D-Link DAP-1560
D-Link DAP-1560 A1
Manuf (OEM/ODM): Cameo
Type: access point, bridge
FCC ID: KA2AP1560A1
Power: 5 VDC, 2.5 A
Connector type: barrel
CPU1: Qualcomm WCN1320
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Winbond Model?)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Winbond W9825G2JB-6)
Expansion IFs: none specified
WI1 chip1: Qualcomm WCN1320
WI1 802dot11 protocols: abgn
WI1 MIMO config: 4x4:4
WI1 antenna connector: U.FL
ETH chip1: Qualcomm WCN1320
ETH chip2: Realtek RTL8211CL
LAN speed: 1G
LAN ports: 1
abgn
Flags: MIMO
Default IP address: 192.168.0.50
the IP 192.168.0.50 is used by 63 additional devices
of which 63 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 344 additional devices
of which 180 are D-Link devices
802dot11 OUI: none specified
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
Media Streaming Adapter
"21518D1560A11A1" and "REV: A1" is silkscreened on the board in the FCC photos.
- It would seem that Cameo is the probable manufacturer of this device.
Also known as:
- D-Link Rush
- Xtreme N600 Duo HD MediaBridge Kit
- DAP-1562 Media Streaming Kit
The DAP-1562 Media Streaming Kit includes two DAP-1560 adapters.
Wi-Fi Certified : WFA9358 (as of 08/09/2010)
The certification states the device is three-stream for both bands but it is most
- likely four-stream since D-Link claims 600Mbps speeds and non-standard
- 256-QAM was not found in 802.11n at the time that this was released.