Handlink WAP-001 rev. 1

Handlink WAP-001 1

FCC approval date: 05 May 2010
Country of manuf.: Taiwan

Type: access point, in-wall access point

FCC ID: TWS-WAP-001

Power: 48 VDC, 0.15 A
Connector type: Ethernet (PoE)
PoE tag: 802.3af, standard

CPU1: Ralink RT3052
FLA1: 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix MX29LV640EBTI-70G)
RAM1: 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Mira P3V56S40ETP-G6)

Expansion IFs: none specified
Serial: yes, internal, 4-pin header, 3.3V TTL

WI1 chip1: Ralink RT3052
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none

ETH chip1: Ralink RT3052
LAN speed: 100M
LAN ports: 1

bgn

Additional chips
2.4GHz Power Amplifier IC;Skyworks;SE2597L;;2;

Default SSID: Wireless (23 addl. devices)
Default IP address: 10.59.1.254
the IP 10.59.1.254 is used by 1 additional devices
of which 1 are Handlink devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 2 are Handlink devices

802dot11 OUI: none specified

	CPU1 brand	WI1 chip1 brand	WI1 chip2 brand
Handlink WAP-001 rev. 1	Ralink	Ralink
Handlink WAP-001 rev. 2	MediaTek	MediaTek

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

---

In Wall Box Access Point

Default settings (including the SSID) are per the FCC manual. They may be inaccurate.