ZBT WE826
ZBT WE826 B0
Availability: new
FCC approval date: 18 May 2016
(Est.) initial retail price (in USD): $25
Country of manuf.: China
Type: wireless router, mobile router
FCC ID: 2AH9TW826
Power: 12 VDC, 2 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID), 9.5 mm (LEN)
CPU1: MediaTek MT7620A (580 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond W25Q128FVSIG)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Winbond W971GG6KB-25)
Expansion IFs: USB 2.0, Mini PCIe, Micro SD card slot
Mini PCIe slots: 1
USB ports: 1
Serial: yes, debug
WI1 chip1: MediaTek MT7620A
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 module: ZBT WN2522
WI2 module IF: Mini PCIe
WI2 chip1: MediaTek MT7612EN
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL
ETH chip1: MediaTek MT7620A
Switch: MediaTek MT7620A
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
abgn+ac
Stock bootloader: U-Boot 1.1.3 Ralink UBoot
Stock FW OS: Linux 3.10.14 OpenWrt (Mediatek SDK)
TPFirmware supported: OpenWrt • (List | Dev | DLs), LEDE Project (obsolete, OpenWrt) • (List), Padavan (unofficially)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 3 are ZBT devices
Default login user: root
Default login password: blank
root:blank credentials used by 65 additional devices
of which 0 are ZBT devices
802dot11 OUI: none specified
| FCC ID | |
|---|---|
| Lippert WE826-T | XNI-IDS23004 XMR201605EC25A 2AH9TW826 |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
N300/AC1200 Wireless Router
"ZBT-WE826_B0" and "ZBT-WN2522" is silkscreened on the board.
Note: Original device is coming with empty mpci-e slot but can be supplied with MT7612E
- radio card or 3G/4G modem card (SIM card slot soldered on PCB bottom).
Key features
- CPU: MediaTek MT7620A @580MHz (RevID: 0206)
- RAM: 128MB (DDR2), Flash: 16MB (SPI NOR)
- 2.4GHz Wi-Fi (supports 802.11bgn, up to 300Mbps)
- Optional 5GHz Wi-Fi (supports 802.11abgn/ac, up to 867Mbps)
- 1x USB 2.0, 1x microSD, 1x Mini PCIe
- 4-pins serial debug port header
Hardware mods
- This board uses FE1.1s USB 2.0 HUB (4 ports) chip providing
- front USB port and MiniPCIe usb interface (for 3G/4G modem).
- 2 other ports are free and can be used for hardware mods.
See also
- ZBT WE126 MediaTek MT7620N @580MHz
- Flash: 8MB, RAM: 64MB, USB 2.0, 2.4GHz, 802.11bgn 2T2R, 5x FE
- ZBT WE526 MediaTek MT7620N @580MHz
- Flash: 8MB, RAM: 64MB, 2.4GHz, 802.11bgn 2T2R, 5x FE
- ZBT WE826T MediaTek MT7620A @580MHz
- Flash: 16MB, RAM: 128MB, USB 2.0, 2.4MHz, 802.11bgn 2T2R, 5x FE, 3G/4G
- ZBT WE1026 MediaTek MT7620A @580MHz
- Flash: 16MB, RAM: 128MB, USB 2.0, 2.4MHz, 802.11bgn 2T2R, 5x FE
- ZBT WE1426 MediaTek MT7620N @580MHz
- Flash: 4MB, RAM: 32MB, 2.4GHz, 802.11bgn 2T2R, 5x FE
- ZBT WE1626 MediaTek MT7620N @580MHz
- Flash: 8MB, RAM: 64MB, 2.4GHz, 802.11bgn 2T2R, 5x FE
- ZBT WE1826 MediaTek MT7620A @580MHz
- Flash: 16MB, RAM: 128MB, USB 2.0, 2.4/5GHz, 802.11abgn/ac 2T2R, 5x FE
- ZBT WE2026 MediaTek MT7620N @580MHz
- Flash: 8MB, RAM: 64MB, 2.4GHz, 802.11bgn 2T2R, 5x FE
- ZBT WG2626 MediaTek MT7621AT @880MHz
- Flash: 16MB, RAM: 512MB, USB 3.0, 802.11abgn/ac 2T2R, 5x GbE
- ZBT WG2926 MediaTek MT7621AT @880MHz
- Flash: 16MB, RAM: 512MB, USB 3.0, SATA, 802.11abgn/ac 2T2R, 5x GbE
Images
Board top
Board bottom
With 5G MT7612E card installed
5G card close
