Belkin F5D7230-4 v8
Belkin F5D7230-4 v8
Manuf (OEM/ODM): SerComm
FCC approval date: 08 October 2007
Country of manuf.: China
Type: wireless router
FCC ID: K7SF5D7230D
IC ID: 3623A-F5D7230D
Power: 5 VDC, 1 A
Connector type: barrel
Conn. measurements: 4.5 mm (OD), 2 mm (ID), 6.5 mm (LEN)
CPU1: Broadcom BCM5354
FLA1: 1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> (Macronix MX25L8005M2C-15G)
RAM1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (PSC A2V64S40CTP-G6)
Expansion IFs: none specified
WI1 chip1: Broadcom BCM5354
WI1 802dot11 protocols: bg
WI1 antenna connector: none
ETH chip1: Broadcom BCM5354
Switch: Broadcom BCM5354
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bg
Default SSID: belkin54g (12 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 294 additional devices
of which 97 are Belkin devices
802dot11 OUI: 00:17:3F (10 E, 26 W), 00:1C:DF (16 E, 33 W)
Ethernet OUI: 00:17:3F (10 E, 26 W), 00:1C:DF (16 E, 33 W)
| FCC ID | |
|---|---|
| Dynex DX-WGRTR | K7SF5D7230D |
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| Belkin F5D7230-4 v1 | Broadcom | Broadcom | Broadcom |
| Belkin F5D7230-4 v1 (v1444) | Broadcom | Broadcom | Broadcom |
| Belkin F5D7230-4 v2 | Broadcom | Broadcom | Broadcom |
| Belkin F5D7230-4 v3 | Broadcom | Broadcom | Broadcom |
| Belkin F5D7230-4 v4 | Marvell | Marvell | Marvell |
| Belkin F5D7230-4 v5 | Atheros | Atheros | |
| Belkin F5D7230-4 v6 | Marvell | Marvell | Marvell |
| Belkin F5D7230-4 v7 | Atheros | Atheros | |
| Belkin F5D7230-4 v8 | Broadcom | Broadcom | |
| Belkin F5D7230-4 v9 | Realtek | Realtek | Realtek |
| Belkin F5D7230-4 vA | Atheros | Atheros |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Wireless G Router
• Support page
OEM SerComm (YGH00E-1.0)
The device appears to share the same board ID with the Belkin F5D7231-4 v3 / Dynex DX-WEGRTR.
On the DD-WRT known incompatible devices list.
Images on the DD-WRT forum
F5D7230-4 series on SeattleWireless
The power adapter that came with the device is a DVE DSA-5W-05 AUS 050100 (5V, 1A). ID/OD/Len measurements are approximate.
Images
- external
angled
front panel
bottom
label
back
power adapter
- internal
board top, in case
board top
carefully exposed CPU
Flash
SerComm board ID
board bottom
RAM
- mirrored from the DD-WRT forums
main board
BCM5354 CPU
Flash
