D-Link DIR-600 rev B1
D-Link DIR-600 B1
Availability: now
Manuf (OEM/ODM): Alpha Networks WRG-N23 .4A1G
FCC approval date: 28 April 2009
Country of manuf.: China
Type: wireless router
FCC ID: KA2DIR300B1
Power: 5 VDC, 1.2 A
Connector type: barrel
CPU1: Ralink RT3050F (320 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX29LV320DBTI-70G)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Winbond W9825G6EH-6)
Expansion IFs: none specified
Serial: yes, 4-pin header
WI1 chip1: Ralink RT3050F
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none
ETH chip1: Ralink RT3050F
Switch: Ralink RT3050F
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 220 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 345 additional devices
of which 180 are D-Link devices
802dot11 OUI: 00:26:5A (10 E, 12 W), 1C:7E:E5 (6 E, 6 W)
Ethernet OUI: 00:26:5A (10 E, 12 W), 1C:7E:E5 (6 E, 6 W)
| FCC ID | |
|---|---|
| D-Link DIR-300 rev B1 | KA2DIR300B1 |
| D-Link DIR-600 rev B2 | KA2DIR300B1 |
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| D-Link DIR-600 rev A1 | Atheros | Atheros | |
| D-Link DIR-600 rev B1 | Ralink | Ralink | |
| D-Link DIR-600 rev B2 | Ralink | Ralink | |
| D-Link DIR-600 rev B5 | Ralink | Ralink | |
| D-Link DIR-600 rev C1 | Ralink | Ralink | |
| D-Link DIR-600 rev C2 | Ralink | Ralink | |
| D-Link DIR-600 rev D1 | Ralink | Ralink |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
N150 Wireless Router
DIR-600 rev B1 hardware are same as in D-Link DIR-300 rev B1
"8WRGN23..4A1G" and "0931" is silkscreened on the board in the photos.
Wiki's
Forum threads
Teardown
How to open the DIR-600 (see pictures):
- Remove the two mounting screws that are located under the rubber paddings.
- The top cover is secured by 4 latches on three sides.
- Use a flat head screw driver to open the latches to the left and right, then lift
- off the top cover. Be gentle with these latches as they can break very easily.
Images
from User:Zerohero
Printed Circuit Board
PCB Top Side
PCB Bottom Side
Bottom View
Latches (Detail)
