Aspire Atlantis V2 Sub-Ohm Tank
Product Details | |
---|---|
Brand Model Rev | Aspire Atlantis V2 |
Product Page | http://www.aspirecig.com/products/Atlantis/ |
Material | Stainless steel & Glass |
Size | 2"L x 7/8"D (without drip tip), 22mm |
Capacity | 3ml |
Thread | 510 |
Type | sub-ohm tank |
Description
Atlantis v2.0 by Aspire is the upgraded version of the popular Atlantis. This innovative tank system brings new improvements such as an improved adjustable airflow which allows the air to flow more easily and conveniently.
The Atlantis v2.0 features a larger 3ml capacity compared to the original 2ml capacity of the Atlantis. The Atlantis 2.0 features a new cooling system located at the top of the tank which allows you to adjust the temperature of vapor by rotating the valve to control the amount of external air. The Atlantis 2.0 also features a large stainless round drip which provides a RDA-like experience.
The Atlantis v2.0 features new sub-ohm 100% organic cotton coils that help vapers experience a purer taste and bigger clouds than the previous model. 1.0ohm, 0.5ohm, and 0.3 ohm coils are all available for Atlantis 2.0.
Coils
Atlantis Coils
- 0.3Ω (rated at 70-80 watts) Φ0.7mm Spacing:1.5-2mm
- 0.5Ω (rated at 20-30 watts) Φ0.4mm Spacing:1.5-2mm
- 1.0Ω (rated at 40-50 watts) Φ0.4mm Spacing:1.5-2mm
Triton Coils
- 0.15Ω Ni200 Coil
- 0.3Ω 316L - 45 to 55W
- 0.4Ω 316L - 25 to 30W
- 0.5Ω Clapton -
- 1.8Ω Kanthal - 10 to 13W
Stainless Steel in Temperature Control, In my opinion, is not accurate below 0.5 ohms. Compatible With:
- Aspire Triton Tank
- Aspire Atlantis (v1)
- Aspire Atlantis Mega
- Sense Herakles Tank(not Plus)
- Eleaf Melo Tank
- Eleaf iJust 2 Tank
Filled from the bottom: Unscrew the base and fill tank to the while avoiding the metal airflow tube in the center.
Warning: This tank uses sub-ohm resistance coils. This tank should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.3ohm coil, your mod must be able to fire atomizers of 0.3ohm or lower. You must be also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 30 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.
Tip for new users: We strongly suggest 6mg eLiquid or lower with this atomizer. Sub-ohm atomizers produce higher throat hit than low and standard resistance atomizers. Using this atomizer with a nicotine level above 6mg will usually taste burnt or harsh.