WikiDevi.Wi-Cat.RU:DD-WRT/External SSH
Jump to navigation
Jump to search
Ensure SSH Enabled
- Goto the Services tab and the Services sub-tab on the Web Interface
- Enable "SSHd" is under the section titled "Secure Shell"
- 'SSH TCP Forwarding' does not need to be enabled if you just want to connect from the outside to your LAN.
- Choose an appropriate port (The default is 22, but it is recommended that you change it to a non-standard port above 1024 for security reasons. Remember the port number, as you will need to enter it into your SSH client in order to connect to the router)
- You can activate (less secure) password authorization and/or (recommended) private/public key authorization. More information about generating the keys can be found here: Setting Up SSH.
- Save
Enable Remote Access
- Goto the Administration tab and the Management sub-tab on the Web Interface
- Enable "SSH Management" under the section titled "Remote Access"
- Enter the same port number as specified under (4) above. This opens the port in the firewall.
- Save
- Reboot Router
Now you will be able to connect to your router's WAN IP from the internet using an SSH client such as PuTTY.
Disabling Remote Access
If at any time you wish to disable SSH access from the WAN,
- Goto the Administration tab and the Management sub-tab on the Web Interface
- Disable "SSH Management" under the section titled "Remote Access"
- Apply Settings
SSH Password
- When asked for the username, enter root (even if you changed username in web interface)
- When asked for the password, enter your router's password
