D-Link DAP-1353 rev B1
D-Link DAP-1353 B1
Manuf (OEM/ODM): Alpha Networks
FCC approval date: 19 July 2009
Country of manuf.: China
Type: access point
FCC ID: KA2AP1353B1
IC ID: 4216A-AP1353
Power: 5 VDC, 2.5 A
Connector type: barrel
CPU1: Atheros AR9132
FLA1: 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Macronix MX29LV128DBT2I-90Q)
RAM1: 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Micron MT46V32M16-5B)
Expansion IFs: none specified
WI1 chip1: Atheros AR9132
WI1 chip2: Atheros Model?
WI1 802dot11 protocols: bgn
WI1 MIMO config: 3x3:2
WI1 antenna connector: U.FL, RP-SMA
ETH chip1: Atheros AR9132
ETH chip2: Atheros Model?
LAN speed: 100M
LAN ports: 1
bgn
Default IP address: 192.168.0.50
the IP 192.168.0.50 is used by 63 additional devices
of which 63 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 344 additional devices
of which 180 are D-Link devices
802dot11 OUI: none specified
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
D-Link DAP-1353 rev A1 | Intel | Atheros | Atheros |
D-Link DAP-1353 rev B1 | Atheros | Atheros | Atheros |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
Wireless N Access Point
"8WAPND03.0B1G" looks to be silkscreened on the board in the FCC photos.
- The (mostly) same board appears to be used by the D-Link DAP-2553 rev A1, however, this model lacks a populated PoE section, is single-band only, and only supports Fast Ethernet