Belkin F7D7602 v1

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Belkin F7D7602 v1

FCC approval date: 19 March 2013
Country of manuf.: China

Type: camera

FCC ID: K7SF7D7602V1
IC ID: 3623A-F7D7602V1
PCB ID: 75053503

Power: 5 VDC, 1 A
Connector type: barrel

CPU1: Ralink RT5350
CPU2: AIT AIT8431T
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond W25Q128FVSG)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Winbond W9825G6JH-6 × 2)

Expansion IFs: none specified

WI1 chip1: Ralink RT5350
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none

ETH chip1: Ralink RT5350
LAN speed: 100M
LAN ports: 1

bgn

Additional chips
Multimedia Processor;AIT;AIT8431T;;1;
Mono Audio Codec;Nuvoton;NAU8810YG;;1;

Default SSID: NetCamHDXXXX (1 addl. devices)

802dot11 OUI: EC:1A:59 (3 E, 11 W)

For a list of all currently documented AIT chipsets with specifications, see AIT.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.


NetCam HD

"75053503", "2013-01-17", and "REV1.0" is silkscreened

on the board in the FCC photos.

Also per the FCC photos, this device is using...

  • Ralink RT5350 802.11bgn 1T1R WiSoC
  • Winbond W25Q128FVSG (25Q128FVSG) 16MB Flash chip
  • 2x Winbond W9825G6JH-6 (32MB each, 64MB total) RAM
  • an AIT AIT8431T Multimedia Processor
  • a Nuvoton NAU8810YG Mono Audio Codec

Per the FCC label and the example label in the external photos...

  • the device has a default setup SSID pattern of NetCamHDXXXX
(where XXXX appears to be the last 4 digits of the wireless
interface MAC [upper case letters])
  • the device will use a EC:1A:59 OUI