ZyXEL P-2812HNU-F1
ZyXEL P-2812HNU -F1
Manuf (OEM/ODM): MitraStar
(Est.) release date: August 2012
Type: wireless router, dsl modem, analog phone gateway
Power: 12 VDC, 2 A
Connector type: barrel
CPU1: Lantiq PSB 80920 (500 MHz)
FLA1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Samsung K9F1G08U0D-SCB0)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (ProMOS V59C1G01168QBJ25)
Expansion IFs: USB 2.0
USB ports: 2
Serial: yes, internal, 4-pin header, 3.3V TTL
WI1 chip1: Ralink RT3062
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
ETH chip1: Lantiq PSB 80920
Switch: Lantiq PSB 80920
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1
bgn
Additional chips
DSL (ADSL2+) AFE and LD;Lantiq;PSB 80190;Lantiq, XWAY VRX208, PSB 80190, V V1.1;1;
Single-Chip Dual Channel SLIC (2x FXS);Lantiq;PEF 42068;Lantiq, PEF 42068 F, V1.2, XWAY, SLIC120, UMSWWR5101, H1205;1;
Flags: VDSL2, ADSL2+
Default SSID: ZyXEL_XXXX (4 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 96 are ZyXEL devices
Default login user: admin
Default login password: 1234
admin:1234 credentials used by 185 additional devices
of which 66 are ZyXEL devices
802dot11 OUI: none specified
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
ZyXEL P-2812HNU-F1 | Lantiq | Ralink | |
ZyXEL P-2812HNU-F1 vT | Lantiq | Ralink | |
ZyXEL P-2812HNU-F3 | Lantiq | Ralink |
For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Wireless VDSL2 VoIP Combo WAN Router with 3G USB backup
The default SSID for these units would appear to be ZyXEL_ followed
- by the last 4 hex digits of the BSSID (upper case letters)
- CPU: PSB 80920, WLAN: RT3062F WiSoC 2.4GHz
- P-2812HNU-FX: getting OpenWrt installed on OpenWrt forums
- ZyXEL P-2812HNU-F1 Unbranding Process on OpenWrt forums