Xircom APWE1120
Xircom APWE1120
Manuf (OEM/ODM): Gemtek
FCC approval date: 27 March 2001
Country of manuf.: Taiwan
Type: access point
FCC ID: MXF-WX1560
Power: 5 VDC, 1 A
Connector type: barrel
Conn. measurements: 5 mm (OD), 2 mm (ID), 10 mm (LEN)
CPU1: No Wires Needed Poldhu
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Atmel AT49BV1614T)
RAM1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (EliteMT M12L16161A × 2)
Expansion IFs: none specified
WI1 chip1: No Wires Needed Poldhu
WI1 chip2: Intersil HFA3861
WI1 chip3: Intersil HFA3683
WI1 802dot11 protocols: b
WI1 antenna connector: none
ETH chip1: No Wires Needed Poldhu
ETH chip2: Lucent Model?
LAN speed: 100M
LAN ports: 1
b
Default SSID: default (99 addl. devices)
Default IP address: 169.254.107.28
| FCC ID | |
|---|---|
| Gemtek WX-1560 | MXF-WX1560 |
For a list of all currently documented No Wires Needed (NWN) chipsets with specifications, see No Wires Needed.
By default, the access point will attempt to use DHCP to obtain an IP address. If it fails it will assume the IP of 169.254.107.28. The AP does have a web configuration interface.
The power adapter included with the device is a Delta ADP-10SB REV: H (5V, 2A). ID/OD/Len measurements are approximate.
