D-Link DWL-2100AP rev A5

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

D-Link DWL-2100AP A5

Manuf (OEM/ODM): Alpha Networks

FCC approval date: 15 July 2004
Country of manuf.: China

Type: access point

Power: 5 VDC, 2 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2 mm (ID), 10 mm (LEN)

CPU1: Atheros AR2313A
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX29LV320DBTI-70G)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (ESMT M12L128168A-7T)

Expansion IFs: none specified
JTAG: yes
Serial: yes, internal, unpopulated, 3.3V TTL, 4-pin header

WI1 chip1: Atheros AR2313A
WI1 chip2: Atheros AR2112A
WI1 802dot11 protocols: bg
WI1 antenna connector: RP-SMA

ETH chip1: Atheros AR2313A
ETH chip2: IC+ IP101A
LAN speed: 100M
LAN ports: 1

bg

Default SSID: dlink (38 addl. devices)
Default IP address: 192.168.0.50
the IP 192.168.0.50 is used by 63 additional devices
of which 63 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 340 additional devices
of which 180 are D-Link devices

802dot11 OUI: 14:D6:4D (9 E, 9 W)
Ethernet OUI: 14:D6:4D (9 E, 9 W)

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

XtremeG 108M Wireless Access Point

Standard bandwidth: 54 Mbit/s, Maximum bandwidth: 108 Mbit/s
(only via D-Link device with XtremeG 108M: DWL-G520, DWL-G520+, DWL-G132)

Hardware

D-Link hardware revision A4, firmware revision 2.20EU

  • CPU: Atheros AR2313A-001 B52307B 0635 TAIWAN
  • RAM: ESMT M12L128168A-7T AZG1P536E 0610 (16MB)
  • Flash: Spansion S29GL032M90TFIR4 0634CRM-K (4MB)
  • Eth: IC+ IP101A-LF 0640C15 KPF0005.1 (10/100Mbps)

Fotum threads

Internal connectors

JTAG connector: J5
Serial connector: JP2
Pinouts

pin4 pin3 pin2 empty pin1
RX Ground VCC +3.3V  -  TX

(See Pic.2.)

Notes

1. Rexxer reportes about power currency: with 5V 1A DWL-2100AP worked fine.
2. Serial port with TTL levels, don't plug to RS232C otherwise CPU will be damaged!
It is need interface converter between Serial port of AP and RS232C port of PC.
3. Board like DWL-2100AP Rev. A4. Same board used in the DWL-2100 (North America/Europe),
DWL-2010 (North America), DWL-2200 (North America/Europe) and Alpha Networks WAPD19.
List of devices printed at top left corner of the board.
4. Board marked with text "8WAPD19..9A1G"
5. Board contain small internal anthenna (located near at LED "WLAN")
6. Admin's password length restricted to 12 characters max (may be 0..12 chars)

Administer with CLI

Some features available only via text console or telnet or SSH. Login and password same as in the web interface.
To get list of available commands type "help". For save changes and close session type "quit".

Service mode

Telnet or SSH to device, login, enter command "alpha" and next password "sdd21234". You are in the service mode.
Command "help" displays all commands (user-level and service-level).

Images

  • internal

  • Pic.1. Board top view

  • Pic.2. Serial and JTAG

  • Pic.3. Board bottom view

  • case

  • Pic.4. Case bottom


Retrieved from "https://wikidevi.wi-cat.ru/index.php?title=D-Link_DWL-2100AP_rev_A5&oldid=311915"