D-Link DAP-2660 rev A1
D-Link DAP-2660 A1
Manuf (OEM/ODM): Alpha Networks WAP-AC09
FCC approval date: 25 April 2014
Country of manuf.: China
Type: access point
FCC ID: KA2AP2660A1
IC ID: 4216A-AP2660A1
Power: 12 VDC, 1 A
Connector type: barrel
PoE tag: 802.3af, standard
CPU1: Qualcomm Atheros QCA9557
FLA1: 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond W25Q128FVSG)
RAM1: 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Winbond W9751G6KB-25 × 2)
Expansion IFs: none specified
Serial: yes, internal, 5-pin header
WI1 chip1: Qualcomm Atheros QCA9557
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
WI2 chip1: Qualcomm Atheros QCA9882-BR4A
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL
ETH chip1: Qualcomm Atheros QCA9557
ETH chip2: Atheros AR8035-A
LAN speed: 1G
LAN ports: 1
abgn+ac
Additional chips
2.4GHz Power Amplifier IC;Skyworks;SE2576L;SiGe, 2576L, 343FX;2;
5GHz Power Amplifier IC;Skyworks;SE5003L1;5003L1, 340FM, 1340 MY;2;
802.3af/at PoE Powered Device controller;Texas Instruments;TPS23754;TPS23754, 28TG4, A6CT;1;
Default IP address: 192.168.0.50
the IP 192.168.0.50 is used by 63 additional devices
of which 63 are D-Link devices
802dot11 OUI: none specified
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
Wireless AC1200 Concurrent Dual Band PoE Access Point
"WAPAC09" is silkscreened on the board in the FCC photos.
Wi-Fi Certified : WFA53880 (as of 04/22/2014)
