ZyXEL P-660HN-T1H
ZyXEL P-660HN -T1H
Availability: Turkey
Manuf (OEM/ODM): MitraStar
FCC approval date: 24 August 2010
(Est.) release date: December 2010
Country of manuf.: Taiwan
Series: P-660HN
Type: dsl modem, wireless router
FCC ID: I88P660HNT1H
PCB ID: 45-201-000581
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: TrendChip TC3162U (450 MHz)
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Macronix MX25L1606EM2I-12G)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond W9812G6JH-6)
Expansion IFs: none specified
WI1 chip1: Ralink RT3090L
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: soldered
ETH chip1: TrendChip TC3162U
Switch: TrendChip TC2206
LAN speed: 100M
LAN ports: 4
bgn
Additional chips
xDSL (ADSL2+) AFE;TrendChip;TC3086;TC3086-QFN64-EPG;1;
Flags: ADSL2+
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1305 additional devices
of which 96 are ZyXEL devices
Default login user: admin
Default login password: 1234
admin:1234 credentials used by 185 additional devices
of which 66 are ZyXEL devices
802dot11 OUI: none specified
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
ZyXEL P-660HN-T1A | TrendChip | Ralink | |
ZyXEL P-660HN-T1A v2 | TrendChip | Ralink | |
ZyXEL P-660HN-T1H | TrendChip | Ralink | |
ZyXEL P-660HN-T3A | TrendChip | Ralink |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented TrendChip chipsets with specifications, see TrendChip.
802.11n Wireless ADSL2+ with 4x FE ports Gateway
Recovery
This router doesn't come with a built-in CFE to flash the firmware.
- However there is a workaround for this, ftp.
To be able restore the firmware follow these steps:
$ ftp 192.168.1.1 Connected to 192.168.1.1 220 P-660HN-T1H FTP version 1.0 ready at Fri Jan 01 00:02:24 2010 Name (192.168.1.1:th): admin 331 Enter PASS comand Password: 1234 230 Logged in Remote system type is UNIX Using binary mode to transfer files. ftp> put image.bin image 200 Port command okay 150 Binary data connection established. WARNING:Itl will take some minutes writing flash. The modem will reboot itself after finishing writing flash. Don't reboot modem within 5 minutes. ftp: 4113021 bytes sent in 1.44Seconds 8262.23Kbytes/sec. ftp>