WikiDevi.Wi-Cat.RU:Tomato/File Versions
Scorce: http://tomatousb.org/doc:build-types
TomatoUSB Build Types
Editions
The Tomato USB mod comes in several different editions:
- Standard: most basic features; ~300KB JFFS space (5 blocks) available on 4MB flash routers;
- Extras: all features of Standard plus built-in NTFS support (starting from build 36), included Linux Ext2/Ext3 and FAT32 filesystem utilities (fdisk, e2fsck, mke2fs, mkswap, mkdosfs), built-in loop device support, some extra Linux commands not included in other builds, and additional color schemes. ~120KB JFFS space (2 blocks) available on 4MB flash. This version is for people who don't really need JFFS space, or have 8+ MB flash routers, and would like to be able to partition/format drives in Linux native Ext2/Ext3 format or in FAT32 format directly on the router without installing any additional tools.
- Lite: all features of Standard but no Samba; some very minor features are stripped out of Busybox, about 600KB JFFS space (10 blocks) available on 4MB flash routers;
- No CIFS: all features of Standard but no CIFS Network filesystem support, about 420KB JFFS space (7 blocks) available on 4MB flash routers;
- VPN: Extras edition merged with SgtPepperKSU' VPN build with Web GUI (no JFFS space left on 4MB flash).
- No USB: Initially this was the USB mod… However, it grew up to be an "extended" version of Tomato even without USB support, so starting from build 36 Tomato USB includes non-USB edition (ND only) for routers with no USB ports. This build has about 900KB of JFFS space (15 blocks) available on 4MB flash routers.
Kernels
Since January 2010, Tomato USB also experimentally supports Kernel 2.6, in addition to the standard Kernel 2.4 builds. The K26 support is required for newer routers where Broadcom never released a 2.4 wifi driver. For older routers, you can choose between the K24 builds or the K26 builds.
K26 builds are of two different types: MIPSR2 builds (for newer CPUs) and MIPSR1 (for older CPUs). You must download the correct version given your router.
Naming convention
Tomato USB firmware builds are named according to the following specification: tomato-<VER>-<ND|K26>[USB]-<NNNN>[MIPSR2|MIPSR1][-subver]-[EDITION].trx
- <VER> - Tomato base version (i.e. 1.27)
- <ND|K26> - indicates the platform:
- o ND - Tomato ND ("new driver") builds based on kernel 2.4
- o K26 - Tomato builds based on kernel 2.6 (assumes ND)
- [USB] - optional indicator of built-in USB support
- <NNNN> - build number, i.e. 9043
- <MIPSR2|MIPSR1> - architecture:
- o MIPSR2 is for MIPS32 Release 2 CPUs
- o MIPSR1 is for all other MIPS CPUs (MIPS32 Release 1)
- o Kernel 2.4-based builds are always MIPSR1, and currently are not compatible with MIPSR2 routers
- [-subver] - optional subversion number, e.g. -beta02
- [EDITION] - the build edition, e.g. Ext (Extras), VPN (OpenVPN) etc.
Compatibility table
Tomato builds based on kernel 2.4 are known to work on the following Broadcom-based routers (from the official Tomato web site, with an addition of a few models supported by Tomato USB):
- Linksys WRT54G v1-v4, WRT54GS v1-v4, WRT54GL v1.x, WRTSL54GS, WRT300N v1, WRT310N v1
- Buffalo WHR-G54S, WHR-HP-G54, WZR-G54, WBR2-G54, WBR-G54, WZR-HP-G54, WZR-RS-G54, WZR-RS-G54HP, WVR-G54-NF, WHR2-A54-G54, WHR3-AG54
- Asus WL500GP v1/v2, WL500GE, WL520GU, WL-500W
- Sparklan WX6615GT, Fuji RT390W, Microsoft MN-700
- D-Link DIR-320, ZTE ZXV10 H618B
Chart
The table below shows the availability for each router compatible with kernel 2.6 builds:
Router | CPU | K26 RT-N | K26 RT | K24 | Editions |
Asus RT-N10 | R2 | Yes | No | No | Only shibby-RT-N |
Asus RT-N12 | R2 | No | Yes | No | NoUSB |
Asus RT-N16 | R2 | No | Yes | No | All |
Asus RT-N66U vB1 | R2 | Yes | No | No | Only All-shibby-RT-N |
Asus WL500GP v1/v2 | R1 | No | Yes | Yes | All |
Asus WL500W | R1 | No | Yes | Yes | All |
Asus WL500G Deluxe | R1 | No | Yes | Yes | All |
Asus WL520GU | R1 | No | Yes | Yes | Lite or NoUSB-Std (4Mb flash) only |
Buffalo WHR-G54S | R1 | No | Yes | Yes | NoUSB-Std (4Mb flash) only |
Buffalo WHR-HP-G54 | R1 | No | Yes | Yes | NoUSB-Std (4Mb flash) only |
D-Link DIR-320 | R1 | No | Yes | Yes | NoUSB-Std (4Mb flash) only |
Linksys E2000 | R2 | No | Yes | No | E2000 (special E2000 Std build required) |
Linksys E3000 | R2 | No | Yes | No | E3000 (special E3000 Ext or VPN build required) |
Linksys WRT160N v1 | R1 | No | Yes | Yes | NoUSB-Std (4Mb flash) only |
Linksys WRT160N v3 | R2 | No | Yes | No | NoUSB-Std (4Mb flash) only |
Linksys WRT300N v1 | R1 | No | Yes | Yes | NoUSB-Std (4Mb flash) only |
Linksys WRT310N v1 | R1 | No | Yes | Yes | NoUSB-Std (4Mb flash) only |
Linksys WRT310N v2 | R2 | No | Yes | No | NoUSB-Std (4Mb flash) only (same as WRT160N v3) |
Linksys WRT320N | R2 | No | Yes | No | NoUSB |
Linksys WRT54G-TM | R1 | No | Yes | Yes | All |
Linksys WRT54-GL,-GS v1-v4 | R1 | No | Yes | Yes | NoUSB-Std (4Mb flash) only |
Linksys WRTSL54GS | R1 | No | Yes | Yes | All |
Linksys WRT610N v2 | R2 | No | Yes | No | All |
Netgear WNR2000 v2 | R2 | No | Yes | No | NoUSB-Mini |
Netgear WNR3500L | R2 | No | Yes | No | All |
Netgear WNR3500 v2/U | R2 | No | Yes | No | NoUSB-Mini |
Ovislink WL1600GL | R1 | No | Yes | Yes | All |
ZTE ZXV10 H618B | R1 | No | Yes | Yes | All |
The table above only includes models that have been reported to work properly with Tomato USB. Most of the other models supported by Tomato kernel 2.4 builds should be compatible with kernel 2.6 builds as well but have not been tested yet.