Gemtek WL-250F
Gemtek WL-250F
FCC approval date: 10 August 2001
Country of manuf.: Taiwan
Interface: Mini PCI
ID: 104c:ac50
Windows: PCI\VEN_104C&DEV_AC50
PnP device ID string: "Wireless LAN", "11Mbps Mini PCI", "Version 01.02", ""
FCC ID: MXF-M900820, MXFM900820, MXF-M900614
Chipset: Intersil PRISM 2
WI1 chip1: Harris HFA3841
WI1 chip2: Intersil HFA3861B
WI1 chip3: Intersil HFA3683A
Additional chips
2.4GHz Power Amplifier IC;Intersil;HFA3983;HFA, 3983IV, L0123HEFY;1;SiGe;28-lead EPTSSOP;
I/Q Modulator/Demodulator and Synthesizer;Intersil;HFA3783;HFA3783IN, M0122A023;1;SiGe;48-lead LQFP;
PCI CardBus Controller;Texas Instruments;PCI1410A;PCIbus, PCI1410A, AF 17A3LJJ;1;
Parallel Flash memory (1 Mbit);SST;SST39VF010-90-4C-WH;SST 39VF010, 90-4C-WH, MPF 0108461-D;1;
RAM chip (1 Mbit);TM Tech;T15N1024A;tm tech, 70P, CPT, T15N1024A 0114;2;
Probable Linux driver
hostap or orinoco (in backports)
PCI ID not yet observed in any mainline kernel /
this list (note: outdated)
(see also passys)
Antenna connector: U.FL
b
For a list of all currently documented Harris chipsets with specifications, see Harris.
For a list of all currently documented Intersil chipsets with specifications, see Intersil.
This device uses an HFA3861 MAC, connected to the host via a TI PCI1410 CardBus controller. It should work w/ hostap_cs / orinoco_cs.. but you will need PCMCIA support enabled / available.
- The card's PCMCIA device ID is 028a:0002.
"WL-250F Rev.00" is silkscreened on the board in the FCC photos.
It appears to have been the wireless module for an EarthWalk eBuddy (P/N: 76-090004-00).