Cisco Meraki MR34
Cisco Meraki MR34
Manuf (OEM/ODM): Arcadyan EAP1018FB-FLF-MK
FCC approval date: 16 September 2013
Country of manuf.: Taiwan
Type: managed access point
FCC ID: UDX-60025010
IC ID: 6961A-60025010
Power: 12 VDC, 1.5 A
Connector type: barrel
Conn. measurements: 2.1 mm (OD), 5 mm (ID)
PoE tag: 802.3at, standard
CPU1: Freescale Semiconductor P1020
FLA1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Hynix Model?)
RAM1: 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Brand? Model? × 2)
Expansion IFs: Mini PCIe
Mini PCIe slots: 2
WI1 module: Broadcom BCM943460MC
WI1 module IF: Mini PCIe (oversized)
WI1 chip1: Broadcom BCM43460
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL
WI2 module: Broadcom BCM943431MC
WI2 module IF: Mini PCIe
WI2 chip1: Broadcom BCM43431
WI2 802dot11 protocols: bgn
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL
ETH chip1: Freescale Semiconductor P1020
LAN speed: 1G
LAN ports: 1
abgn+ac
802dot11 OUI: none specified
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
Per the FCC photos...
- The Air Marshall radio is a BCM43428 (BCM43428KMLG, HT1137 P20, 160994 6 W;)
Per the info on Cisco Meraki's product page..
- PBGA SoC chip package
- The device has two Mini PCIe wireless module.
- One 3x3 bgn module BCM43431KMLG
- One 3x3 ac+an module BCM43460KMLG
- There is an on-board (dual-band, single-stream) 'security radio' (for Air Marshall functionality [rogue AP detection + mitigation, etc.]) - may handle spectrum analysis functionality as well (maybe)
Per the datasheet..
- Beamforming is supported
- For non-PoE power, barrel specs are 5 mm OD, 2.1 mm ID, center positive..
- Operation is possible w/ 802.3af PoE, with reduced functionality (max. 13.87 W 3af, max. 18 W 3at)
- The dimensions of the device are 253.4 mm x 155.8 mm x 37.1 mm, not including the desk mount feet or mount plate.
- The device weighs 25 oz / 0.7 kg700 g <br />24.689 oz <br />1.544 lbs <br />.
Power adapters specified in the FCC test report are..
- Powertron PA1015-2HU (100-240VAC ~ 50-60Hz, 0.4A -> 12VDC, 1.5A)
- PoE: PowerDsine PD-9501G/AC (100-240VAC ~ 50-60Hz, 1.5A -> 55VDC, 1.35A)