ZyXEL NBG5615

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

ZyXEL NBG5615 v1

Manuf (OEM/ODM): AMIT

FCC approval date: 24 April 2013
Country of manuf.: China

Type: wireless router

FCC ID: I88NBG5615

Power: 12 VDC, 2 A
Connector type: barrel

CPU1: Ralink RT6856 (700 MHz)
FLA1: 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Macronix MX25L12845EMI-10G)
RAM1: 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Winbond W971GG6JB-25)

Expansion IFs: USB 2.0
USB ports: 2

WI1 chip1: Ralink RT3593
WI1 802dot11 protocols: an
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL
WI2 chip1: Ralink RT5392
WI2 802dot11 protocols: bgn
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL

ETH chip1: Ralink RT6856
Switch: Realtek RTL8367RB
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1

abgn

Additional chips
5GHz Power Amplifier IC;Skyworks;SE5003L1;;3;

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 96 are ZyXEL devices
Default login user: blank
Default login password: 1234
blank:1234 credentials used by 48 additional devices
of which 46 are ZyXEL devices

802dot11 OUI: none specified

For a list of all currently documented Ralink chipsets with specifications, see Ralink.


Simultaneous Dual-Band Wireless N750 Media Router

The FCC internal photos are of pretty low quality.. but this device is presumed to use RT6856.

Additional models of...

  • EMG2626-R10A
  • Keenetic Ultra

are specified in the FCC test report.

Default settings are per the FCC manual.

The default IP for AP mode is specified as 192.168.1.2.
The default SSIDs may follow the pattern of ZyXELXXXXXX where XXXXXX is the last 3 octets of the respective interface's MAC address (upper case letters).

Additional external links

128 MB RAM noted
MX25L12845EMI-10G (16 MB) noted as Flash, W971GG6JB-25 (128 MB) noted as RAM, RTL8367RB noted as the GbE Switch, SE5003L noted as 5GHz PAs