Amped Wireless SR10000
Amped Wireless SR10000
Manuf (OEM/ODM): Loopcomm
Type: extender, repeater
FCC ID: ZTT-SR10000
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Realtek RTL8196C
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Brand? Model?)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Brand? Model?)
Expansion IFs: none specified
WI1 chip1: Realtek RTL8192CE
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: RP-SMA
ETH chip1: Realtek RTL8196C
Switch: Realtek RTL8196C
LAN speed: 100M
LAN ports: 5
bgn
Flags: high power
Default SSID: Amped_SR
Default IP address: 192.168.1.240
the IP 192.168.1.240 is used by 21 additional devices
of which 11 are Amped Wireless devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 7 are Amped Wireless devices
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
High Power Wireless-N 600mW Smart Repeater
Product page
"L000033 RE:V2.2" is silkscreened on the board in the FCC photos. The hardware is the same as the Amped Wireless R10000 and is thus assumed to have 4MB Flash and 32MB RAM.
The default SSID, according to the FCC label, is Amped_SR. The default PSK should be wireless.