Ubiquiti Networks UniFi AP Outdoor+ (UAP-Outdoor+)
Ubiquiti Networks UniFi AP Outdoor+ (UAP-Outdoor+)
Availability: now
Type: outdoor access point
FCC ID: SWX-UAPOUTDOOR
IC ID: 6545A-UAPOUTDOOR
Power: 48 VDC, 0.5 A
Connector type: Ethernet (PoE)
PoE tag: 802.3af, standard
CPU1: Atheros AR7242 (400 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Eon EN25QH128)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Winbond W9751G6KB-25)
Expansion IFs: none specified
WI1 chip1: Atheros AR9283
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: RP-SMA
ETH chip1: Atheros AR7242
LAN speed: 100M
LAN ports: 2
bgn
Default IP address: acquired via DHCP
the IP acquired via DHCP is used by 211 additional devices
of which 0 are Ubiquiti Networks devices
802dot11 OUI: none specified
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| Ubiquiti Networks UniFi AP | Atheros | Atheros | |
| Ubiquiti Networks UniFi AP Outdoor+ (UAP-Outdoor+) | Atheros | Atheros | |
| Ubiquiti Networks UniFi AP Pro | Atheros | Atheros |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
Outdoor 802.11n Access Point
The Ubiquiti Networks logo, "R2_HSR", and a PLOTECH tag
- is silkscreened on the board in the FCC photos.
The FCC QSG specifies the following...
- The dimensions of the device are 205 mm x 83 mm x 37 mm.
- The weight of the device is 250 g0.25 kg <br />8.818 oz <br />0.551 lbs <br />.
The PoE injector shown in the FCC photos is an Ubiquiti branded GP-B480-050.
- This device is using UBNT's airPRISM tech (active RF filtering)
- This device is assumed to be using an Atheros AR724x SoC.
