Askey WLU5053
Askey WLU5053 -D4(RoHS)
FCC approval date: 04 January 2013
Country of manuf.: China
Interface: USB (non-standard connector)
USB 2.0
Form factor tags: module
ID: 0930:0a0b
Windows: USB\VID_0930&PID_0A0B
FCC ID: H8N-WLU5053
IC ID: 1353A-WLU5053
WI1 chip1: Broadcom BCM43236B
Probable Linux driver
brcmfmac
USB ID not yet observed in any mainline kernel /
this list (note: outdated)
(see also passys)
Windows driver
these might work, maybe
5.100.68.46 (possibly 6.30.145.26) for XP
note: 5GHz support disabled as it seems to be broken - replace BCM43XNGD with BCM43XNMD in .inf file for your device if you wish to test it
or
5.100.68.46 for Vista/Win7
Antenna connector: none
abgn, 2x2:2
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
This module would appear to be for certain Toshiba HDTVs.
The data lines for this device seem to be swapped.
- Green = Data +, White = Data -
This device does work with brcmfmac, to some extent (5 GHz channels don't work), after the device ID is added at runtime (modprobe brcmfmac; echo "0930 0a0b" > /sys/bus/usb/drivers/brcmfmac/new_id;).
Info dump
• lsusb -v |
---|
Bus 002 Device 052: ID 0930:0a0b Toshiba Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0930 Toshiba Corp. idProduct 0x0a0b bcdDevice 0.01 iManufacturer 1 Broadcom iProduct 2 Remote Download Wireless Adapter iSerial 3 000000000001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 46 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 200mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 2 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 1.10 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) |
• iw list |
---|
Wiphy phy43 Band 1: Capabilities: 0x1020 HT20 Static SM Power Save RX HT20 SGI No RX STBC Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 16 usec (0x07) HT RX MCS rate indexes supported: 0-7 HT TX MCS rate indexes are undefined Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) * 2472 MHz [13] (20.0 dBm) * 2484 MHz [14] (20.0 dBm) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 10 max scan IEs length: 2048 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * CMAC (00-0f-ac:6) Available Antennas: TX 0 RX 0 Supported interface modes: * IBSS * managed * AP * P2P-client * P2P-GO * Unknown mode (10) software interface modes (can always be added): valid interface combinations: * #{ IBSS, managed, AP } <= 2, #{ P2P-client, P2P-GO } <= 1, #{ Unknown mode (10) } <= 1, total <= 3, #channels <= 2 Supported commands: * new_interface * set_interface * new_key * new_beacon * join_ibss * set_pmksa * del_pmksa * flush_pmksa * remain_on_channel * action * set_channel * Unknown command (75) * Unknown command (89) * testmode * connect * disconnect Supported TX frame types: * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * Unknown mode (10): 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 Supported RX frame types: * managed: 0x40 0xd0 * P2P-client: 0x40 0xd0 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * Unknown mode (10): 0x40 0xd0 |
bcmid dump
sudo ./bcmid 0930 0a0b [id] chip: A8E4 [id] chiprev: 0003
brcmfmac log dump
usbcore: registered new interface driver brcmfmac brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Nov 30 2011 17:33:42 version 5.90.188.22 brcmfmac: brcmf_fil_cmd_data: Failed err=-23 brcmfmac: brcmf_fil_cmd_data: Failed err=-23 brcmfmac: brcmf_fil_cmd_data: Failed err=-23 userif-2: sent link down event. userif-2: sent link up event