Belkin F7D6301 v1

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Belkin F7D6301 v1

Manuf (OEM/ODM): Arcadyan

FCC approval date: 12 February 2010
Country of manuf.: China

Type: wireless router

Power: 9 VDC, 1 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 3 mm (ID), 10.5 mm (LEN)

CPU1: Ralink RT3052
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Macronix MX25L1605AM2I)
RAM1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (EtronTech EM638165TS-7G)

Expansion IFs: none specified

WI1 chip1: Ralink RT3052
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none

ETH chip1: Ralink RT3052
Switch: Ralink RT3052
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1


Default SSID: Belkin.XXXX (6 addl. devices)
Default IP address:
the IP is used by 283 additional devices
of which 97 are Belkin devices

802dot11 OUI: 94:44:52 (17 E, 22 W)
Ethernet OUI: 94:44:52 (17 E, 22 W)

Belkin F7D2301K7SF7D2301V1

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

Surf N300 Wireless Router
 • Support page

This device is identical to the Belkin F7D2301.

The default SSID is Belkin.XXXX where XXXX appears to 3 followed by the last three hex digits of the wireless interface MAC address (though this could be incorrect). An example SSID is Belkin.3147 with MAC 94:44:52:8D:C1:47.

"P/N: 141700520021J R0B" appears to be silkscreened on the board in the FCC photos.