Western Digital My Net N750

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Western Digital My Net N750 (E2F)
Availability: discontinued

Manuf (OEM/ODM): Alpha Networks WRG-ND13 A1

FCC approval date: 12 April 2012
(Est.) release date: 14 June 2012
(Est.) initial retail price (in USD): $120
UPC: 718037786506 (UPC DB, On eBay)
Country of manuf.: China

Amazon image

ASIN
B007KZQM9Q (Flag of the United States.svg, On Amazon, On CCC)

Type: wireless router

FCC ID: RRK-E2F
IC ID: 4833A-E2F
PCB ID: 8WRGND13.2A1G

Power: 12 VDC, 2 A
Connector type: barrel

CPU1: Atheros AR9344 (560 MHz)
FLA1: 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond W25Q128BVFG)
RAM1: 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (ESMT M14D5121632A-2.5B × 2)

Expansion IFs: USB 2.0
USB ports: 2
JTAG: probably
Serial: yes, 5-pin header, 3.3V TTL, (115200 8N1), JP1

WI1 chip1: Atheros AR9344
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: Atheros AR9380
WI2 802dot11 protocols: an
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL

ETH chip1: Atheros AR9344
Switch: Atheros AR8327N
LAN speed: 1GbE
LAN ports: 4
WAN speed: 1GbE
WAN ports: 1

abgn

Additional chips
2.4GHz Power Amplifier IC;Richwave;RTC6691;692, 6691, A911;2;
5GHz Power Amplifier IC;Skyworks;SE5005L;SiGe, 5005L, 1486Z;3;
4-port USB hub controller;Genesys Logic;GL850G;;1;

Stock bootloader: U-Boot 1.1.4

Stock FW OS: Linux 2.6.31 LSDK-9.2.0_U8.834-svn2231

TPFirmware supported: OpenWrt • (List | Dev | DLs)

Flags: boot log

Default SSID: WesternDigital (3 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 5 are Western Digital devices
Default login user: admin
Default login password: password
admin:password credentials used by 423 additional devices
of which 6 are Western Digital devices

802dot11 OUI: 00:90:A9 (8 E, 7 W)
Ethernet OUI: 00:90:A9 (8 E, 7 W)

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.


Product page  • GPL Source Code for the device

"8WRGND13.2A1G" (board ID = wrgnd13 - Alpha Networks WRG-ND13)

is silkscreened on the board of a production unit.

This device is similar to the Western Digital My Net N600 (Alpha board ID of wrgnd16)..

but the N600 omits the GbE switch and uses AR9382 (2x2) instead of AR9380.

The default SSID for both bands is WesternDigital.

Wikis / Third party firmware projects

Reviews

Forum threads

applies to the N600, N750, N900 and N900 Central
telnet credentials for the device appear to be Alphanetworks:wrgnd13_wd_av

Serial

Pinout

The UART is accessible at the (handily populated) JP1.

The pinout appears to be as follows...

[TxD][GND][3.3]     [RxD]
                    (JP1 text)

Info derived from

 • Boot log • >>
U-Boot 1.1.4 (Mar 26 2012 - 21:53:42)

SVN revision: 51
Target board: WRG-ND13

DRAM:
sri
Wasp 1.2
wasp_ddr_initial_config(255): (32bit) ddr2 init
128 MB
Top of RAM usable for U-Boot at: 88000000
Reserving 242k for U-Boot at: 87fc0000
Reserving 192k for malloc() at: 87f90000
Reserving 44 Bytes for Board Info at: 87f8ffd4
Reserving 36 Bytes for Global Data at: 87f8ffb0
Reserving 128k for boot params() at: 87f6ffb0
Stack Pointer at: 87f6ff98
Now running in RAM - U-Boot at: 87fc0000
id read 0x100000ff
flash size 16 MB, sector count = 256
Flash: 16 MB
pci_init_board: PCIe PLL not set for 40MHz refclk
In:    serial
Out:   serial
Err:   serial
Net:   ag934x_enet_initialize...
 wasp  reset mask:c03300
WASP  ----> S17 PHY *
: cfg1 0x7 cfg2 0x7114
eth0: 00:90:a9:a6:23:bb
athrs17_reg_init: complete
eth0 up
GIGA: athrs17_link_down all port...
eth0
Hit any key to stop autoboot:  0
## Booting image at 9f070000 ...
Verifying Checksum ...
Uncompressing SEAMA linux.lzma ... OK
do_boot_linux entry = 80002000
## Transferring control to Linux (at address 00000000) ...
## Giving linux memsize in bytes, 134217728

Starting kernel ...

Booting Atheros AR934x
Linux version 2.6.31--LSDK-9.2.0_U8.834-svn2231 (bouble_hung@Zeus) 
 (gcc version 4.3.3 (GCC) ) #1 Thu Mar 29 22:49:45 CST 2012
flash_size passed from bootloader = 0
CPU revision is: 0001974c (MIPS 74Kc)
ath_sys_frequency: cpu srif ddr srif cpu 560 ddr 480 ahb 240
Determined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
User-defined physical RAM map:
 memory: 08000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00008000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00008000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Kernel command line: console=ttyS0,115200 root=/dev/mtdblock0 rw mem=128m
PID hash table entries: 512 (order: 9, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 111488k/131072k available (2817k kernel code, 19400k reserved, 
 812k data, 160k init, 0k highmem)
NR_IRQS:128
plat_time_init: plat time init done
Calibrating delay loop... 279.55 BogoMIPS (lpj=559104)
Mount-cache hash table entries: 512

****************ALLOC***********************
 Packet mem: 803c9640 (0xe00000 bytes)
********************************************

NET: Registered protocol family 16
PCI init:ath_pcibios_init
ath_pcibios_init(294): PCI CMD write: 0x356
registering PCI controller with io_map_base unset
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pci 0000:00:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:00.0: PME# disabled
Returning IRQ 64
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
ATH GPIOC major 0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 218
alg: No test for lzma (lzma-generic)
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered (default)
HDLC line discipline maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550A
console [ttyS0] enabled
brd: module loaded
PPP generic driver version 2.4.2
PPP MPPE Compression module registered
NET: Registered protocol family 24
cmdlinepart partition parsing not available
RedBoot partition parsing not available
No partitions found on flash bank 0
ELBOX CFI physmap flash device: 1000000 at 9f000000
cmdlinepart partition parsing not available
RedBoot partition parsing not available
No partitions found on flash bank 0
 ATH serial flash !!
ath-nor0: the flash image has SEAMA header
ath-nor0: squashfs filesystem found at offset 0x001c0040
Creating 11 MTD partitions on "ath-nor0":
0x0000001c0060-0x000000b5d060 : "rootfs"
0x000000070000-0x000000ff0000 : "upgrade"
0x000000050000-0x000000060000 : "devdata"
0x000000060000-0x000000070000 : "devconf"
0x000000ff0000-0x000001000000 : "radiocfg"
0x000000000000-0x000001000000 : "flash"
0x000000000000-0x000000040000 : "bootloader"
0x000000040000-0x000000050000 : "bdcfg"
0x000000fe0000-0x000000ff0000 : "devrev1"
0x000000fd0000-0x000000fe0000 : "devrev2"
0x000000fd0000-0x000000ff0000 : "devrev3"
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Port Status 1c000004
ath-ehci ath-ehci.0: ATH EHCI
ath-ehci ath-ehci.0: new USB bus registered, assigned bus number 1
ehci_reset Intialize USB CONTROLLER in host mode: 13
ehci_reset Port Status 1c000000
ath-ehci ath-ehci.0: irq 3, io mem 0x1b000000
ehci_reset Intialize USB CONTROLLER in host mode: 13
ehci_reset Port Status 1c000000
ath-ehci ath-ehci.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: ATH EHCI
usb usb1: Manufacturer: Linux 2.6.31--LSDK-9.2.0_U8.834-svn2231 ehci_hcd
usb usb1: SerialNumber: platform
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
u32 classifier
nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
xt_time: kernel timezone is -0000
BCM fast NAT: INIT
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
athwdt_init: Registering WDT success
ath_otp_init: Registering OTP success
ath_clksw_init: Registering Clock Switch Interface success
VFS: Mounted root (squashfs filesystem) readonly on device 31:0.
Freeing unused kernel memory: 160k freed
usb 1-1: new high speed USB device using ath-ehci and address 2
init started: BusyBox v1.14.1 (2012-03-29 22:49:59 CST)
starting pid 341, tty '': '/etc/init.d/rcS'
usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
usb 1-1: New USB device s
[/etc/init.d/S10init.sh]
[/etc/init.d/S14kcode.sh]
[/etc/init.d/S14paragon.sh]
[/etc/init.d/S15udevd.sh]
[/etc/init.d/S16ipv6.sh]
[/etc/init.d/S19init.sh]
[/etc/init.d/S20init.sh]
DEVCONF: no config data available (ret=-1) !
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!     Uable to read device config.     !!
!! Setting is reset to factory default. !!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  DEFNODE[/etc/defnodes/S11devdata.xml]
  DEFNODE[/etc/defnodes/S12flashspeed.php]
  DEFNODE[/etc/defnodes/S14setchlist.php]
  DEFNODE[/etc/defnodes/S20device.xml]
  DEFNODE[/etc/defnodes/S22timezone.php]
[/etc/scripts/setdate.sh] 01/01/2000 ...
Sat Jan  1 17:00:04 GMT 2000
  DEFNODE[/etc/defnodes/S23language.php]
  DEFNODE[/etc/defnodes/S30device.php]
  DEFNODE[/etc/defnodes/S30device.xml]
  DEFNODE[/etc/defnodes/S31diagnostic.xml]
  DEFNODE[/etc/defnodes/S31locale.php]
  DEFNODE[/etc/defnodes/S33wifi.php]
  DEFNODE[/etc/defnodes/S40device.xml]
  DEFNODE[/etc/defnodes/S40links.php]
  DEFNODE[/etc/defnodes/S90netstar.php]
  DEFNODE[/etc/defnodes/S90opendns.php]
  DEFNODE[/etc/defnodes/S90sessions.php]
  DEFNODE[/etc/defnodes/S90upnpigd.php]
  DEFNODE[/etc/defnodes/S90upnpwfa.php]
  DEFNODE[/etc/defnodes/S91upnpigd2.php]
  DEFNODE[/etc/defnodes/S91upnpwd.php]
INFO02C7:  use dev Name br0 : fail
SERVD: start service [LOGD]
[/etc/init.d/S21interfaces.sh]
Inserting gpio.ko ...
done.
Inserting athrs_gmac.ko ...
ATHR_GMAC: Length per segment 1536
ATHR_GMAC: fifo cfg 3 01f00140
ATHR_GMAC: RX TASKLET - Pkts per Intr:16
ATHR_GMAC: Mac address for unit 0:bfff0000
ATHR_GMAC: ff:ff:ff:ff:ff:ff
ATHR_GMAC: Max segments per packet :   1
ATHR_GMAC: Max tx descriptor count :   128
ATHR_GMAC: Max rx descriptor count :   128
ATHR_GMAC: Mac capability flags    :   2381
Inserting rebootm.ko ...
Rebootm loading ...
mknod: /dev/pts/0: Operation not permitted
mknod: /dev/pts/1: Operation not permitted
INFO02C7:  use dev Name br0 : fail
[/etc/init.d/S21usbmount.sh]
[/etc/init.d/S23udevd.sh]
[/etc/init.d/S45gpiod.sh]
mknod: /dev/gpio: File exists
[/etc/init.d/S46hd-idle.sh]
spin-down [600] ...
[/etc/init.d/rcS] done!
Factory reset tiATHRS17:[az] link partner has 802.3az feature, enable LPI (Phy: 4)
me : 5 secs
00 GPIO#11 : LED for Wireless       , OE is output mode, MUX value is GPIO_CONTROL
01 GPIO#12 : Internet LED Green     , OE is output mode, MUX value is GPIO_CONTROL
02 GPIO#13 : LED for WPS            , OE is output mode, MUX value is GPIO_CONTROL
03 GPIO#14 : Power_Status LED Green , OE is output mode, MUX value is GPIO_CONTROL
04 GPIO#15 : WLAN external lna 0    , OE is output mode, MUX value is 46
05 GPIO#17 : Factory Reset Button   , OE is input  mode, MUX value is GPIO_CONTROL
06 GPIO#18 : WLAN external lna 1    , OE is output mode, MUX value is 47
07 GPIO#19 : WPS Button             , OE is input  mode, MUX value is GPIO_CONTROL
gpiod: LAYOUT_ROUTER
getportstatus: old_wan_status=0 new_wan_status=1 diff_times=0
getportstatus: old_wan_status=0 new_wan_status=1 diff_times=1
getportstatus: old_wan_status=0 new_wan_status=1 diff_times=2
ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, WRITE_EEPROM, 11D)
ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
ath_dfs: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
INFO02C7:  use dev Name br0 : fail
ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
ath_ahb: 9.2.0_U9.915 (Atheros/multi-bss)
__ath_attach: Set global_scn[0]
ACBKMinfree = 48
ACBEMinfree = 32
ACVIMinfree = 16
ACVOMinfree = 0
CABMinfree = 48
UAPSDMinfree = 0
Restoring Cal data from Flash
dfs_attach: use DFS enhancements
DFS min filter rssiThresh = 18
DFS max pulse dur = 151 ticks
ath_get_caps[4913] rx chainmask mismatch actual 3 sc_chainmak 0
ath_get_caps[4888] tx chainmask mismatch actual 3 sc_chainmak 0
wifi0: Atheros 9340: mem=0xb8100000, irq=2
ath_pci: 9.2.0_U9.915 (Atheros/multi-bss)
__ath_attach: Set global_scn[1]
ACBKMinfree = 48
ACBEMinfree = 32
ACVIMinfree = 16
ACVOMinfree = 0
CABMinfree = 48
UAPSDMinfree = 0
Restoring Cal data from Flash
dfs_attach: use DFS enhancements
DFS min filter rssiThresh = 18
DFS max pulse dur = 151 ticks
ath_get_caps[4913] rx chainmask mismatch actual 7 sc_chainmak 0
ath_get_caps[4888] tx chainmask mismatch actual 7 sc_chainmak 0
wifi1: Atheros 9380: mem=0x10000000, irq=64 hw_base=0xb0000000
[/etc/init0.d/S21layout.sh]: start ...
SERVD: start service [LAYOUT]
INFO02C7:  use dev Name br0 : fail
[/etc/init0.d/S40event.sh]: start ...
athr_gmac_ring_alloc Allocated 2048 at 0x8644e800
athr_gmac_ring_alloc Allocated 2048 at 0x8644e000
WASP  ----> S17 PHY *
Setting Drop CRC Errors, Pause Frames and Length Error frames
Hello, nat module!
SERVD: event [SEALPAC.LOAD/default]
SEAMA: need meta for searching image.
[/etc/init0.d/S40gpioevent.sh]: start ...

######## S17 SSDK init succeeded! ########
athrs17_reg_init:done
Setting PHY...
Phy setup Complete
ATHRS17:[az] Phy 0 is NOT linked
ATHRS17:[az] write MAC Xon-Xoff regs (000009b4)
[az] 802.3az init done..
ATHRS17:[az] Phy 1 is NOT linked
ATHRS17:[az] write MAC Xon-Xoff regs (000009b8)
[az] 802.3az init done..
ATHRS17:[az] Phy 2 is NOT linked
ATHRS17:[az] write MAC Xon-Xoff regs (000009bc)
[az] 802.3az init done..
ATHRS17:[az] Phy 3 is NOT linked
ATHRS17:[az] write MAC Xon-Xoff regs (000009c0)
[az] 802.3az init done..
ATHRS17:[az] Phy 4 is NOT linked
ATHRS17:[az] write MAC Xon-Xoff regs (000009c4)
[az] 802.3az init done..
napt_ct_scan_thread: time: 4
napt_hash_init
set the age mode = 1
INFO02C7:  use dev Name br0 : fail
[/etc/init0.d/S41autowan.sh]: start ...
[/etc/init0.d/S41autowanv6.sh]: start ...
[/etc/init0.d/S41event.sh]: start ...
[/etc/init0.d/S41inf.sh]: start ...
[/etc/init0.d/S42pthrough.sh]: start ...
[/etc/init0.d/S65ddnsd.sh]: start ...
[/etc/init0.d/S65user.sh]: start ...
[/etc/init0.d/S80telnetd.sh]: start ...
Create /var/proc/alpha symbolic link...
bind br0 fail try again
Enable Fast Route
[/etc/init0.d/rcADDRCONF(NETDEV_UP): eth0: link is not ready S] done!

Please press Enter to activate this console. getportstatus: 
 old_wan_status=1 new_wan_status=0 diff_times=0
getportstatus: old_wan_status=1 new_wan_status=0 diff_times=1
getportstatus: old_wan_status=1 new_wan_status=0 diff_times=2
device eth0 entered promiscuous mode
device eth0.1 entered promiscuous mode
br0: port 1(eth0.1) entering forwarding state
SERVD: event [WANPORT.LINKDOWN] not found!
SERVD: start service [LOGD]
SERVD: service [LOGD] is already started.
SERVD: start service [BRIDGE]
BRIDGE: The device is not in the bridge mode.
SERVD: start service [LAN]
SERVD: start service [WAN]
INFO02D0:  use dev Name br0
INFO1597:  sleep to wait br0 end.
INFO15B0:  UDP_BROAD 7436 tcpPort:625868800
INFO02D0:  use dev Name br0
INFO14E7: tcpConnector() started...
SERVD: start service [DEVICE.PASSTHROUGH]
SERVD: start service [DEVICE.ACCOUNT]
Password for 'admin' has been updated
Password for 'wd_user' has been updated
SERVD: start service [PHYINF.ETH-1]
ATHRS17:[az] link partner has 802.3az feature, enable LPI (Phy: 0)
ATHRS17:[az] link partner has 802.3az feature, enable LPI (Phy: 1)
ATHRS17:[az] link partner has 802.3az feature, enable LPI (Phy: 2)
ATHRS17:[az] link partner has 802.3az feature, enable LPI (Phy: 3)
SERVD: start service [PHYINF.ETH-3]
SERVD: start service [PHYINF.WIFI]
SERVD: start service [IPTABLES]
insmod: can't insert '/lib/modules/ifresetcnt.ko': 
 unknown symbol in module, or unknown parameter
INFO13C4: Bind to br0
SERVD: start service [IP6TABLES]
SERVD: start service [IPTABLES]
SERVD: service [IPTABLES] is already started.
SERVD: start service [IP6TABLES]
SERVD: service [IP6TABLES] is already started.
SERVD: start service [INET.LAN-1]
[/var/servd/INET.LAN-1_start.sh]: starting LAN-1...
SERVD: event [LAN-1.UP/default]
/proc/nf_accelerate_to_local: can't create
[/var/servd/INET.LAN-1_start.sh]: starting LAN-1 done !!!
SERVD: start service [INET.LAN-2]
[/var/servd/INET.LAN-2_start.sh]: starting LAN-2...
SERVD: event [LAN-2.UP/default]
[/var/servd/INET.LAN-2_start.sh]: starting LAN-2 done !!!
SERVD: start service [INET.LAN-4]
#!/bin/sh
# No inet profile!!
exit 9

SERVD: start service [IPTMACCTRL]
SERVD: start service [IPTURLCTRL]
SERVD: start service [ACCESSCTRL]
SERVD: start service [IPTPORTT]
SERVD: start service [IP6T.LAN-1]
SERVD: start service [IP6T.LAN-2]
SERVD: start service [IP6T.LAN-3]
SERVD: start service [IP6T.LAN-4]
SERVD: start service [IPTABLES]
SERVD: service [IPTABLES] is already started.
SERVD: start service [IP6TABLES]
SERVD: service [IP6TABLES] is already started.
SERVD: start service [INET.WAN-1]
[/var/servd/INET.WAN-1_start.sh]: starting WAN-1...
[/var/servd/INET.WAN-1_start.sh]: starting WAN-1 done !!!
SERVD: start service [INET.WAN-2]
ifsetup: (WAN-2) not active.
SERVD: service [INET.WAN-2] return error 8.
SERVD: start service [INET.WAN-3]
[/var/servd/INET.WAN-3_start.sh]: starting WAN-3...
WAN-3 a is link local interface.
SERVD: event [WAN-3.UP/default]
[/var/servd/INET.WAN-3_start.sh]: starting WAN-3 done !!!
SERVD: start service [INET.WAN-4]
ifsetup: (WAN-4) not active.
SERVD: service [INET.WAN-4] return error 8.
SERVD: start service [IPTMASQ]
/proc/sys/net/ipv4/ip_personality_sport: can't create
/proc/sys/net/ipv4/ip_personality_enable: can't create
SERVD: start service [IPTVSVR]
SERVD: start service [IPTPFWD]
SERVD: start service [IPTPORTT]
SERVD: service [IPTPORTT] is already started.
SERVD: start service [IPTDMZ]
IPTDMZ: cnt= 1
SERVD: start service [IPT.WAN-1]
SERVD: start service [IP6T.WAN-1]
SERVD: start service [IPT.WAN-2]
SERVD: start service [IP6T.WAN-2]
SERVD: start service [IPT.WAN-3]
SERVD: start service [IP6T.WAN-3]
SERVD: start service [IPT.WAN-4]
SERVD: start service [IP6T.WAN-4]
SERVD: stop service [IPT.LAN-1]
SERVD: service [IPT.LAN-1] is already stopped.
SERVD: start service [IPT.LAN-1]
/proc/fastnat/forskipsupport: can't create
SERVD: stop service [IPT.LAN-2]
SERVD: service [IPT.LAN-2] is already stopped.
SERVD: start service [IPT.LAN-2]
/proc/fastnat/forskipsupport: can't create
SERVD: stop service [IPT.LAN-3]
SERVD: service [IPT.LAN-3] is already stopped.
SERVD: start service [IPT.LAN-3]
SERVD: service [IPT.LAN-3] return error 108.
SERVD: stop service [IPT.LAN-4]
SERVD: service [IPT.LAN-4] is already stopped.
SERVD: start service [IPT.LAN-4]
SERVD: service [IPT.LAN-4] return error 108.
SERVD: start service [PHYINF.BAND24G-1.1]
SERVD: start service [PHYINF.BAND24G-1.2]
SERVD: service [PHYINF.BAND24G-1.2] return error 8.
SERVD: start service [PHYINF.BAND5G-1.1]
SERVD: start service [PHYINF.BAND5G-1.2]
SERVD: service [PHYINF.BAND5G-1.2] return error 8.
SERVD: start service [PHYINF.STATION24G-1.1]
SERVD: service [PHYINF.STATION24G-1.1] return error 8.
SERVD: start service [PHYINF.STATION5G-1.1]
SERVD: service [PHYINF.STATION5G-1.1] return error 8.
SERVD: stop service [INFSVCS.LAN-1]
SERVD: service [INFSVCS.LAN-1] is already stopped.
SERVD: start service [INFSVCS.LAN-1]
SERVD: event [LAN-1.CONNECTED] not found!
SERVD: event [INFSVCS.LAN-1.UP/default]
SERVD: event [STATUS.READY/default]
SERVD: stop service [INFSVCS.LAN-2]
SERVD: service [INFSVCS.LAN-2] is already stopped.
SERVD: start service [INFSVCS.LAN-2]
SERVD: event [LAN-2.CONNECTED] not found!
SERVD: event [INFSVCS.LAN-2.UP] not found!
SERVD: stop service [INFSVCS.WAN-3]
SERVD: service [INFSVCS.WAN-3] is already stopped.
SERVD: start service [INFSVCS.WAN-3]
SERVD: event [WAN-3.CONNECTED] not found!
[bw_detect main.c main 977] auto detection flag is not enabled
SERVD: event [UPDATERESOLV/default]
SERVD: event [INFSVCS.WAN-3.UP] not found!
SERVD: event [UPNP.IGD.NOTIFY.WANIPCONN1] not found!
SERVD: stop service [WIFI_AP2G]
SERVD: service [WIFI_AP2G] is already stopped.
SERVD: start service [WIFI_AP2G]
$wlanmode=bgn
$puren=0
$pureg=0
$chmode=11NGHT20
params=BANDMODE=2G;CH_MODE=11NGHT20;PUREN=0;PUREG=0;AP_HIDESSID=0;
 AP_WMM=1;RF=RF;PRI_CH=0;BEACONINT=100;ATH_NAME=ath0;R_SHORTGI=1;
makeVAPcmd=/etc/ath/makeVAP ap "WesternDigital" "BANDMODE=2G;
 CH_MODE=11NGHT20;PUREN=0;PUREG=0;AP_HIDESSID=0;AP_WMM=1;RF=RF;
 PRI_CH=0;BEACONINT=100;ATH_NAME=ath0;R_SHORTGI=1;"
detection failed ...
/etc/ath/makeVAP ap WesternDigital BANDMODE=2G;CH_MODE=11NGHT20;
 PUREN=0;PUREG=0;AP_HIDESSID=0;AP_WMM=1;RF=RF;PRI_CH=0;
 BEACONINT=100;ATH_NAME=ath0;R_SHORTGI=1;
bandmode =2G
ssid =
wlanmode =11NGHT20
chan_bw =
channel =0
hidessid =0
wmm =1
puren =0
pureg =0
rf =RF
ATH_NAME =ath0
Creating ap for WesternDigital on
wlan_vap_create : enter. devhandle=0x86c782c0, opmode=IEEE80211_M_HOSTAP, flags=0x1
wlan_vap_create : exit. devhandle=0x86c782c0, opmode=IEEE80211_M_HOSTAP, flags=0x1.
VAP device ath0 created
Added ath0 mode master

 DES SSID SET=WesternDigital
 ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1
Created ath0 mode ap for WesternDigital
device ath0 entered promiscuous mode
br0: port 2(ath0) entering forwarding state
/usr/sbin/updatewifistats doesn't exist

SERVD: event [WPS.SUCCESS/default]
SERVD: event [WLAN.CONNECTED/default]
Reading topology file /var/topol ieee80211_ioctl_siwmode: 
 imr.ifm_active=393856, new mode=3, valid=1
ogy.conf ...
he
 DES SSID SET=WesternDigital
ndry : 1
madwifi_init: Initiating madwifi_wireless_event_init...
Using interface ath0 with hwaddr 00:90:a9:a6:23:bb and ssid 'WesternDigital'
SERVD: stop service [WIFI_AP5G]
SERVD: service [WIFI_AP5G] is already stopped.
SERVD: start service [WIFI_AP5G]
$wlanmode=an
$puren=0
$pureg=0
$chmode=11NAHT40
params=BANDMODE=5G;CH_MODE=11NAHT40;PUREN=0;PUREG=0;AP_HIDESSID=0;
 AP_WMM=1;RF=RF;PRI_CH=0;BEACONINT=100;ATH_NAME=ath2;R_SHORTGI=1;
makeVAPcmd=/etc/ath/makeVAP ap "WesternDigital" "BANDMODE=5G;CH_MODE=11NAHT40;PUREN=0;
 PUREG=0;AP_HIDESSID=0;AP_WMM=1;RF=RF;PRI_CH=0;BEACONINT=100;ATH_NAME=ath2;R_SHORTGI=1;"
Signal 15 received - terminating
/etc/ath/makeVAP ap WesternDigital BANDMODE=5G;CH_MODE=11NAHT40;PUREN=0;PUREG=0;
 AP_HIDESSID=0;AP_WMM=1;RF=RF;PRI_CH=0;BEACONINT=100;ATH_NAME=ath2;R_SHORTGI=1;
bandmode =5G
ssid =
wlanmode =11NAHT40
chan_bw =
channel =0
hidessid =0
wmm =1
puren =0
pureg =0
rf =RF
ATH_NAME =ath2
Creating ap for WesternDigital on
wlan_vap_create : enter. devhandle=0x86f082c0, opmode=IEEE80211_M_HOSTAP, flags=0x1
wlan_vap_create : exit. devhandle=0x86f082c0, opmode=IEEE80211_M_HOSTAP, flags=0x1.
VAP device ath2 created
Added ath2 mode master

 DES SSID SET=WesternDigital
 ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1
Created ath2 mode ap for WesternDigital
device ath2 entered promiscuous mode
br0: port 3(ath2) entering forwarding state
/usr/sbin/updatewifistats doesn't exist

SERVD: event [WPS.SUCCESS/default]
SERVD: event [WLAN.CONNECTED/default]
Reading topology file /var/topol ieee80211_ioctl_siwmode: 
 imr.ifm_active=393856, new mode=3, valid=1
ogy.conf ...
he ieee80211_ioctl_siwmode: imr.ifm_active=328320, new mode=3, valid=1
ndry : 1
hendry
 DES SSID SET=WesternDigital
 : 1
madwifi_init: Initiating madwifi_wireless_event_init...
madwifi_init: Initiating madwifi_wireless_event_init...
Using interface ath0 with hwaddr 00:90:a9:a6:23:bb and ssid 'WesternDigital'
Using interface
 DES SSID SET=WesternDigital
ath2 with hwaddr 00:90:a9:a6:23:bd and ssid 'WesternDigital'
SERVD: start service [ENLAN]
ATHRS17:[az] PHY 0 disconnected from az state, disable LPI
ATHRS17:[az] Phy 0 is NOT linked
ATHRS17:[az] write MAC Xon-Xoff regs (Phy: 0)
ATHRS17:[az] PHY 1 disconnected from az state, disable LPI
ATHRS17:[az] Phy 1 is NOT linked
ATHRS17:[az] write MAC Xon-Xoff regs (Phy: 1)
ATHRS17:[az] PHY 2 disconnected from az state, disable LPI
ATHRS17:[az] Phy 2 is NOT linked
ATHRS17:[az] write MAC Xon-Xoff regs (Phy: 2)
ATHRS17:[az] PHY 3 disconnected from az state, disable LPI
ATHRS17:[az] Phy 3 is NOT linked
ATHRS17:[az] write MAC Xon-Xoff regs (Phy: 3)
SERVD: event [IPV6ENABLE/default]
SERVD: event [IPV6ENABLE/default]
SERVD: start service [HTTP.LAN-1]
SERVD: start service [UPNP.LAN-1]
SERVD: event [UPNP.ALIVE.LAN-1/default]
SERVD: start service [NAMERESOLV.LAN-1]
[/etc/scripts/upnp/NOTIFYAB.sh]: [ssdp:alive] [LAN-1] [br0] [192.168.1.1] [1800] [inet]...
! -f
SERVD: start service [DHCPS4.LAN-1]
SERVD: start service [DNS4.LAN-1]
SERVD: stop service [BWC.LAN-1]
SERVD: service [BWC.LAN-1] is already stopped.
SERVD: start service [BWC.LAN-1]
LAN-1 Start TrafSet fw policy from 0(SKB->mark only) to 4
 (CONNECTION->mark only plus Small packet enhance)
fic Control system ...
SERVD: start service [INET.LAN-3]
[/var/servd/INET.LAN-3_start.sh]: starting LAN-3...
LAN-3 a is link local interface.
SERVD: event [LAN-3.UP/default]
[/var/servd/INET.LAN-3_start.sh]: starting LAN-3 done !!!
SERVD: start service [ENLAN]
SERVD: service [ENLAN] is already started.
SERVD: start service [HTTP.LAN-2]
httpsetup: (LAN-2) not active.
SERVD: service [HTTP.LAN-2] return error 8.
SERVD: start service [DHCPS4.LAN-2]
SERVD: start service [DNS4.LAN-2]
SERVD: stop service [ROUTE.STATIC]
SERVD: service [ROUTE.STATIC] is already stopped.
SERVD: start service [ROUTE.STATIC]
SERVD: stop service [ROUTE.IPUNNUMBERED]
SERVD: service [ROUTE.IPUNNUMBERED] is already stopped.
SERVD: start service [ROUTE.IPUNNUMBERED]
SERVD: stop service [IPTOBF]
SERVD: service [IPTOBF] is already stopped.
SERVD: start service [IPTOBF]
SERVD: stop service [IPTDEFCHAIN]
SERVD: service [IPTDEFCHAIN] is already stopped.
SERVD: start service [IPTDEFCHAIN]
nf_conntrack_rtsp v0.6.21 loading
nf_conntrack_rtsp  port #0: 554
nf_conntrack_rtsp  port #1: 557
nf_nat_rtsp v0.6.21 loading
SERVD: stop service [LLD2]
SERVD: service [LLD2] is already stopped.
SERVD: start service [LLD2]
SERVD: stop service [FTP]
SERVD: service [FTP] is already stopped.
SERVD: start service [FTP]
FTP is disabled !
SERVD: stop service [ITUNES]
SERVD: service [ITUNES] is already stopped.
SERVD: start service [ITUNES]
itunes server need mounted device!
itunes server is disabled !
SERVD: stop service [SAMBA]
SERVD: service [SAMBA] is already stopped.
SERVD: start service [SAMBA]
SERVD: start service [HTTP.WAN-3]
httpsetup: (WAN-3) not active.
SERVD: service [HTTP.WAN-3] return error 8.
SERVD: stop service [IP6TDEFCHAIN]
SERVD: service [IP6TDEFCHAIN] is already stopped.
SERVD: start service [IP6TDEFCHAIN]
SERVD: stop service [ROUTE6.DYNAMIC]
SERVD: service [ROUTE6.DYNAMIC] is already stopped.
SERVD: start service [ROUTE6.DYNAMIC]
SERVD: stop service [ROUTE6.STATIC]
SERVD: service [ROUTE6.STATIC] is already stopped.
SERVD: start service [ROUTE6.STATIC]
SERVD: stop service [DEVICE.TIME]
SERVD: service [DEVICE.TIME] is already stopped.
SERVD: start service [DEVICE.TIME]
Run NTP client ...
SERVD: stop service [ROUTE.DYNAMIC]
SERVD: service [ROUTE.DYNAMIC] is already stopped.
SERVD: start service [ROUTE.DYNAMIC]
SERVD: service [ROUTE.DYNAMIC] return error 108.
SERVD: start service [DEVICE]
pool.ntp.org: Unknown host
NTP will run in 10 seconds!
rtlioc: not found
SERVD: stop service [MULTICAST]
SERVD: service [MULTICAST] is already stopped.
SERVD: start service [MULTICAST]
SERVD: stop service [DLNA]
SERVD: service [DLNA] is already stopped.
SERVD: start service [DLNA]
[/etc/scripts/igmpproxy_helper.sh] flush ...
DLNA service start !
DMS ERROR create root_dir: ./DMS/media failed!
General netInterface: [br0]
General netInterface: [br0]
============START OF CREATING VIRTUAL FOLDERS ALONG XML FILE
============END OF CREATING VIRTUAL FOLDERS ALONG XML FILE
DMS root directory : ./DMS/media
DMS config directory : ./xml
DMS description file name : dms_descr.xml
DMS upload function is supported!

========================================
NFLC SDK version 2.3.0
DMS_SMM  version 2.3.0.7879C
========================================
Enabled features:
----------------------------------------
XBox support
Subtitle support
Playlist
QOS support
JPEG_SM res creation
Upload [+UP+]
XML runtime generation
Search support
Child count
FIFO mechanism for storage adding and removing enabled
Parental guidance
========================================

SERVD: stop service [MDNSRESPONDER]
SERVD: service [MDNSRESPONDER] is already stopped.
SERVD: start service [MDNSRESPONDER]
mdnsresponder server start !
SERVD: stop service [HTTP]
SERVD: service [HTTP] is already stopped.
SERVD: start service [HTTP]
SERVD: event [HTTP.UP] not found!
SERVD: stop service [NAMERESOLV]
SERVD: service [NAMERESOLV] is already stopped.
SERVD: start service [NAMERESOLV]
SERVD: stop service [INFSVCS.LAN-3]
SERVD: service [INFSVCS.LAN-3] is already stopped.
SERVD: start service [INFSVCS.LAN-3]
SERVD: event [LAN-3.CONNECTED] not found!
SERVD: event [INFSVCS.LAN-3.UP] not found!
SERVD: stop service [DNS]
SERVD: service [DNS] is already stopped.
SERVD: start service [DNS]
killall: dnsmasq: no process killed
SERVD: stop service [IPT.WAN-3]
SERVD: start service [IPT.WAN-3]
SERVD: stop service [IPT.WAN-1]
SERVD: start service [IPT.WAN-1]
SERVD: start service [ENLAN]
SERVD: service [ENLAN] is already started.
SERVD: start service [HTTP.LAN-3]
SERVD: start service [UPNP.LAN-3]
SERVD: event [UPNP.ALIVE.LAN-3/default]
[/etc/scripts/upnp/NOTIFYAB.sh]: [ssdp:alive] [LAN-3] [br0] 
 [fe80::290:a9ff:fea6:23bb] [1800] [inet6]...
SERVD: start service [NAMERESOLV.LAN-3]
! -f
SERVD: stop service [ROUTE6.STATIC]
SERVD: start service [ROUTE6.STATIC]
SERVD: stop service [ROUTE6.DYNAMIC]
SERVD: start service [ROUTE6.DYNAMIC]
SERVD: stop service [IP6TOBF]
SERVD: service [IP6TOBF] is already stopped.
SERVD: start service [IP6TOBF]
ip6tables: No chain/target/match by that name.
ip6tables: No chain/target/match by that name.
ip6tables: No chain/target/match by that name.
ip6tables: No chain/target/match by that name.
ip6tables: No chain/target/match by that name.
SERVD: stop service [IP6TDEFCHAIN]
SERVD: start service [IP6TDEFCHAIN]
SERVD: stop service [ROUTE.DYNAMIC]
SERVD: service [ROUTE.DYNAMIC] is already stopped.
SERVD: start service [ROUTE.DYNAMIC]
SERVD: service [ROUTE.DYNAMIC] return error 108.
SERVD: stop service [LLD2]
SERVD: start service [LLD2]
SERVD: stop service [FTP]
FTP is disabled !
SERVD: start service [FTP]
FTP is disabled !
SERVD: stop service [ITUNES]
itunes server is disabled !
SERVD: start service [ITUNES]
itunes server need mounted device!
itunes server is disabled !
SERVD: stop service [SAMBA]
kill: cannot kill pid 3876: No such process
SERVD: start service [SAMBA]
SERVD: stop service [HTTP]
SERVD: event [HTTP.DOWN] not found!
SERVD: start service [HTTP]
startup_server:IPV6, is multicast
SERVD: event [HTTP.UP] not found!
SERVD: stop service [NAMERESOLV]
SERVD: start service [NAMERESOLV]
Run NTP client ...
pool.ntp.org: Unknown host
NTP will run in 10 seconds!
SERVD: stop service [DLNA]
DLNA service stop !
SERVD: start service [DLNA]
DLNA service start !
DMS ERROR create root_dir: ./DMS/media failed!
General netInterface: [br0]
General netInterface: [br0]
============START OF CREATING VIRTUAL FOLDERS ALONG XML FILE
============END OF CREATING VIRTUAL FOLDERS ALONG XML FILE
DMS root directory : ./DMS/media
DMS config directory : ./xml
DMS description file name : dms_descr.xml
DMS upload function is supported!

========================================
NFLC SDK version 2.3.0
DMS_SMM  version 2.3.0.7879C
========================================
Enabled features:
----------------------------------------
XBox support
Subtitle support
Playlist
QOS support
JPEG_SM res creation
Upload [+UP+]
XML runtime generation
Search support
Child count
FIFO mechanism for storage adding and removing enabled
Parental guidance
========================================

(WORKGROUP)(MYNETN750)
SMB Start (VMar 20 2012)
Run NTP client ...
pool.ntp.org: Unknown host
NTP will run in 10 seconds!

cat /proc/cmdline

# cat /proc/cmdline
console=ttyS0,115200 root=/dev/mtdblock0 rw mem=128m

cat /proc/cpuinfo

# cat /proc/cpuinfo
system type             : Atheros AR934x
processor               : 0
cpu model               : MIPS 74Kc V4.12
BogoMIPS                : 279.55
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : yes
hardware watchpoint     : yes, count: 4, address/irw mask: [0x0000, 0x0ff8, 0x0000, 0x0100]
ASEs implemented        : mips16 dsp
shadow register sets    : 1
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

cat /proc/mtd

# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 0099d000 00010000 "rootfs"
mtd1: 00f80000 00010000 "upgrade"
mtd2: 00010000 00010000 "devdata"
mtd3: 00010000 00010000 "devconf"
mtd4: 00010000 00010000 "radiocfg"
mtd5: 01000000 00010000 "flash"
mtd6: 00040000 00010000 "bootloader"
mtd7: 00010000 00010000 "bdcfg"
mtd8: 00010000 00010000 "devrev1"
mtd9: 00010000 00010000 "devrev2"
mtd10: 00020000 00010000 "devrev3"

lsmod

# lsmod
Module                  Size  Used by
nf_nat_pptp             2608  0
nf_conntrack_pptp       6064  1 nf_nat_pptp
nf_conntrack_proto_gre     4880  1 nf_conntrack_pptp
nf_nat_proto_gre        2064  1 nf_nat_pptp
nf_nat_rtsp             5552  0
nf_conntrack_rtsp       7344  1 nf_nat_rtsp
nf_nat_sip              8032  0
nf_conntrack_sip       19664  1 nf_nat_sip
nf_conntrack_ipsec_pass     7200  0
umac                  673472  0
ath_dev               227632  1 umac
ath_dfs                49264  1 ath_dev
ath_rate_atheros       38480  1 ath_dev
ath_hal               608352  3 umac,ath_dev,ath_dfs
adf                    14416  3 umac,ath_dev,ath_hal
asf                     9584  4 umac,ath_dev,ath_dfs,ath_hal
rebootm                 1776  0
athrs_gmac            155440  0
gpio                    4096  0
ufsd                  520672  0
NetUSB                195168  0
GPL_NetUSB              8016  1 NetUSB

ps

# ps
  PID USER       VSZ STAT COMMAND
    1 root       768 S    init
    2 root         0 SW<  [kthreadd]
    3 root         0 SW<  [ksoftirqd/0]
    4 root         0 SW<  [events/0]
    5 root         0 SW<  [khelper]
    8 root         0 SW<  [async/mgr]
   81 root         0 SW<  [kblockd/0]
   90 root         0 SW<  [khubd]
  112 root         0 SW   [pdflush]
  113 root         0 SW   [pdflush]
  114 root         0 SW<  [kswapd0]
  115 root         0 SW<  [nfsiod]
  116 root         0 SW<  [crypto/0]
  276 root         0 SW<  [mtdblockd]
  334 root         0 SW<  [rpciod/0]
  360 root         0 SW   [ telnetDBGD ]
  361 root         0 SW   [ acktelnetDBGD ]
  362 root         0 SW   [checkSBusTimeou]
  378 root       908 S <  udevd --daemon
  399 root      1620 S    xmldb -n wrgnd13_wd_av -t
  400 root       912 S    servd -d schedule_off
  543 root       864 S    logd -p notice
  544 root       840 S    klogd -p notice
  589 root       864 S    gpiod -w 4
  601 root       848 S    hd-idle -a sda -i 600
  681 root         0 SW<  [napt_ct_scan]
  838 root       884 S    ddnsd
  896 root       892 R    -/bin/sh
 1030 root         0 SW   [NU UDP]
 1031 root         0 SW   [NU TCP]
 1145 root       848 S    portt -c DNAT.PORTT
 1575 root      1056 S    udhcpc -i eth0.2 -H MyNetN750 -p /var/servd/WAN-1-udh
 2669 root      1528 S    hostapd /var/topology.conf
 3471 root      1216 S    mDNSResponderPosix -b -i br0 -e WDRouter -f /var/rend
 3817 root       976 S    lld2d -c /var/lld2d.conf br0 ath0
 3897 root       868 S    /bin/sh /etc/services/SAMBA_loop.sh
 3905 root       604 S    KC_SMB
 3955 root      1520 S    httpd -f /var/run/httpd.conf
 3980 root       864 S    nameresolv -n -l -i br0 -r MyNetN750 -r WDRouter
 4024 root      4404 S    ./dms_smm
 4027 root      4404 S    ./dms_smm
 4028 root      4404 S    ./dms_smm
 4029 root       604 S    KC_SMB
 4030 root       604 S    KC_SMB
 4031 root       604 S    KC_SMB
 4039 root       604 S    KC_SMB
 4040 root       604 S    KC_SMB
 5460 root      1080 S    udhcpd /var/servd/LAN-1-udhcpd.conf
 5507 root      1080 S    udhcpd /var/servd/LAN-2-udhcpd.conf
 5694 root       944 S    igmpproxy -c /var/run/igmpproxy.conf -s /etc/scripts/
 5769 root      1000 S    dnsmasq -C /var/servd/DNS.conf
 6082 root       772 R    ps

iwconfig

# iwconfig
lo        no wireless extensions.
sit0      no wireless extensions.
ip6tnl0   no wireless extensions.
eth0      no wireless extensions.
wifi0     no wireless extensions.
wifi1     no wireless extensions.
eth0.1    no wireless extensions.
eth0.2    no wireless extensions.
br0       no wireless extensions.
br1       no wireless extensions.

ath0      IEEE 802.11ng  ESSID:"WesternDigital"
          Mode:Master  Frequency:2.437 GHz  Access Point: 00:90:A9:A6:23:BB
          Bit Rate:144.4 Mb/s   Tx-Power:21 dBm
          RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=94/94  Signal level=-96 dBm  Noise level=-95 dBm
          Rx invalid nwid:9982  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

ath2      IEEE 802.11na  ESSID:"WesternDigital"
          Mode:Master  Frequency:5.22 GHz  Access Point: 00:90:A9:A6:23:BD
          Bit Rate:450 Mb/s   Tx-Power:17 dBm
          RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=94/94  Signal level=-96 dBm  Noise level=-95 dBm
          Rx invalid nwid:40  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

cat /proc/bus/usb/devices

# cat /proc/bus/usb/devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  1, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 2.06
S:  Manufacturer=Linux 2.6.31--LSDK-9.2.0_U8.834-svn2231 ehci_hcd
S:  Product=ATH EHCI
S:  SerialNumber=platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=05e3 ProdID=0608 Rev=32.98
S:  Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

ls /lib

# ls /lib
xtables              libresolv.so.0       libip4tc.so
out-daap.so          libresolv.so         libid3tag.so.0.2.0
modules              libpthread.so.0      libid3tag.so.0
libxtables.so.4.0.0  libpthread.so        libid3tag.so
libxtables.so.4      libnsl.so.0          libid3tag.la
libxtables.so        libnsl.so            libiconv.so.2.2.0
libxtables.la        libm.so.0            libiconv.so.2
libwpa_ctrl.so       libm.so              libgdbm.so.3
libwpa_common.so     libjson.so.0.0.1     libgcc_s.so.1
libutil.so.0         libjson.so.0         libgcc_s.so
libutil.so           libjson.so           libdl.so.0
libstdc++.so.6.0.10  libiptc.so.0.0.0     libdl.so
libstdc++.so.6       libiptc.so.0         libcrypto.so
libssl.so            libiptc.so           libcrypt.so.0
libsqlite3.so.0.8.6  libip6tc.so.0.0.0    libcrypt.so
libsqlite3.so.0      libip6tc.so.0        libc.so.0
libsqlite3.so        libip6tc.so          libc.so
librt.so.0           libip4tc.so.0.0.0    ld-uClibc.so.0
librt.so             libip4tc.so.0

busybox

# busybox
BusyBox v1.14.1 (2012-03-29 22:49:59 CST) multi-call binary
Copyright (C) 1998-2008 Erik Andersen, Rob Landley, Denys Vlasenko
and others. Licensed under GPLv2.
See source distribution for full notice.

Usage: busybox [function] [arguments]...
   or: function [arguments]...

        BusyBox is a multi-call binary that combines many common Unix
        utilities into a single executable.  Most people will create a
        link to busybox for each function they wish to use and BusyBox
        will act like whatever it was invoked as!

Currently defined functions:
        [, [[, addgroup, adduser, arp, awk, basename, bunzip2, bzcat, bzip2,
        cat, chmod, chpasswd, cp, cryptpw, cut, date, dd, delgroup, deluser,
        devmem, df, du, echo, egrep, eject, expr, false, fdisk, fgrep, find,
        free, grep, gunzip, gzip, hostname, id, ifconfig, init, insmod, ip,
        ipaddr, iplink, iproute, iprule, iptunnel, kill, killall, killall5,
        ln, ls, lsmod, mkdir, mknod, mkpasswd, mkswap, modprobe, mount, msh,
        mv, netstat, nice, passwd, pidof, ping, ping6, ps, pwd, renice, rm,
        rmdir, rmmod, route, sed, sh, sleep, swapoff, swapon, sync, sysctl,
        tar, test, tftp, top, touch, tr, true, tunctl, umount, uname, uptime,
        vconfig, vi, wc, wget, xargs, yes, zcat

Misc. info

The PCI ID of the on-board AR9380 is 168c:0030 (168c:a120)

Images