Ubiquiti Networks airGateway
Ubiquiti Networks airGateway
FCC approval date: 06 February 2013
Type: access point
Power: 12-24 VDC, ? A
Connector type: Ethernet (PoE)
PoE tag: non-standard
CPU1: Atheros AR9331
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Winbond W25Q64FVZPIG;)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (EtronTech EM6AA160TSB-5G)
Expansion IFs: none specified
Serial: yes, internal, 4-pin header, 3.3V TTL
WI1 chip1: Atheros AR9331
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none
ETH chip1: Atheros AR9331
Switch: Atheros AR9331
LAN speed: 100M
LAN ports: 1
WAN speed: 100M
WAN ports: 1
bgn
Flags: PoE injector
Default SSID: www.ubnt.com (2 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1297 additional devices
of which 21 are Ubiquiti Networks devices
Default login user: ubnt
Default login password: ubnt
ubnt:ubnt credentials used by 29 additional devices
of which 29 are Ubiquiti Networks devices
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
On the Ubiquiti Networks forum
This device has a male RJ45 connector (to be connected to an active PoE port), a LAN port, and an active PoE port (which is meant to be connected to an airMAX Gateway)].
There is no AirMax support for this device. (no extended freq range..)
Default settings are per the FCC quick start guide.
This device is presumed to use a DC:9F:DB (Ubiquiti Networks) per a MAC label on the board in the FCC photos.
