User:DarkShadow/WikiDevi Templates/Generic DD-WRT serial recovery
Jump to navigation
Jump to search
Modified redhawk0 instructions # Print out these instructions for Off-Line use # Connect PC to router with a network cable # Configure PC with a static IP of 192.168.1.10 # Connect Serial cable # Start one of the programs from above # Get [ftp://dd-wrt.com/others/tornado/Windows-TFTP/tftp2.exe TFTP] ready with file selected # Use [path to file here] # Connect power to the router # start a rapid fire Cntl-C as you plug the router to power # type "nvram erase" w/o quotes, hit enter # type "flash -noheader : flash1.trx" w/o quotes, this starts the tftp daemon, hit enter # but have [ftp://dd-wrt.com/others/tornado/Windows-TFTP/tftp2.exe TFTP] ready # Click go or start on [ftp://dd-wrt.com/others/tornado/Windows-TFTP/tftp2.exe TFTP] # give it 5 minutes after it finishes # then power cycle....[[Category:Fix Link]][[dd-wrt-wiki:Hard_reset_or_30/30/30|Hard reset or 30/30/30]]...then config # when it stops spitting out txt....hit the enter key...you should get a login prompt...at that point, power cycle it, hard reset...then config # you'll see it boot up
|
|