ZyXEL NWA1100-N
ZyXEL NWA1100-N
Manuf (OEM/ODM): Z-Com
Type: access point
FCC ID: I88NWA1100N
Power: 12 VDC, 1.5 A
Connector type: barrel
PoE tag: 802.3af, standard
CPU1: Atheros AR7242 (400 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Winbond W25Q64BVSFIG)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Winbond W9751G6JB-25)
Expansion IFs: none specified
Serial: yes, 3.3V TTL, internal, 4-pin header, 3.3V TTL
WI1 chip1: Atheros AR9283
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL, RP-SMA
ETH chip1: Atheros AR7242
ETH chip2: Atheros AR8035-A
LAN speed: 1G
LAN ports: 1
bgn
Additional chips
2.4GHz Power Amplifier IC;Skyworks;SE2576L;SiGe, 2576L, 013AX;2;
Default IP address: 192.168.1.2
the IP 192.168.1.2 is used by 33 additional devices
of which 18 are ZyXEL devices
Default login user: blank
Default login password: 1234
blank:1234 credentials used by 48 additional devices
of which 46 are ZyXEL devices
802dot11 OUI: none specified
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
802.11b/g/n PoE Access Point
"70-A01526-03N" and some other stuff is silkscreened on the board in the FCC photos.
The GbE PHY used is presumed to be an AR8035-A.
Probably used PSU(s)
The FCC docs show the device w/ two different PSUs -
a DVE DSA-20CA-12 120150 and a PHIHONG PSA18R-120P.
DVE DSA-20CA-12 120150 (more) | |||||
---|---|---|---|---|---|
Input: 120-240 VAC ~ 50/60 Hz, 0.8 A | |||||
Input connector: NEMA 1-15P Style: large, vertical Manuf. in: China Eff. level: 3 | |||||
Output: 12 VDC, 1.5 A | |||||
Output connector: barrel (center +) OD: ?? ID: ?? LEN: ?? |
PHIHONG PSA18R-120P (more) | |||||
---|---|---|---|---|---|
Input: 120-240 VAC ~ 50/60 Hz, 0.5 A | |||||
Input connector: NEMA 1-15P Style: large, vertical Manuf. in: China Eff. level: 5 | |||||
Output: 12 VDC, 1.5 A | |||||
Output connector: barrel (center +) OD: ?? ID: ?? LEN: ?? |