ZBT WE1326
ZBT WE1326
Availability: new
FCC approval date: 23 May 2018
(Est.) release date: 2016
Country of manuf.: China
Type: wireless router
FCC ID: 2AC47-ZBT-WE1326
Power: 12 VDC, 2 A
Connector type: barrel
CPU1: MediaTek MT7621AT (880 MHz, 2 cores)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond W25Q128FVSG)
RAM1: 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (EtronTech EM6GE16EWXD-12H)
Expansion IFs: USB 2.0, Mini PCIe, Micro SD card slot
Mini PCIe slots: 1
USB ports: 1
JTAG: yes
Serial: yes, 4-pin header, internal, (57600,8,N,1), J4
WI1 chip1: MediaTek MT7612EN
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 2x2:2
WI1 antenna connector: SMA
WI2 chip1: MediaTek MT7603EN
WI2 802dot11 protocols: bgn
WI2 MIMO config: 2x2:2
WI2 antenna connector: RP-SMA
ETH chip1: MediaTek MT7621AT
Switch: MediaTek MT7621AT
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1
abgn+ac
Stock bootloader: U-Boot
Stock FW OS: Linux 3.10.14 Ralink SDK
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 3 are ZBT devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 2 are ZBT devices
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
AC1200 Wireless Gigabit Router
"ZBT-WE1326 V02" is silkscreened on the board in the FCC photos.
A Family Models Letter at the FCC claims that the following model names all use the same circuit and RF module.
- ZBT-WE1326, ZBT-WE1026-5G,ZBT-WE3526, ZBT-WE826-Q, ZBT-APG521,
- ZBT-APG721, ZBT-WE4626, ZBT-APG621, ZBT-WE4726, ZBT-WD223
Hardware
- CPU: MediaTek MT7621AT @880MHz Dual Core
- Flash: SPI 16MB (max 32MB)/NAND (no populated)
- RAM: DDR3 512MB (max 512MB)| HW:V5 DDR3 256MB
Product features
- ♦ Support 802.11abgn/ac network protocol (2.4/5 GHz)
- max transmission rate could be 1200Mbps (300+867 Mbps)
- ♦ 5x 10/100/1000Mbps (Auto MDI/MDIX), support 802.3u protocol,
- ♦ 1x USB 2.0 ports, 1x Micro SD Card Slot, 1x SIM Card Slot
- ♦ Supports 3G/4G (an option, w/o Mini PCIe 3G/4G module),
- ♦ 802.11ac dual band (an option, w/o Mini PCIe 5GHz module)
- ♦ The HW version V5 has only 256MB memory
Note: There are NO HEATSINKS installed by default,
- PCB photo with heatsinks below is a MODDED state.
Images
Exterior
Other side
Ports and antennas
Antennas location and connection
PCB top
PCB bottom
Front panel
Main board
