ZTE ZXDSL 931WII V1

ZTE ZXDSL 931WII V1

FCC approval date: 17 February 2011
Country of manuf.: China

Type: dsl modem, wireless router

Power: 12 VDC, 1 A
Connector type: barrel

CPU1: Broadcom BCM6368U (400 MHz)
FLA1: 4 MiB4,194,304 B 32,768 Kib 4,096 KiB 32 Mib 0.00391 GiB  (Spansion S29GL032N90TFI04)
RAM1: 64 MiB67,108,864 B 524,288 Kib 65,536 KiB 512 Mib 0.0625 GiB  (ESMT M13S2561616A-5T × 2)

Expansion IFs: none specified
Serial: yes

WI1 chip1: Broadcom BCM4318
WI1 802dot11 protocols: bg
WI1 antenna connector: none

ETH chip1: Broadcom BCM6368U
Switch: Broadcom BCM6368U
LAN speed: 100M
LAN ports: 4

bg

Flags: ADSL2+, VDSL2

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1298 additional devices
of which 10 are ZTE devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1322 additional devices
of which 8 are ZTE devices

802dot11 OUI: none specified

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

xDSL CPE

Product page

Features

Providing 4x 10/100 Base-T Ethernet interface
Supporting Bridge and Router mode
High reliability, simple operation and low power consumption
ITU-T G.992.1/ G.992.3/ G.992.5 ADSL/ADSL2/ADS2+
ITU-T G.993.2 VDSL2 standard

This device have many good functions, such as 802,1q, L2 management switch

and VDSL2 support up to 100Mbit/s downstream to 60Mbit/s Upstream.

Device based on broadcom BCM6368 V3.1 chip.

Hardware Highlights

SoC	Ram	Flash	Ethernet	Wireless	Modem	USB	Serial	JTag
Broadcom BCM6368U @400MHz	64 MiB	4 MiB	4 x 100	Broadcom BCM4318 802.11a/b/g	xDSL	No	Yes	?

ZTE ZXDSL 931WII V1 on OpenWrt wiki

Forum threads

How to connect to the Serial Port of this specific device.

Buttons

The ZTE ZXDSL 931WII has four buttons. They are Power ON/OFF,WPS,Reset and WLAN ON/OFF.

Photos

Photos ZXDSL 931WII

Images

Opening the case - Main PCB

Front
Back
Main SoC + RAM + Serial
Wireless SoC + WLAN RF FEM
Flash