Handlink WAP-001 rev. 2
Handlink WAP-001 2
FCC approval date: 10 March 2014
Country of manuf.: Taiwan
Type: access point, in-wall access point
FCC ID: TWS-WAP-001R2
Power: 48 VDC, 0.15 A
Connector type: Ethernet (PoE)
PoE tag: 802.3af, standard
CPU1: MediaTek MT7620N
FLA1: ? MiB (Macronix Model?)
RAM1: 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (ESMT M14D5121632A-2.5B)
Expansion IFs: none specified
Serial: yes, internal, 4-pin header, 3.3V TTL
WI1 chip1: MediaTek MT7620N
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
ETH chip1: MediaTek MT7620N
LAN speed: 100M
LAN ports: 1
bgn
Default SSID: Wireless (23 addl. devices)
Default IP address: 10.59.1.254
the IP 10.59.1.254 is used by 1 additional devices
of which 1 are Handlink devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 2 are Handlink devices
802dot11 OUI: none specified
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| Handlink WAP-001 rev. 1 | Ralink | Ralink | |
| Handlink WAP-001 rev. 2 | MediaTek | MediaTek |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
In Wall Box Access Point
"P/N: 4600001-001"<...>, "WALL AP RF BOARD", "REV : 0A0" is silkscreened on the wireless board in the FCC photos.
- "P/N: 4600001-201__1__G", "WALL AP POWER BOARD", and "REV: 0B0" is silkscreened on the power / Ethernte board.
Default settings (including the SSID) are per the FCC manual. They may be inaccurate.
