UDOO Dual
UDOO Dual (MX6DL)
Manuf (OEM/ODM): SECO
FCC approval date: 09 November 2012
(Est.) release date: September 2013
(Est.) initial retail price (in USD): $149
Type: single-board computer
FCC ID: QR4WF5370M08
IC ID: 10663A-WF5370M08
Power: 6-15 VDC, 2 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID)
CPU1: Freescale (NXP) i.MX6DL (1.0 GHz, 2 cores)
CPU2: Atmel SAM3X8E (84 MHz)
FLA1: 0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> (Brand? Model?)
RAM1: 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (Micron MT41K128M16JT-125 × 4)
Expansion IFs: USB 2.0
USB ports: 3
Serial: yes, USB Female Micro-B, (115200 8N1), CN6
WI1 module: ECHIP GWF-3M08
WI1 module IF: USB
WI1 chip1: Ralink RT5370
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: PCB on-board
ETH chip1: Freescale (NXP) i.MX6DL
ETH chip2: Micrel KSZ9021RN
LAN speed: 1GbE
LAN ports: 1
bgn
Additional chips
AC’97 Audio Codec;VIA;VT1613;;1;
4-port USB Hub Controller;SMSC;USB2514B;;1;
8-bit Flash Microcontroller;Microchip;PIC10F200;;1;
Single-Chip USB to UART Bridge;Silicon Labs;CP2104;;1;
High-Speed USB 2.0 DPDT Switch;Alpha & Omega;AOZ6184;;1;
4-pin Microprocessor Power Supply Supervisor;On Semi;CAT811;;1;
4A 21V 500kHz Synchronous Step-Down Converter;Richtek;RT8287A;;3;
Quadruple FET Bus Switch;Texas Instruments;CBT3125PW;;1;
500mA Low Dropout Regulator;Richtek;RT9186A;;2;
DDR Termination Regulator;Richtek;RT9040;;1;
Stock bootloader: U-Boot 2014.04
Stock FW OS: Linux 3.14 Ubuntu 14.04
TPFirmware supported: Arch Linux ARM • (List | DLs), Debian, Android
Flags: Micro SD Card slot, Audio in/out (3.5mm), HDMI, LVDS, CSI, GPIO
802dot11 OUI: none specified
FCC ID | |
---|---|
ECHIP GWF-3M08 | QR4WF5370M08 |
UDOO Quad | QR4WF5370M08 |
For a list of all currently documented Atmel chipsets with specifications, see Atmel.
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Single-board Computer w/ Arduino Interface
Links
- UDOO Dual/Quad Documentation on UDOO.org Docs
- UDOO: Android Linux Arduino on Kickstarter
- UDOO Single Board Computer on CNX|Software
Hardware specification
- CPU: Freescale i.MX6DL Dual-core ARM (Cortex-A9)
- GPU: Vivante GC 880 + Vivante GC 320
- MCU: Atmel SAM3X8E ARM (Cortex-M3)
- Storage: TF card (max.64GB)/MMC card slot
- Memory: Micron 1GB (DDR3) SDRAM