Google Android Things Starter Kit
Google Android Things Starter Kit (i.MX7D)
Manuf (OEM/ODM): TechNexion
(Est.) release date: March 2018
(Est.) initial retail price (in USD): $200
UPC: 842776105363 (UPC DB, On eBay)
Type: development board
Power: 5 VDC, 3 A
Connector type: USB 3.0 (Type C)
CPU1: Freescale (NXP) i.MX7D (800 MHz, 2 cores)
FLA1: 4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br /> (Kingston EMMC04G-M627)
RAM1: 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (SK hynix H5TC2G63GFR-PBA × 2)
Expansion IFs: USB 2.0, MikroBus
USB ports: 1
Serial: yes, console port, USB Female Micro-B, (115200 8N1)
WI1 module: AMPAK AP6335
WI1 module IF: SDIO 3.0
WI1 chip1: Broadcom BCM4339
WI1 802dot11 protocols: abgn+ac
WI1 MIMO config: 1x1:1
WI1 antenna connector: U.FL
ETH chip1: Freescale (NXP) i.MX7D
ETH chip2: Atheros AR8035-A
LAN speed: 1GbE
LAN ports: 1
abgn+ac
Additional chips
USB to Serial UART Chip;FTDI;FT232R;;1;
Low Power Stereo Codec;NXP;SGTL5000;;1;
16x8 LED Controller Driver;Holtek;HT16K33;;1;
32Kb I2C Serial EEPROM;ON Semi;CAT24C32;;1;
7 Channel Touch Sensor IC;Atmel;AT42QT1070;;1;
Programmable-Delay Supervisory Circuit;TI;TPS3808;;1;
3A Synchronous Buck Regulator;Alpha & Omega;AOZ1021;;1;
150mA Low-Dropout Regulator;Texas Instruments;TPS717;;3;
Single Channel USB Power Switch;Texas Instruments;TPS2065;;1;
1-Bit Bidirectional Level-Shifting Voltage-Level Translator;TI;TXS0101;;2;
8-Bit Bidirectional Level-Shifting Voltage Translator;TI;TXS0108E;;3;
1A Power-Distribution Switch;Texas Instruments;TPS2061;;1;
4-Bit Bidirectional Voltage-Level Translator;TI;TXS0104E;;1;
2-Bit Bidirectional Voltage-Level Translator;TI;TXS0102;;2;
PWM Boost DC Controller;Fitipower Integrated;FP6791C;;1;
40V White LED Driver;Fitipower Integrated;FP6745;;1;
4A, 2MHz Step-Down Converter;Richtek;RT8070;;2;
Dual Bus Buffer Gate;TI;SN74LVC2G126;;1;
PMIC;NXP;MC32PF3000;;1;
Stock bootloader: U-Boot 2015.04
Stock FW OS: Linux 4.1.33 Android Things
Flags: Bluetooth 4.0, FM radio, Camera 5MP, LCD Display, temperature sensor, pressure sensor, buzzer
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
Android Things Starter Kit
The kit includes:
- • NXP i.MX7D Pico Development board
- • Pimoroni Rainbow Hat
- • 5MP Camera Module
- • 5" Multi-touch Display
- • Wi-Fi antenna
- • Supporting cables
Hardware specification
- CPU: Freescale (NXP) i.MX7D (MCIMX7D7DVM10SC) ARM
- @800MHz Dual Core (Cortex-A7)/@200MHz (Cortex-M4)
- Memory: 512MB SDRAM (DDR3L)
- Onboard Storage: 4GB (eMMC)
- Wi-Fi: 802.11abgn/ac 1T1R
- Network: 1x Gigabit Ethernet
- USB: 1x USB 2.0 port
- Power Source: 5V (USB-C)
Images