Belkin F5D9230-4 v5
Belkin F5D9230-4 ver. 5000
Manuf (OEM/ODM): Gemtek WRTR-216G
Type: wireless router
FCC ID: K7SF5D9230E
IC ID: 3623A-F5D9230E
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Ralink RT2680
FLA1: 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX29LV320CBTC-90G)
RAM1: 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (EtronTech EM638165TS-6G × 2)
Expansion IFs: none specified
WI1 chip1: Ralink RT2680
WI1 chip2: Ralink RT2720
WI1 802dot11 protocols: bg
WI1 MIMO config: 1x2:1
WI1 antenna connector: none
ETH chip1: Ralink RT2680
Switch: IC+ IP175C
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bg
Additional chips
2.4GHz Power Amplifier IC;Richwave;RTC6691;065, 6691, A722;1;
Default SSID: Belkin_G_Plus_MIMO_XXXXXX (1 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 295 additional devices
of which 97 are Belkin devices
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
Belkin F5D9230-4 v1 | Airgo | Airgo | |
Belkin F5D9230-4 v2 | Airgo | Airgo | |
Belkin F5D9230-4 v3 | RDC | Ralink | Ralink |
Belkin F5D9230-4 v4 | AMRISC | Ralink | Ralink |
Belkin F5D9230-4 v5 | Ralink | Ralink | Ralink |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Wireless G+ MIMO Router
• Support page
OEM Gemtek WRTR-216G (WRTR-216G_V01)
The default SSID is Belkin_G_Plus_MIMO_XXXXXX where XXXXXX is the last three octets of the wireless interface MAC address (upper case letters).