_start + OL vap_start - ol_vdev_start_resp_ev ol_ath_vap_join: join operation is only for STA/IBSS mode ol_ath_wmm_update: ol_if_dfs_configure: called ol_if_dfs_configure: ETSI domain ol_if_dfs_disable: called ol_if_dfs_enable: called cac_start chan 5500 timeout 2 sec, curr time: 4294726 sec Notification to UMAC VAP layer [4294726736] mtlk<3>(_aocs_is_non_wifi_noise:3612): Force to 20 MHz mode due to interferer detection: RSSI:-43 thrsh:-60 [4294726736] mtlk<4>(aocs_detect_non_wifi_noise:3638): Coexistance switching to 20MHz Mode [4294726746] mtlk0(_mtlk_core_aocs_on_spectrum_change:2879): CID-0000: Spectrum changed to 20MHz [4294726756] mtlk0(_mtlk_mbss_preactivate:3040): CID-0000: Pre-activation selected parameters: [4294726766] mtlk0(mtlk_core_configuration_dump:4938): CID-0000: Country : SE [4294726776] mtlk0(mtlk_core_configuration_dump:4939): CID-0000: Domain : 48 [4294726786] mtlk0(mtlk_core_configuration_dump:4940): CID-0000: Network mode : 802.11bgn [4294726786] mtlk0(mtlk_core_configuration_dump:4941): CID-0000: Band : 2.4 [4294726796] mtlk0(mtlk_core_configuration_dump:4942): CID-0000: Prog Model Spectrum : 20 MHz [4294726806] mtlk0(mtlk_core_configuration_dump:4943): CID-0000: Selected Spectrum : 20 MHz [4294726816] mtlk0(mtlk_core_configuration_dump:4944): CID-0000: User Sel. Spectrum : 40 MHz [4294726826] mtlk0(mtlk_core_configuration_dump:4945): CID-0000: Bonding : lower [4294726826] mtlk0(mtlk_core_configuration_dump:4946): CID-0000: HT mode : enabled [4294726836] mtlk0(mtlk_core_configuration_dump:4948): CID-0000: SM enabled : enabled [4294726846] mtlk0(_mtlk_channels_frequency_element_dump:3086): CID-0000: Channel : 1 [4294726856] mtlk0(_mtlk_channels_frequency_element_dump:3087): CID-0000: ChannelACT : 0 [4294726866] mtlk0(_mtlk_channels_frequency_element_dump:3088): CID-0000: ScanType : 0 [4294726876] mtlk0(_mtlk_channels_frequency_element_dump:3089): CID-0000: ChannelSwCnt : 0 [4294726886] mtlk0(_mtlk_channels_frequency_element_dump:3090): CID-0000: SwitchMode : 0 [4294726886] mtlk0(_mtlk_channels_frequency_element_dump:3091): CID-0000: SmRequired : 0 [4294726896] mtlk0(_mtlk_channels_frequency_element_dump:3092): CID-0000: CbTxPowerLim : 116 [4294726906] mtlk0(_mtlk_channels_frequency_element_dump:3093): CID-0000: nCbTxPowerLim : 116 [4294726916] mtlk0(_mtlk_channels_frequency_element_dump:3094): CID-0000: AntennaGain : 0 [4294726926] mtlk0(_mtlk_channels_frequency_element_dump:3095): CID-0000: ChannelLoad : 0 [4294726936] mtlk0(_mtlk_channels_frequency_element_dump:3097): CID-0000: MaxTxPwr[0] : 0 [4294726936] mtlk0(_mtlk_channels_frequency_element_dump:3098): CID-0000: MaxTxPwrIdx[0] : 0 [4294726946] mtlk0(_mtlk_channels_frequency_element_dump:3097): CID-0000: MaxTxPwr[1] : 0 [4294726956] mtlk0(_mtlk_channels_frequency_element_dump:3098): CID-0000: MaxTxPwrIdx[1] : 0 [4294726966] mtlk0(_mtlk_channels_frequency_element_dump:3097): CID-0000: MaxTxPwr[2] : 0 [4294726976] mtlk0(_mtlk_channels_frequency_element_dump:3098): CID-0000: MaxTxPwrIdx[2] : 0 [4294726976] mtlk0(_mtlk_channels_frequency_element_dump:3100): CID-0000: SwitchType : 0 [4294726986] mtlk0(_mtlk_mbss_send_preactivate_req:2829): CID-0000: Sending UMI FW Preactivation [4294727066] mtlk<3>(mtlk_core_set_force_ncb:6653): CID-0000: Error returned for UMI_FORCE_NCB request to MAC (err=2) [4294727076] mtlk0(_mtlk_mbss_preactivate:3070): CID-0000: _mtlk_mbss_preactivate returned successfully [4294727086] mtlk0(mtlk_mbss_init:3446): CID-0000: _mtlk_mbss_preactivate_if_needed returned successfully [4294727086] mtlk0(mtlk_mbss_send_vap_activate:3134): CID-0000: Entering mtlk_mbss_send_vap_activate [4294727096] mtlk0(mtlk_mbss_send_vap_activate:3141): CID-0000: Start activation [4294727106] mtlk0(__mtlk_dump:66): dump of UMI_ACTIVATE_VAP: cp= 0x86220700 l=152 0000: 00 02 61 ba 50 82 00 00 02 00 00 05 00 0f 00 00 0010: aa 0f 00 00 55 00 00 00 ff ff ff ff 13 00 00 00 0020: 54 69 6c 67 69 6e 2d 5a 67 41 7a 75 39 6e 79 59 0030: 73 41 46 00 00 00 00 00 00 00 00 00 00 00 00 00 0040: 00 00 00 00 30 18 01 00 00 0f ac 02 02 00 00 0f 0050: ac 04 00 0f ac 02 01 00 00 0f ac 02 00 00 00 00 0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0090: 00 00 00 00 09 00 00 00 [4294727166] mtlk0(mtlk_mbss_send_vap_activate:3203): CID-0000: UMI_ACTIVATE_VAP [4294727166] mtlk0(mtlk_mbss_send_vap_activate:3204): CID-0000: sBSSID = 00:02:61:BA:50:82 [4294727176] mtlk0(mtlk_mbss_send_vap_activate:3205): CID-0000: sSSID = Tilgin-ZgAzu9nyYsAF [4294727186] mtlk0(mtlk_mbss_send_vap_activate:3206): CID-0000: Hidden = 0 [4294727196] mtlk0(__mtlk_dump:66): sRSNie = cp= 0x86220744 l=80 0000: 30 18 01 00 00 0f ac 02 02 00 00 0f ac 04 00 0f 0010: ac 02 01 00 00 0f ac 02 00 00 00 00 00 00 00 00 0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [4294727226] mtlk0(mtlk_mbss_send_vap_activate:3210): CID-0000: mtlk_txmm_msg_send, MsgId = 0x453, ESSID = Tilgin-ZgAzu9nyYsAF [4294727246] mtlk0(mtlk_mbss_init:3453): CID-0000: mtlk_mbss_send_vap_activate returned successfully wmi_unified_vdev_stop_send STOPPED EVENT for vap 0 OL vap_start + OL vap_start - ol_vdev_start_resp_ev ol_ath_vap_join: join operation is only for STA/IBSS mode ol_if_dfs_configure: called ol_if_dfs_configure: ETSI domain ol_if_dfs_disable: called ol_if_dfs_enable: called cac_start chan 5500 timeout 2 sec, curr time: 4294727 sec Notification to UMAC VAP layer cac_timeout cac expired, chan 5500 curr time 4294729 TAPI, Version 4.10.4.2, (c) 2001-2013 Lantiq Deutschland GmbH Lantiq MIPS34KEc MPS driver, version 2.2.7.0, (c) 2006-2010 Lantiq Deutschland GmbH Lantiq VMMC device driver, version 1.15.0.4, (c) 2006-2013 Lantiq Deutschland GmbH bkos: hal received command 2 CRM is considered alive and well - removing threat limit |
Images