Western Digital My Net AC1300

Western Digital My Net AC1300

Manuf (OEM/ODM): CyberTAN

FCC approval date: 30 October 2012
(Est.) release date: 14 November 2012
(Est.) initial retail price (in USD): $189.99
UPC: 718037800271 (UPC DB, On eBay)
Country of manuf.: China

Amazon image

ASIN
B00A14ZUIM (, On Amazon, On CCC)

Type: wireless router

FCC ID: N89-EWW501A1
IC ID: 5005A-EWW501A1

Power: 12 VDC, 3 A
Connector type: barrel

CPU1: Broadcom BCM4706 (600 MHz)
FLA1: 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond W25Q128FVFG)
RAM1: 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Winbond W9751G6KB-25 × 2)

Expansion IFs: USB 2.0, Mini PCIe
USB ports: 2
Serial: yes, internal, 5-pin header, unpopulated, DJ1, (115200,8,N,1), 3.3V TTL

WI1 module: unknown
WI1 module IF: Mini PCIe (oversized)
WI1 chip1: Broadcom BCM4360
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL
WI2 chip1: Broadcom BCM4331
WI2 802dot11 protocols: bgn
WI2 MIMO config: 3x3:3
WI2 antenna connector: none

ETH chip1: Broadcom BCM4706
Switch: Broadcom BCM53125
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1

abgn+ac

Additional chips
4-port USB hub controller;Cypress Semiconductor;CY7C65632;CY7C656, 32 1231, 5Y27958;1;
Four output PCIe Clock Generator;Cypress Semiconductor;CY24292;CY24292, LXFC, 1231 TWN, 630108;1;

Stock bootloader: CFE 6.30.39.30 (r339013) BCM947XX

Stock FW OS: Linux 2.6.22

Default SSID: MyNetAC1300
, MyNetAC1300_5G
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 5 are Western Digital devices
Default login user: admin
Default login password: password
admin:password credentials used by 423 additional devices
of which 6 are Western Digital devices

802dot11 OUI: 00:90:A9 (8 E, 7 W)
Ethernet OUI: 00:90:A9 (8 E, 7 W)

	FCC ID
Linksys EA6500 v1	Q87-EA6500 N89-EWW501A1

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

---

Product page

WD Model J2F

"3763-30100103R" is silkscreened on the main board in the FCC photos.

"3751-24600105R" is silkscreened on the wireless module.

The default credentials are from the FCC manual.

Additional external links

Reviews

• On SmallNetBuilder

Serial

Pinout

  DJ1
1 [...] (TxD) (RxD) (...) (GND) 5

Info derived from

• Bootloader log from a misflashed unit

CFE version 6.30.39.30 (r339013) based on BBP 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: Mon Sep 24 10:19:31 CST 2012 (root@localhost.localdomain) Copyright (C) 2000-2008 Broadcom Corporation. Init Arena Init Devs. Boot partition size = 262144(0x40000) Found an ST compatible serial flash with 256 64KB blocks; total size 16MB No NAND flash type found bcm_robo_enable_switch: EEE is disabled et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.39.30 (r339013) CPU type 0x19749: 600MHz Tot mem: 131072 KBytes CFE mem: 0x80700000 - 0x8084D150 (1364304) Data: 0x80736EC0 - 0x8073A150 (12944) BSS: 0x8073A150 - 0x8074B150 (69632) Heap: 0x8074B150 - 0x8084B150 (1048576) Stack: 0x8084B150 - 0x8084D150 (8192) Text: 0x80700000 - 0x80736EB8 (224952) Boot version: v6.1 The boot is CFE mac:257792 edward ====BOOTNV_SUPPORT = 0 RESERVE_MAC[8] PER_MAC_LEN[18] src2 BFC3EF00 dst2 8084CD0E mac_init(): Find mac [00:90:A9:00:13:37] in location 0 Nothing... No country code find ### CLKDIV= 0x80a082c, SFlashClkDiv=8 clkdivsf=2 ### ### Change it to 0x20a082c (2) ### Device eth0: hwaddr 00-90-A9-00-13-37, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set Boot program checksum is invalid trx_failed -34 Reading :: Failed.: Timeout occured ret -21 CFE_ERR_TIMEOUT -21

• boot log, FW 1.03.09

CFE version 6.30.39.30 (r339013) based on BBP 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: Mon Sep 24 10:19:31 CST 2012 (root@localhost.localdomain) Copyright (C) 2000-2008 Broadcom Corporation. Init Arena Init Devs. Boot partition size = 262144(0x40000) Found an ST compatible serial flash with 256 64KB blocks; total size 16MB No NAND flash type found bcm_robo_enable_switch: EEE is disabled et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.39.30 (r339013) CPU type 0x19749: 600MHz Tot mem: 131072 KBytes CFE mem: 0x80700000 - 0x8084D150 (1364304) Data: 0x80736EC0 - 0x8073A150 (12944) BSS: 0x8073A150 - 0x8074B150 (69632) Heap: 0x8074B150 - 0x8084B150 (1048576) Stack: 0x8084B150 - 0x8084D150 (8192) Text: 0x80700000 - 0x80736EB8 (224952) Boot version: v6.1 The boot is CFE mac:257792 edward ====BOOTNV_SUPPORT = 0 RESERVE_MAC[8] PER_MAC_LEN[18] src2 BFC3EF00 dst2 8084CD0E mac_init(): Find mac [00:90:A9:00:13:37] in location 0 Nothing... No country code find ### CLKDIV= 0x80a082c, SFlashClkDiv=8 clkdivsf=2 ### ### Change it to 0x20a082c (2) ### Device eth0: hwaddr 00-90-A9-00-13-37, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set trx_failed 0 ui_cmd_go bufsize 125513392 Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null) Loading: Failed. Could not load :: Timeout occured Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: ....... 4170872 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 Linux version 2.6.22 (root@debian) (gcc version 4.2.3) #1 PREEMPT Thu Feb 7 21:04:37 CST 2013 CPU revision is: 00019749 Found an ST compatible serial flash with 256 64KB blocks; total size 16MB Determined physical RAM map: memory: 07fff000 @ 00000000 (usable) Zone PFN ranges: Normal 0 -> 32767 HighMem 32767 -> 32767 early_node_map[1] active PFN ranges 0: 0 -> 32767 Built 1 zonelists. Total pages: 32767 Kernel command line: root=/dev/mtdblock2 console=ttyS0,115200 init=/sbin/preinit Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). PID hash table entries: 512 (order: 9, 2048 bytes) CPU: BCM5300 rev 1 at 600 MHz Using 300.000 MHz high precision timer. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 125240k/131068k available (3372k kernel code, 5688k reserved, 483k data, 216k init, 0k highmem) Mount-cache hash table entries: 512 NET: Registered protocol family 16 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Initializing host PCI: Reset RC PCI: Initializing host PCI: Reset RC PCI: Fixing up bus 0 PCI/PCIe coreunit 0 is set to bus 1. PCI: Fixing up bridge PCI: Fixing up bridge PCI: Enabling device 0000:01:00.1 (0004 -> 0006) PCI: Fixing up bus 1 PCI/PCIe coreunit 1 is set to bus 2. PCI: Fixing up bridge PCI: Fixing up bridge PCI: Enabling device 0000:02:00.1 (0004 -> 0006) PCI: Fixing up bus 2 NET: Registered protocol family 2 Time: MIPS clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher fuse init (API version 7.8) io scheduler noop registered (default) HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096 N_HDLC line discipline registered. Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A serial8250: ttyS1 at MMIO 0x0 (irq = 8) is a 16550A loop: module loaded PPP generic driver version 2.4.2 NET: Registered protocol family 24 pflash: found no supported devices sflash: squash filesystem with lzma found at block 29 Creating 4 MTD partitions on "sflash": 0x00000000-0x00040000 : "boot" 0x00040000-0x00ff0000 : "linux" 0x001dd5d4-0x00ff0000 : "rootfs" 0x00ff0000-0x01000000 : "nvram" usbmon: debugfs is not available ehci_hcd 0000:00:04.1: EHCI Host Controller ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:04.1: EHCI Fastpath: New EHCI driver starting ehci_hcd 0000:00:04.1: irq 6, io mem 0x18004000 ehci_hcd 0000:00:04.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice usb_device_match: usb device level 0 usb_device_match: usb device level 0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice usb_device_match: usb device level 1 usb_device_match: usb device level 1 hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. u32 classifier Actions configured nf_conntrack version 0.5.0 (1023 buckets, 8184 max) nf_conntrack_rtsp v0.6.21 loading GRE over IPv4 tunneling driver nf_nat_rtsp v0.6.21 loading ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions NET: Registered protocol family 17 Ebtables v2.0 registered 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 216k freed Warning: unable to open an initial console. Failed to execute /init ctmisc: module license 'unspecified' taints kernel. Register /dev/ctmisc device, major:10 minor:255 cmd=[touch /tmp/var/lib/nfs/xtab ] cmd=[chmod 644 /tmp/var/lib/nfs/xtab ] cmd=[touch /tmp/var/lib/nfs/etab ] cmd=[chmod 644 /tmp/var/lib/nfs/etab ] cmd=[touch /tmp/var/lib/nfs/rmtab ] cmd=[chmod 644 /tmp/var/lib/nfs/rmtab ] cmd=[touch /tmp/var/lib/nfs/state ] cmd=[chmod go-rwx /tmp/var/lib/nfs/state ] cmd=[touch /tmp/disk_updating_lock ] cmd=[chmod 644 /tmp/disk_updating_lock ] cmd=[touch /tmp/file_variable_updating_lock ] cmd=[chmod 644 /tmp/file_variable_updating_lock ] Algorithmics/MIPS FPU Emulator v1.5 cmd=[/sbin/hotplug2 --coldplug & ] /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory [sighandler]: No more events to be processed, quitting. [cleanup]: Waiting for children. [cleanup]: All children terminated. cmd=[misc -t get_mac -w 3 ] ctmisc_ioctl: cmd=0x11, buffer size=260 data_init(): base = 0xbfc3ef00 data_init(): location = [1], mydatas index = 1 ctmisc_ioctl: index=1 tallest:=====(ctmisc ioctl done...)===== get_data(): Get MAC count is [1] get_data(): MAC 0: [00:90:A9:00:13:37] get_data(): done cmd=ctmisc_ioctl: cmd=0x15, buffer size=260 [misc -t get_sn data_init(): base = 0xbfc3fe30 -w 3 ] data_init(): location = [1], mydatas index = 1 ctmisc_ioctl: index=1 tallest:=====(ctmisc ioctl done...)===== get_data(): Get SN count is [1] get_data(): SN 0: [WNH432500900] get_data(): done cmd=[misc -ctmisc_ioctl: cmd=0x2c, buffer size=260 t get_country -wdata_init(): base = 0xbfc3fd30 3 ] data_init(): location = [0], mydatas index = 0 ctmisc_ioctl: index=0 tallest:=====(ctmisc ioctl done...)===== get_data(): Get COUNTRY count is [0] get_data(): done ctmisc_ioctl: cmd=0x2e, buffer size=260 data_init(): base = 0xbfc3fc30 data_init(): location = [0], mydatas index = 0 ctmisc_ioctl: index=0 tallest:=====(ctmisc ioctl done...)===== get_data(): Get 2G_COUNTRY_CODE count is [0] get_data(): done cmd=[misc -t get_5g_country_codectmisc_ioctl: cmd=0x5e, buffer size=260 -w 3 ] data_init(): base = 0xbfc3fb30 data_init(): location = [0], mydatas index = 0 ctmisc_ioctl: index=0 tallest:=====(ctmisc ioctl done...)===== get_data(): Get 5G_COUNTRY_CODE count is [0] get_data(): done wps_device_pin == 74504435 cmd=[misc -t get_pa2ctmisc_ioctl: cmd=0x28, buffer size=260 ga0idxval -w 3 ]data_init(): base = 0xbfc3f6c0 data_init(): location = [0], mydatas index = 0 ctmisc_ioctl: index=0 tallest:=====(ctmisc ioctl done...)===== get_data(): Get PA2GA0IDXVAL count is [0] get_data(): done cmd=[misc -t get_pa2ga1idxval -w 3 ctmisc_ioctl: cmd=0x2a, buffer size=260 ] data_init(): base = 0xbfc3f600 data_init(): location = [0], mydatas index = 0 ctmisc_ioctl: index=0 tallest:=====(ctmisc ioctl done...)===== get_data(): Get PA2GA1IDXVAL count is [0] get_data(): done cmd=[misc -t get_pa2ga2idxval -w 3 ctmisc_ioctl: cmd=0x30, buffer size=260 ] data_init(): base = 0xbfc3f540 data_init(): location = [0], mydatas index = 0 ctmisc_ioctl: index=0 tallest:=====(ctmisc ioctl done...)===== get_data(): Get PA2GA2IDXVAL count is [0] get_data(): done Using default 2G PA0 value Using default 2G PA1 value Using default 2G PA1 value Restoring Storage Nvram Defaults cmd=[insmod ctf ] cmd=[insmod ipv6 ] insmod: ipv6.ko: no module by that name found cmd=[insmod emf ] cmd=[insmod igs ] cmd=[insmod et ] cmd=[insmod bcm57xx ] insmod: bcm57xx.ko: no module by that name found cmd=[insmod dpsta ] insmod: dpsta.ko: no module by that name found cmd=[insmod wl ] cmd=[insmod /lib/ufsd.ko ] cmd=[insmod usbcore ] insmod: usbcore.ko: no module by that name found cmd=[insmod usb-storage ] insmod: usb-storage.ko: no module by that name found cmd=[insmod ehci-hcd log2_irq_thresh=0 qtdc_pid=0 qtdc_vid=0 qtdc0_ep=0 qtdc0_sz=0 qtdc1_ep=0 qtdc1_sz=0 ] insmod: ehci-hcd.ko: no module by that name found cmd=[insmod wl_high instance_base=2 ] insmod: wl_high.ko: no module by that name found eth3: cmd=14: No such device wl1 not up in 3 sec cmd=[insmod nf_conntrack_sip ] cmd=[insmod nf_nat_sip ] cmd=[insmod dnshook ] cmd=[insmod /lib/NetUSB.ko ] cmd=[adduser -p wd_user -g root ] addgroup: group 0 already exists adduser: /tmp/ftproot/wd_user: No such file or directory Changing password for wd_user Password for wd_user changed by root Failed trying to open `/proc/mdstat': No such file or directory Failed trying to open `/proc/sestat': No such file or directory Failed trying to open `/proc/mdstat': No such file or directory Failed trying to open `/proc/sestat': No such file or directory Hit enter to continue...cmd=[et robowr 0x02 0x06 0x001000a0 ] cmd=[et robowr 0x00 0x12 0x020b ] cmd=[wl -i eth2 filter_war 1 ] cmd=[resetbutton ] cmd=[vconfig set_name_type VLAN_PLUS_VID_NO_PAD ] cmd=[vconfig add eth0 1 ] cmd=[vconfig set_ingress_map vlan1 0 0 ] cmd=[vconfig set_ingress_map vlan1 1 1 ] cmd=[vconfig set_ingress_map vlan1 2 2 ] cmd=[vconfig set_ingress_map vlan1 3 3 ] cmd=[vconfig set_ingress_map vlan1 4 4 ] cmd=[vconfig set_ingress_map vlan1 5 5 ] cmd=[vconfig set_ingress_map vlan1 6 6 ] cmd=[vconfig set_ingress_map vlan1 7 7 ] cmd=[vconfig add eth0 2 ] cmd=[vconfig set_ingress_map vlan2 0 0 ] cmd=[vconfig set_ingress_map vlan2 1 1 ] cmd=[vconfig set_ingress_map vlan2 2 2 ] cmd=[vconfig set_ingress_map vlan2 3 3 ] cmd=[vconfig set_ingress_map vlan2 4 4 ] cmd=[vconfig set_ingress_map vlan2 5 5 ] cmd=[vconfig set_ingress_map vlan2 6 6 ] cmd=[vconfig set_ingress_map vlan2 7 7 ] cmd=[brctl addbr br0 ] cmd=[brctl setfd br0 0 ] cmd=[brctl stp br0 on ] cmd=[wlconf vlan1 up ] vlan1: WLC_GET_VAR(cap): Operation not supported cmd=[brctl addif br0 vlan1 ] Write wireless mac successfully cmd=[wlconf eth1 up ] eth1: WLC_SET_VAR(apsta): Operation not supported eth1: cmd=231: Operation not supported eth1: WLC_SET_VAR(psta): Operation not supported eth1: WLC_SET_VAR(chanspec): Invalid argument eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(bg_rate): Operation not supported eth1: WLC_SET_VAR(a_rate): Operation not supported eth1: WLC_SET_VAR(bg_rate): Operation not supported eth1: WLC_SET_VAR(a_rate): Operation not supported eth1: WLC_SET_VAR(bg_mrate): Operation not supported eth1: WLC_SET_VAR(a_mrate): Operation not supported eth1: WLC_SET_VAR(bg_mrate): Operation not supported eth1: WLC_SET_VAR(a_mrate): Operation not supported eth1: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported eth1: cmd=64: Operation not supported cmd=[brctl addif br0 eth1 ] Write wireless mac successfully cmd=[wlconf eth2 up ] eth2: WLC_SET_VAR(apsta): Operation not supported eth2: cmd=231: Operation not supported eth2: WLC_SET_VAR(psta): Operation not supported eth2: WLC_SET_VAR(chanspec): Invalid argument eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(bg_rate): Operation not supported eth2: WLC_SET_VAR(a_rate): Operation not supported eth2: WLC_SET_VAR(bg_rate): Operation not supported eth2: WLC_SET_VAR(a_rate): Operation not supported eth2: WLC_SET_VAR(bg_mrate): Operation not supported eth2: WLC_SET_VAR(a_mrate): Operation not supported eth2: WLC_SET_VAR(bg_mrate): Operation not supported eth2: WLC_SET_VAR(a_mrate): Operation not supported eth2: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported eth2: cmd=64: Operation not supported cmd=[brctl addif br0 eth2 ] Set 1 to /proc/sys/net/ipv6/conf/br0/forwarding ... cmd=[killall radvd ] killall: radvd: no process killed cmd=[killall dhcpd6 ] killall: dhcpd6: no process killed cmd=[ip6tables -t filter -F ] cmd=[ip6tables -t filter -Z ] cmd=[ip6tables -t mangle -F ] cmd=[ip6tables -t mangle -Z ] cmd=[igmpxmld -v -b -u -d br0 -q 0 -m 6to6 ] VID: 0 MAC: 33:33:00:00:00:01 Entry :0 Valid: 1 Static: 1 Age: 0 TC: 0 Port ID: 0000000100011110 VID: 0 MAC: 33:33:00:00:00:02 Entry :0 Valid: 1 Static: 1 Age: 0 TC: 0 Port ID: 0000000100100000 VID: 0 MAC: 33:33:00:00:00:16 Entry :0 Valid: 1 Static: 1 Age: 0 TC: 0 Port ID: 0000000100111110 cmd=[ip6tables-restore /tmp/.ip6t ] cmd=[klogd ] cmd=[syslogd -m 0 -O /var/log/mess ] cmd=[httpd ] cmd=[touch /tmp/hosts ] cmd=[/usr/sbin/dnsmasq -R -h -i br0 -i br1 -c 0 -r /tmp/resolv.conf ] Use dynamic port main: socket AF_INET: 192.168.1.1 cmd=[/usr/sbin/dhcpd -cf /tmp/dhcpd-br0.conf -lf /tmp/dhcpd.leases -df /tmp/udhcpd.leases -pf /var/run/dhcpd.pid br0 ] Internet Systems Consortium DHCP Server 4.1.1-P1 Copyright 2004-2010 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Wrote 0 leases to leases file. Listening on Socket/br0/192.168.1.0/24 Sending on Socket/br0/192.168.1.0/24 cmd=[igd -D ] cmd=[/bin/eapd ] eth1: WLC_GET_VAR(psta_if): Operation not supported eth1: WLC_GET_VAR(psta_if): Operation not supported eth2: WLC_GET_VAR(psta_if): Operation not supported eth2: WLC_GET_VAR(psta_if): Operation not supported cmd=[nas ] cmd=[killall wps_monitor ] killall: wps_monitor: no process killed cmd=[/bin/wps_monitor ] cmd=[ses_cl -f ] ses_cl: No such file or directory WARNING: console log level set to 1 cmd=[lld2d br0 ] LLTD: wireless interface argument is eth1. ### wps_wfi_init(): cmd=[/usr/sbin/acsd ] <wl0_wfi_enable=(null)><wl1_wfi_enable=(null)>WFI is not enabled ### acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: selected channel spec: 0xe09b acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: selected channel spec: 0x1001 cmd=[wl -i eth2 filter_war 1 ] cmd=[/usr/sbin/acs_cli max_acs 10 ] 10 cmd=[/usr/sbin/acs_cli lockout_period 60 ] 60 sec cmd=[killall smbd ] killall: smbd: no process killed cmd=[killall nmbd ] killall: nmbd: no process killed cmd=[echo -gro 0 ] cmd=[echo -gro 2 ] samba was enabled Failed trying to open `/proc/mdstat': No such file or directory Failed trying to open `/proc/sestat': No such file or directory Failed trying to open `/proc/mdstat': No such file or directory Failed trying to open `/proc/sestat': No such file or directory cmd=[/usr/local/samba/sbin/nmbd ] cmd=[/usr/local/samba/sbin/smbd -D ] cmd=[adduser -p wd_user -g root ] adduser: wd_user: login already in use cmd=[echo ] cmd=[echo ] Added user wd_user. cmd=[/sbin/monitor_cable ] cmd=[killall -9 vsftpd ] killall: vsftpd: no process killed cmd=[llmnr ] proxy: llmnr cmd=[wdrouter -D ] cmd=[/usr/sbin/arp -c ] cmd=[tftpd -s /tmp -c -l -P WDHNBRCD ] cmd=[route del -net 224.0.0.0 netmask 240.0.0.0 dev br0 ] route: ioctl 0x890c failed: No such process The boot is CFE tftp server started tftpd: standalone socket cmd=[route add -net 224.0.0.0 netmask 240.0.0.0 dev br0 ] cmd=[/usr/sbin/mDNSResponderPosix -b -i br0 -e WDRouter -e MyNetAC1300 -f /tmp/mDNSResponder.conf ] cmd=[cron ] cron: No such file or directory cron: created cmd=[wlconf vlan2 up ] vlan2: WLC_GET_VAR(cap): Operation not supported cmd=[wlconf vlan2 start ] cmd=[dhclient -nw -cf /tmp/dhcpc-wan.conf -sf /tmp/dhcpc -lf /tmp/dhcpc-wan.leases -pf /var/run/dhcpc-wan.pid vlan2 ] cmd=[killall ntpclient ] killall: ntpclient: no process killed cmd=[touch /tmp/hosts ] cmd=[wlconf vlan1 start ] cmd=[wlconf eth1 start ] cmd=[wlconf eth2 start ] cmd=[wl -i eth2 filter_war 1 ] cmd=[iptables -t mangle -F ] cmd=[killall stats ] killall: stats: no process killed cmd=[killall ntpclient ] killall: ntpclient: no process killed cmd=[killall ip-up ] killall: ip-up: no process killed cmd=[killall ip-down ] killall: ip-down: no process killed cmd=[killall -1 pppoecd ] killall: pppoecd: no process killed cmd=[killall pppoecd ] killall: pppoecd: no process killed cmd=[killall -9 pppd ] killall: pppd: no process killed cmd=[killall -9 pptp ] killall: pptp: no process killed cmd=[killall -9 listen ] killall: listen: no process killed cmd=[killall -15 pppd ] killall: pppd: no process killed cmd=[killall -9 pppd ] killall: pppd: no process killed cmd=[killall -15 l2tpd ] killall: l2tpd: no process killed cmd=[killall -9 l2tpd ] killall: l2tpd: no process killed cmd=[killall -9 listen ] killall: listen: no process killed cmd=[dhclient -r -x -cf /tmp/dhcpc-wan.conf -sf /tmp/dhcpc -lf /tmp/dhcpc-wan.leases -pf /var/run/dhcpc-wan.pid vlan2 ] cmd=[killall wan_auto_detect ] killall: wan_auto_detect: no process killed cmd=[killall internet_check ] killall: internet_check: no process killed cmd=[killall ping ] killall: ping: no process killed Hit enter to continue...