WatchGuard AP200

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

WatchGuard AP200 v1.0.2
Availability: EoL (07/01/2019)

Manuf (OEM/ODM): Senao CAP4200AG

FCC approval date: 28 November 2012
Country of manuf.: Taiwan

Amazon image

ASIN
B00DPODN9S (Flag of the United States.svg, On Amazon, On CCC)
On Newegg

Type: access point

FCC ID: U2M-CAP4200AG
IC ID: 3616C-CAP4200AG
PCB ID: 7016A0507001

Power: 12 VDC, 1.25 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID), 9.5 mm (LEN)
PoE tag: 802.3af/at, standard

CPU1: Atheros AR9344 (533 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Macronix MX25L12845EMI-10G)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Nanya NT5TU32M16DG-AC × 2)

Expansion IFs: none specified
Serial: yes, 4-pin header, populated, 3.3V TTL, (115200 8N1)

WI1 chip1: Atheros AR9344
WI1 802dot11 protocols: an
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL (internal)
WI2 chip1: Atheros AR9382
WI2 802dot11 protocols: bgn
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL (internal)

ETH chip1: Atheros AR9344
ETH chip2: Atheros AR8035-A
LAN speed: 1GbE
LAN ports: 1

abgn

Additional chips
1-Channel Photocoupler;LiteOn;LTV-817;;1;
150V N-Channel MOSFET;Vishay Siliconix;Si4848DY;;3;
5GHz Power Amplifier w/Power Detector;SiGe;SE2537L;;2;
802.3at PoE Interface and DC/DC Controller;TI;TPS23754;;1;
2.4GHz High-Gain Power Amplifier;Silicon Storage Technology;SST12LP15A;;2;

Stock bootloader: U-Boot 1.1.4

Stock FW OS: Linux 2.6.31

Flags: PoE in

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 2 are WatchGuard devices

802dot11 OUI: 00:90:7F (20 E, 12 W)
Ethernet OUI: 00:90:7F (20 E, 12 W)

 FCC ID
AirTight Networks C-55U2M-CAP4200AG
Senao CAP4200AGU2M-CAP4200AG
WatchGuard AP100U2M-CAP2100AG
U2M-CAP4200AG

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.


WatchGuard AP200 Indoor (Plenum) Access Point

Hardware Guide

"7016A0507001 Ver: 1.00" is silkscreened on the board in the FCC photos.

Hardware specification

  • CPU: Atheros AR9344 MIPS 74K (@533MHz)
  • Memory: 128MB (SDRAM) DDR2
  • Storage: 8MB SPI NOR Flash
  • WiFi: Atheros AR9344 (802.11an)
Atheros AR9382 (802.11bgn)
  • Network: 1x Gigabit Ethernet ports
  • Power: 12V, 1.25A via barrel or 802.3af/at PoE

Images