USRobotics USR8022
USRobotics USR8022
Type: wireless router
FCC ID: BW3-DB-6802-L1, IOU1021S01
IC ID: 550A-15005
Power: 5 VDC, 2 A
Connector type: barrel
CPU1: Conexant CX82110 (132 MHz)
FLA1: 1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> (AMD Am29LV800BB-90EC)
RAM1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (GLT GLT5640L16-6TC)
Expansion IFs: PCMCIA (32-bit), Parallel
PCMCIA slots: 1
JTAG: yes, 20-pad header
Serial: yes, 9-pin header, DE-9
WI1 module: DBTel DB-6802
WI1 module IF: PCMCIA (32-bit)
WI1 chip1: Texas Instruments ACX100
WI1 chip2: RFMD Model?
WI1 802dot11 protocols: b
WI1 antenna connector: none
ETH chip1: Conexant CX82110
ETH chip2: Kendin KS8721B
Switch: Kendin KS8995E
LAN speed: 100M
LAN ports: 2
WAN speed: 100M
WAN ports: 1
b
Default SSID: USR8022
Default IP address: 192.168.123.254
the IP 192.168.123.254 is used by 28 additional devices
of which 3 are USRobotics devices
FCC ID | |
---|---|
DBTel DB-6802 | BW3-DB-6802-L1 |
FCC ID | |
---|---|
National Datacomm NWH1021 | IOU1021S01 |
For a list of all currently documented Conexant chipsets with specifications, see Conexant.
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
22Mbps Wireless Cable/DSL Router
FCC IDs for USR8022s appear to differ.. they may be BW3-DB-6802-L1,
- IOU1021SO1, or possibly something else.
The default SSID is presumably USR8022 (backed by ~2000 WiGLE
- entries and in the manual as the entry on the config page).
The default password is blank.
- • CPU: Conexant CX82110 (ARM940T @132MHz)
- • Flash: AMD AM29LV800 (1MB)
- • Switch: Kendin KS8995E (5-ports)
- • Eth PHY: Kendin KS8721B (2x Eth)
- • I/O: Winbond W83877TF (Par./Ser.)
- • PLD: Altera EMP3032A (32x)