Ubee DVW323
Ubee DVW323B
Manuf (OEM/ODM): Foxconn U10C071 .11
FCC approval date: 23 May 2013
Type: wireless eMTA, cable modem, analog phone gateway
FCC ID: XCNDXW3WB
Power: 120 VAC ~ 60 Hz, 0.9 A
Connector type: C7P
CPU1: Broadcom BCM3383
FLA1: ? MiB (Brand? Model?)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Samsung K4B1G1646G-BCH9)
Expansion IFs: USB 2.0
USB ports: 1
WI1 chip1: Broadcom BCM4331
WI1 802dot11 protocols: an
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL
WI2 chip1: Broadcom BCM4331
WI2 802dot11 protocols: bgn
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL
ETH chip1: Broadcom BCM3383
Switch: Broadcom Model?
LAN speed: 1G
LAN ports: 4
abgn
Flags: MoCA 2.0
Default SSID: DVW323BXX
, DVW323BXX-5G
802dot11 OUI: none specified
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
The FCC test report indicates that the following models are covered by the FCC ID used in this entry.
- DVW323 - with VoIP and MoCA (optional battery)
- appears to be board model U10C072.11
- DDW364 - without VoIP, with MoCA
- appears to be board model U10C071.10
- DVW328 - with VoIP, without MoCA (optional battery)
- appears to be board model U10C081.81
- DDW366 - without VoIP and MoCA
- appears to be board model U10C082.80
Per the FCC photos, this device is using...
- a Broadcom BCM3383 (BCM3383GKFEBG) Cable Modem SoC
- two Broadcom BCM4331 (BCM4331KMLG) Wi-Fi radios
- w/ 3x Skyworks (SiGe) SE5005L (5005L) 5GHz Power Amplifier ICs for the 5GHz radio
- w/ 3x Skyworks (SiGe) SE2604L (2604L) 2.4GHz Power Amplifier ICs for the 2.4GHz radio
- an Entropic Communications EN2710 (EN2710-LG2) MoCA 2.0 controller w/ accompanying EN1410K4
- a SMP SMPCM10 modular Li-ion battery (7.4VDC, 2.4Ahr 18.87Wh)
- an integrated Chicony Electronics power supply (checkboxes for N026R001L and N035R001L appear to be silkscreened on the PSU board)
The FCC sample sample indicates the default SSID patterns for this model is DVW323BXX and DVW323BXX-5G (with XX being the last two digits of the Cable RF MAC Address).
- The default SSID patterns for the other device seem to be...
- DDW364: DDW364XX and DDW364XX-5G
- DDW366: DDW366.XXXXXX-2.4G and DDW366.XXXXXX-5G (XXXXXX = last 6 digits of the Wi-Fi MAC)
- DVW328: DVW328.XXXXXX-2.4G and DVW328.XXXXXX-5G (XXXXXX = last 6 digits of the Wi-Fi MAC)