ZIO X11
ZIO X11 A
Availability: Korea only
Manuf (OEM/ODM): Netcore
(Est.) release date: July 2007
Country of manuf.: China
Type: wireless router
Power: 9 VDC, 0.7 A
Connector type: barrel
CPU1: Marvell 88W8510
FLA1: 512 KiB 0.5 MiB <br />524,288 B <br />4,096 Kib <br />4 Mib <br />4.882812e-4 GiB <br /> (KH KH29LV400CBTC-70G)
RAM1: 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (EtronTech EM636165TS-6G)
Expansion IFs: none specified
Serial: yes, internal, 5-pin header, unpopulated, 3.3V TTL, (38400,8,N,1), J8
WI1 chip1: Marvell 88W8510
WI1 chip2: Marvell Model?
WI1 802dot11 protocols: bg
WI1 antenna connector: RP-SMA
ETH chip1: Marvell 88W8510
Switch: Marvell 88E6060
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bg
Stock FW OS: eCos
Default SSID: ZIO
Default IP address: 192.168.10.1
the IP 192.168.10.1 is used by 123 additional devices
of which 2 are ZIO devices
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
Wireless G High Speed Broadband Router
"PB-862-M04F-30-GP", "MAY 25 2005", and a date code of 0728 (July 2007) is silkscreened on the board.
- The board is using mostly Fcon branded radial capacitors.. though there are two CA <???> branded capacitors on the power side.
Serial
Pinout
^ to 88W8510 (GND) (TxD) J8 ( ) (RxD) (GND)
Boot log
down port 0x0 value 0x3800 down port 0x1 value 0x3800 down port 0x2 value 0x3800 down port 0x3 value 0x3800 down port 0x4 value 0x3800 state.Probs = 0xD03BC190 state.Probs = 0xD03BC190 state.Probs = 0xD03BC190 state.Probs = 0xD03BC190 ARM eCos Loading Run Parameters... Parameters Are Blank! Loading Default Parameters... create socket success setsocket socket success bind socket success
