Belkin F5D7230-4 v4
Belkin F5D7230-4 v4
Manuf (OEM/ODM): SerComm
FCC approval date: 19 April 2005
Country of manuf.: China
Type: wireless router
FCC ID: K7SF5D7230A
Power: 4.5 VDC, 1.5 A
Connector type: barrel
CPU1: Marvell 88W8510
FLA1: 1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> (Macronix MX29LV800BTTC-70)
RAM1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (EtronTech EM636165TS-6 × 2)
Expansion IFs: none specified
WI1 chip1: Marvell 88W8510
WI1 chip2: Marvell 88W8010
WI1 802dot11 protocols: bg
WI1 antenna connector: none
ETH chip1: Marvell 88W8510
Switch: Marvell 88E6060
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bg
Default SSID: Marvell-AP32 (3 addl. devices)
, belkin54g (12 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 294 additional devices
of which 97 are Belkin devices
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| Belkin F5D7230-4 v1 | Broadcom | Broadcom | Broadcom |
| Belkin F5D7230-4 v1 (v1444) | Broadcom | Broadcom | Broadcom |
| Belkin F5D7230-4 v2 | Broadcom | Broadcom | Broadcom |
| Belkin F5D7230-4 v3 | Broadcom | Broadcom | Broadcom |
| Belkin F5D7230-4 v4 | Marvell | Marvell | Marvell |
| Belkin F5D7230-4 v5 | Atheros | Atheros | |
| Belkin F5D7230-4 v6 | Marvell | Marvell | Marvell |
| Belkin F5D7230-4 v7 | Atheros | Atheros | |
| Belkin F5D7230-4 v8 | Broadcom | Broadcom | |
| Belkin F5D7230-4 v9 | Realtek | Realtek | Realtek |
| Belkin F5D7230-4 vA | Atheros | Atheros |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
Wireless G Router
• Support page
"4900RZ00B" is silkscreened on the board in the FCC photos and the below board image from the DD-WRT forums.
Board image on the DD-WRT forums
Some specs mentioned on the DD-WRT forums (which is all visible in the above board image)
F5D7230-4 series on SeattleWireless
- On reboot, network with SSID 'marvell-ap32' can be seen - this is assumed to instead be Marvell-AP32 based on WiGLE data, which is also used by other routers based on the Marvell AP-32 reference design
- Default SSID: belkin54g
Images
ver 4000tt (from wimpi on the DD-WRT forums)
board top
board bottom
