D-Link DWL-2100AP rev A4

D-Link DWL-2100AP A4
Availability: EoL

Manuf (OEM/ODM): Alpha Networks WAP-D19

FCC approval date: 15 July 2004
UPC: 790069263958 (UPC DB, On eBay)
Country of manuf.: China

Amazon image

ASIN
B00019EYVG (, On Amazon, On CCC)
multiple revisions of this device, use caution

Type: access point

FCC ID: RRK2004042018-1
IC ID: 4216A-WL2100AP

Power: 5 VDC, 2 A
Connector type: barrel

CPU1: Atheros AR2313A (180 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Atmel AT49BV322A-70TI)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Mira P2V28S40BTP)

Expansion IFs: none specified
JTAG: yes
Serial: yes, 3.3V TTL

WI1 chip1: Atheros AR2313A
WI1 chip2: Atheros AR2112
WI1 802dot11 protocols: bg
WI1 antenna connector: RP-SMA

ETH chip1: Atheros AR2313A
ETH chip2: IC+ IP101A
LAN speed: 100M
LAN ports: 1

bg

TPFirmware supported: OpenWrt • (List | Dev | DLs)

Default IP address: 192.168.0.50
the IP 192.168.0.50 is used by 63 additional devices
of which 63 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 340 additional devices
of which 180 are D-Link devices

802dot11 OUI: 00:19:5B (9 E, 25 W), 00:1C:F0 (12 E, 19 W), 00:22:B0 (4 E, 10 W)
Ethernet OUI: 00:19:5B (9 E, 25 W), 00:1C:F0 (12 E, 19 W), 00:22:B0 (4 E, 10 W)

	FCC ID
D-Link DWL-2100AP rev A5	RRK2004042018-1

	CPU1 brand	WI1 chip1 brand	WI1 chip2 brand
D-Link DWL-2100AP rev A4	Atheros	Atheros	Atheros
D-Link DWL-2100AP rev A5	Atheros	Atheros	Atheros

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

---

AirPlus XtremeG Wireless Access Point

Product page (RU)  • Support page

"8WAPD19..3A1" is silkscreened on the board in the FCC photos.

OEM: Alpha Networks WAP-D19

Chips

• CPU: Atheros AR2313A WiSoC
• Wireless tranciever: Atheros AR2112A
• Ethernet-MII bridge: IC+ IP101A
• Ethernet MDI/X detection: TS6121C
• Flash: AMD M29LV320DB (4MB)
• RAM: ICSI IC42S16800-7T (16MB)

The DD-WRT router database states that A1 uses the AR2312

and the A2/A3/A4 versions use the AR2313A.

Hardware

• DWL-2100AP on SOWN Wiki

D-Link Hardware revision: A4, Firmware revision: 2.20EU

• CPU: Atheros AR2313A-001, B52307B, 0635 TAIWAN
• Flash: Spansion S29GL032M90TFIR4, 0634CRM-K (4MB)
• RAM: ESMT M12L128168A-7T, AZG1P536E, 0610 (16MB)
• Eth: IC+ IP101A-LF, 0640C15, KPF0005.1 (10/100Mbps)

Links

• On the OpenWrt Wiki
• On the DD-WRT forums
• How to increase DWL-2100AP Power and Frequency Range

(via the Wayback Machine)

• More information (in German) (via the Wayback Machine)

Serial

• Serial connector: JP2
• JTAG connector: J5

Pinouts

pin4	pin3	pin2	empty	pin1
RX	Ground	VCC +3.3V	-	TX

Images

• internal
• 

  board top of DWL-2100AP rev. A1

• 

  board top of DWL-2100AP rev. A4