Cisco RAN201
Cisco RAN201
Manuf (OEM/ODM): SerComm
FCC approval date: 22 September 2010
Country of manuf.: China
Type: wireless router, dsl modem
FCC ID: LDK-RAN201
IC ID: 2461B-RAN201
PCB ID: YQN00D-1.6
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Ralink RT3050
CPU2: Infineon PSB 50600
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Brand? Model?)
FLA2: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Brand? Model?)
RAM1: 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (EtronTech EM638165TS-6G)
RAM2: 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (EtronTech EM63A165TS-6G)
Expansion IFs: none specified
WI1 chip1: Ralink RT3050
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none
ETH chip1: Ralink RT3050
Switch: Ralink RT3050
LAN speed: 100M
LAN ports: 4
bgn
Flags: ADSL2+
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 18 are Cisco devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1327 additional devices
of which 13 are Cisco devices
802dot11 OUI: none specified
For a list of all currently documented Infineon (Lantiq) chipsets with specifications, see Infineon.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Wireless-N Home ADSL2+ Modem Router
"YQN00D-1.6" and the Cisco logo is silkscreened on the board in the FCC photos.
- The same SerComm text is found on the Linksys WAG120N's (FCC EUT) board.
Default settings are per the FCC manual.
- Wi-Fi Certified : WFA8759 (as of 02/24/2010)
