AIRETOS AEX-AR9590-NI
AIRETOS AEX-AR9590 -NI
Availability: now
(Est.) release date: 2013
(Est.) initial retail price (in USD): $69.95
Country of manuf.: Taiwan
Interface: Mini PCIe
PCIe 2.0
Form factor tags: Mini Card
ID: 168c:0033 (9 addl. devices)
Windows: PCI\VEN_168C&DEV_0033
FCC ID: 2AE3B-AEX-AR95X, PPD-AR5BXB116
IC ID: 20662-AEXAR95X
WI1 chip1: Atheros AR9590
Probable Linux driver
ath9k (in backports)
PCI ID first seen in kernel v3.2 (2012-01-04)
(see also passys)
Windows driver
possibly see ath-drivers.eu
Antenna connector: U.FL
abgn, 3x3:3
Flags: industrial-grade
FCC ID | |
---|---|
AIRETOS AEX-AR9580-NX | 2AE3B-AEX-AR95X |
AIRETOS AEX-AR9590-NX | 2AE3B-AEX-AR95X PPD-AR5BXB116 |
AIRETOS AEX-AR9592-NI | 2AE3B-AEX-AR95X |
AIRETOS AEX-AR9592-NX | 2AE3B-AEX-AR95X |
FCC ID | |
---|---|
AIRETOS AEX-AR9590-NX | 2AE3B-AEX-AR95X PPD-AR5BXB116 |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
Industrial Grade mPCIe 802.11n 3T/3R Dual Band WiFi Module
Atheros Reference Design XB116 (QCA, P/N AR5BXB116)
- Atheros AR9590-AL1B chipset (codename Peacock)
- 3T3R Mini PCIe Wi-Fi Adapter Card
- Dual Band 802.11abgn (up to 450Mbps)
- High Power 24dbm (200mW) MIMO 3x3
According to the Family model declaration letter on the FCC,
- the following models are based on identical code design:
- AEX-AR95X
- AEX-AR9580-NX
- AEX-AR9590-NX
- AEX-AR9590-NI
- AEX-AR9590-NIB
• PCI ID • GitHub • hostapd • >> . |
---|
168c:0023 AR5416 168c:0024 AR5418 168c:0027 AR9160 168c:0029 AR9220/AR9223 168c:002a AR9280/AR9283 168c:002b AR9285 168c:002c AR2427 168c:002d AR9227 168c:002e AR9287 168c:0030 AR9380/AR9381/AR9382 168c:0032 AR9485 168c:0033 AR9580/AR9590 168c:0034 AR9462 168c:0036 AR9565 168c:0037 AR9485 Linux based AP using hostapd: Wiphy phy0 max # scan SSIDs: 4 max scan IEs length: 2257 bytes Retry short limit: 7 Retry long limit: 4 Coverage class: 0 (up to 0m) Device supports RSN-IBSS. Device supports AP-side u-APSD. Device supports T-DLS. Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * CMAC (00-0f-ac:6) Available Antennas: TX 0x7 RX 0x7 Configured Antennas: TX 0x7 RX 0x7 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point * P2P-client * P2P-GO Band 1: Capabilities: 0x11ef RX LDPC HT20/HT40 SM Power Save disabled RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-23 Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps Frequencies: * 2412 MHz [1] (30.0 dBm) * 2417 MHz [2] (30.0 dBm) * 2422 MHz [3] (30.0 dBm) * 2427 MHz [4] (30.0 dBm) * 2432 MHz [5] (30.0 dBm) * 2437 MHz [6] (30.0 dBm) * 2442 MHz [7] (30.0 dBm) * 2447 MHz [8] (30.0 dBm) * 2452 MHz [9] (30.0 dBm) * 2457 MHz [10] (30.0 dBm) * 2462 MHz [11] (30.0 dBm) * 2467 MHz [12] (disabled) * 2472 MHz [13] (disabled) * 2484 MHz [14] (disabled) Band 2: Capabilities: 0x11ef RX LDPC HT20/HT40 SM Power Save disabled RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-23 Bitrates (non-HT): * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps Frequencies: * 5180 MHz [36] (17.0 dBm) * 5200 MHz [40] (17.0 dBm) * 5220 MHz [44] (17.0 dBm) * 5240 MHz [48] (17.0 dBm) * 5260 MHz [52] (23.0 dBm) (no IR, radar detection) DFS state: usable (for 609129 sec) DFS CAC time: 60000 ms * 5280 MHz [56] (23.0 dBm) (no IR, radar detection) DFS state: usable (for 609129 sec) DFS CAC time: 60000 ms * 5300 MHz [60] (23.0 dBm) (no IR, radar detection) DFS state: usable (for 609129 sec) DFS CAC time: 60000 ms * 5320 MHz [64] (23.0 dBm) (no IR, radar detection) DFS state: usable (for 609129 sec) DFS CAC time: 60000 ms * 5500 MHz [100] (disabled) * 5520 MHz [104] (disabled) * 5540 MHz [108] (disabled) * 5560 MHz [112] (disabled) * 5580 MHz [116] (disabled) * 5600 MHz [120] (disabled) * 5620 MHz [124] (disabled) * 5640 MHz [128] (disabled) * 5660 MHz [132] (disabled) * 5680 MHz [136] (disabled) * 5700 MHz [140] (disabled) * 5745 MHz [149] (30.0 dBm) * 5765 MHz [153] (30.0 dBm) * 5785 MHz [157] (30.0 dBm) * 5805 MHz [161] (30.0 dBm) * 5825 MHz [165] (30.0 dBm) Supported commands: * new_interface * set_interface * new_key * start_ap * new_station * new_mpath * set_mesh_config * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * frame * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * tdls_mgmt * tdls_oper * probe_client * set_noack_map * register_beacons * start_p2p_device * set_mcast_rate * Unknown command (104) * connect * disconnect Supported TX frame types: * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 Supported RX frame types: * IBSS: 0x40 0xb0 0xc0 0xd0 * managed: 0x40 0xd0 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * mesh point: 0xb0 0xc0 0xd0 * P2P-client: 0x40 0xd0 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * P2P-device: 0x40 0xd0 software interface modes (can always be added): * AP/VLAN * monitor valid interface combinations: * #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1, total <= 2048, #channels <= 1, STA/AP BI must match * #{ WDS } <= 2048, total <= 2048, #channels <= 1, STA/AP BI must match HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing Device supports TX status socket option. Device supports HT-IBSS. Device supports SAE with AUTHENTICATE command Device supports low priority scan. Device supports scan flush. Device supports AP scan. Device supports per-vif TX power setting Driver supports a userspace MPM Device supports active monitor (which will ACK incoming frames) Driver/device bandwidth changes during BSS lifetime (AP/GO mode) |
See also
- AIRETOS AEX-QCA9880-NX - 802.11abgn/ac 3T3R Dual Band WLAN Module,
- QCA9880, Extended Temperature Grade, Full Size Mini PCI Express Module
- AIRETOS AEH-AR9462-LC - 802.11abgn Dual Band Combo WiFi & BT 4.0 Module,
- Atheros AR9462 chipset - WB222 (AR5B22), 2T2R Mini PCIe Half-Size Module
- AIRETOS AEH-AR9485-NC - 802.11bgn 1T2R WiFi Mini PCIe Half-Size Module,
- Atheros AR9485 chipset - Reference Design HB125 (AR5B125)