D-Link DVG-G5402SP
D-Link DVG-G5402 SP
Manuf (OEM/ODM): OctTel
FCC approval date: 03 December 2007
Country of manuf.: Taiwan
Type: wireless router, analog phone gateway
FCC ID: KA2DVGG5402SP
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Realtek RTL8186V
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Spansion Model?)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (EtronTech EM639165TS-7)
Expansion IFs: none specified
Serial: yes, internal, 4-pin header, 3.3V TTL
WI1 chip1: Realtek RTL8186V
WI1 chip2: Realtek RTL8225
WI1 802dot11 protocols: bg
WI1 antenna connector: U.FL, RP-SMA
ETH chip1: Realtek RTL8186V
Switch: Realtek RTL8306S
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bg
Additional chips
2.4GHz Power Amplifier IC;Microchip;SST12LP14A;;1;InGaP/GaAs;QFN-16;3mmx3mm;
Default SSID: DVG-G5402SP
Default IP address: 192.168.8.254
Default login user: admin
Default login password: blank
admin:blank credentials used by 340 additional devices
of which 180 are D-Link devices
802dot11 OUI: none specified
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
VoIP Wireless Router
- Product page (TH)
The manufacturer stated in the FCC test report is OctTel Comm. Co., Ltd..
Per the FCC label, the default SSID is DVG-G5402SP.
- There is moderate WiGLE support for this SSID.
Probable used PSU(s)
The power supply shown in the FCC photos is a
- Li Tone Electronics LTE12W-S2.
| Li Tone Electronics LTE12W-S2 (more) | |||||
|---|---|---|---|---|---|
| Input: 100-240 VAC ~ 47-63 Hz, ? A | |||||
| Input connector: NEMA 1-15P Style: large, straight Manuf. in: China | |||||
| Output: 12 VDC, 1 A | |||||
| Output connector: barrel (center +) OD: ?? ID: ?? LEN: ?? | |||||
