Edimax BR-6428n v1
Edimax BR-6428n v1
Availability: EoL
FCC approval date: 24 September 2009
Country of manuf.: China
Type: wireless router
FCC ID: NDD9564280906
PCB ID: 1244-00000285-01Z
Power: 12 VDC, 1 A
Connector type: barrel
Conn. measurements: 5 mm (OD), 2 mm (ID), 9.5 mm (LEN)
CPU1: Realtek RTL8196B
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Macronix MX29LV160DBTI-70G)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Zentel A3V28S40ETP-G6)
Expansion IFs: none specified
WI1 chip1: Realtek RTL8192SE
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
ETH chip1: Realtek RTL8196B
Switch: Realtek RTL8196B
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Default SSID: default (99 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 295 additional devices
of which 57 are Edimax devices
Default login user: admin
Default login password: 1234
admin:1234 credentials used by 185 additional devices
of which 73 are Edimax devices
802dot11 OUI: none specified
FCC ID | |
---|---|
Airlink101 AR675W | NDD9564280906 |
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
Edimax BR-6428n v1 | Realtek | Realtek | |
Edimax BR-6428n v2 | Realtek | Realtek | |
Edimax BR-6428nS v3 | Realtek | Realtek |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
N300 Wireless Broadband Router
"1244-00000285-01Z" is silkscreened on the board in the FCC photos.
This router may have only been sold under other names.
- It is, however, noted as a BR-6428n in the FCC docs.
The FCC test report has the following under the multiple listing table..
- Edimax GR-428N
- Airlink101 AR675W
- SK Broadband MW-2060AP
- CANYON CNP-WF514N3
- Getnet GR-724W
Default settings are per the FCC manual.